• 대한전자공학회논문지
• /
• 제16권4호
• /
• pp.1-12
• /
• 1979

이 논문은 "한글문자의 컴퓨터 처리 : 1. 이론 "의 후편으로서 동일 subject의 실질적, 역사적 측면을 취급한다. 논문의 전반부에서는 다음 문제들을 논한다. : 한글 입출력 터미날의 기능적 설계, 모아쓰기 algorithm과 dot matrix fonts 에 의존한 한글 character generator, 입력 keyboard, 구성(keyset 와 key-stroke수 사이의 관계), binary code 의 설계를 위해 고려되어야 할 조건 등이다. 후반부는 개인적 관점에서 본 한글문자의 컴퓨터 처리의 역사론에 할당되었다. 기록화된 업적들을 주요 내용에 따라 네그룹으로 분류하였고, 시대순으로 나열될 참고문헌들의 비판적 개론을 위해 문제점들을 하나씩 거론하였다. 입력 (문자의 컴퓨터인식)과 출력 (모아쓰기의 처리)의 문제들을 분별하여 토론하였다.

• Structural Engineering and Mechanics
• /
• 제66권3호
• /
• pp.329-341
• /
• 2018

This paper considers the smooth receding contact problem between a homogeneous half-plane and a composite laminate composed of an inhomogeneously coated elastic layer. The inhomogeneity of the elastic modulus of the coating is approximated by an exponential function along the thickness dimension. The three-component structure is pressed together by either a concentrated force or uniform pressures applied at the top surface of the composite laminate. Both semianalytical and finite element analysis are performed to solve for the extent of contact and the contact pressure. In the semianalytical formulation, Fourier integral transformation of governing equations and boundary conditions leads to a singular integral equation of Cauchy-type, which can be numerically integrated by Gauss-Chebyshev quadrature to a desired degree of accuracy. In the finite element modeling, the functionally graded coating is divided into homogeneous sublayers and the shear modulus of each sublayer is assigned at its lower boundary following the predefined exponential variation. In postprocessing, the stresses of any node belonging to sublayer interfaces are averaged over its surrounding elements. The results obtained from the semianalytical analysis are successfully validated against literature results and those of the finite element modeling. Extensive parametric studies suggest the practicability of optimizing the receding contact peak stress and the extent of contact in multilayered structures by the introduction of functionally graded coatings.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.934-943
• /
• 2019

A current balance problem exists in multi-phase LLC converters due to the resonant parameter tolerance. This paper presents a current balancing method for interleaved three-phase half bridge LLC converters. This method regulates the phase shift angle of the driving signals between the three phases based on a converter with a floating Y-connection. The floating midpoint voltage has different influences on each phase current and makes the three-phase current balance performance better than midpoint non-floating systems. Phase shift control between modules can further regulate the midpoint voltage. Then three phase current sharing is realized without adding extra components. The current distributions in a midpoint non-floating system and a midpoint floating system are compared. Then the principle and implementation of the proposed control strategy are analyzed in detail. A 3kW prototype is built to verify the validity and feasibility of the proposed method.

• 한국정보과학회논문지:정보통신
• /
• 제37권5호
• /
• pp.327-338
• /
• 2010

Complete Subtree(CS)[1] 기법은 브로드캐스트암호화기법 중 비상태성을 만족시키는 부분집합-커버(Subset-Cover) 접근방법으로 그룹의 키의 배포 및 업데이트를 수행하는 방법이다. 브로드캐스트가 서비스 제공자로부터 단방향으로 이루어지는 비상태성 수신자를 가지는 환경에서는 키 관련 데이터 전송을 위해 저장 오버헤드와 통신 오버헤드가 발생한다. 본 논문에서는 효율적인 통신 오버헤드를 위해 새로운 탈퇴 기법인 Merged Complete Subtree(MCS) 기법을 제안한다. MCS 기법에서는 CS기법에서 키 암호화 키(Key Encryption Key)를 분배하기 위해 사용하는 부분집합의 구성을 단순 트리구조가 아닌 합집합 기반의 복합 구조를 취한다. 이 수정 사항은 늘어난 전체 부분집합과 그에 해당되는 키 암호화 키로 인해 보다 많은 저장 오버헤드를 필요로 하지만 CS 기법에서 헤더(header)를 구성하기 위한 두 부분집합을 하나의 합집합 형태로 표현 가능하게 함으로써 기존의 CS기법의 통신 오버헤드를 절반으로 감소시킨다. 제안된 기법은 전체 잠재적 사용자에 대한 탈퇴한 사용자의 비율이 커졌을 때 큰 이득을 가지며 공모를 통한 공격에 대하여 완벽한 저항성을 가진다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권12호
• /
• pp.1669-1674
• /
• 2005

Maximum likelihood methodology was applied to analyze the efficiency and statistical power of interval mapping by using a threshold model. The factors that affect QTL detection efficiency (e.g. QTL effect, heritability and incidence of categories) were simulated in our study. Daughter design with multiple families was applied, and the size of segregating population is 500. The results showed that the threshold model has a great advantage in parameters estimation and power of QTL mapping, and has nice efficiency and accuracy for discrete traits. In addition, the accuracy and power of QTL mapping depended on the effect of putative quantitative trait loci, the value of heritability and incidence directly. With the increase of QTL effect, heritability and incidence of categories, the accuracy and power of QTL mapping improved correspondingly.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.158-161
• /
• 2006

The numerical analysis and the experiment was performed to investigate the influences of shear connector on shear resistance capability. The numerical analysis's results should that the H/B ratio of shear key is more effective than angle of shear key against shear strength and shear behavior, and it is more desirable to use a half of the H/B ratio of shear key. The specimen was made with same condition as AASHTO recommended. There model tests were performed under various form of shear key, number, arrangement reinforcement and condition using epoxy. As a result of the experiment, there is little difference(or there is no difference) between the case of using epoxy on shear connector and the unused case.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1486-1495
• /
• 2019

Dealing with the DC link fault poses a technical problem for an HVDC based on a modular multilevel converter. The fault suppressing mechanisms of several sub-module topologies with DC fault current blocking capacity are examined in this paper. An improved half-bridge sub-module topology with double direction control switch is also designed to address the additional power consumption problem, and a sub-module topology called hybrid double direction blocking sub module (HDDBSM) is proposed. The DC fault suppression characteristics and sub-module capacitor voltage balance problem is also analyzed, and a self-startup method is designed according to the number of capacitors. The simulation model in PSCAD/EMTDC is built to verify the self-startup process and the DC link fault suppression features.

• 정보보호학회논문지
• /
• 제13권2호
• /
• pp.91-98
• /
• 2003

본 논문은 유한체의 상군(quotient group)에서 이산대수문제를 고려한 새로운 공개키 시스템을 제안한다 이 시스템은 기존의 공개키의 크기와 전송 테이터 양을 반으로 줄여 통신량의 부담을 줄일 뿐만 아니라 효율적인 승연산을 통해 계산비용을 줄일 수 있다. 특별히 DSA와 비교해서 같은 안전도를 갖는 이 시스템의 속도는 대략 50%정도 향상된다.

• 원예과학기술지
• /
• 제34권1호
• /
• pp.122-133
• /
• 2016

While ion beams are widely used in plant breeding, little is known about the sensitivity of Lavandula angustifolia (lavender) to ionizing radiation. To compare the biological effects of different types of ionizing radiation on the germination and survival rates of lavender, we exposed lavender seeds to gamma rays, 3 MeV electron beams, and 1.89 MeV proton ion beams. We observed that the seed germination rate decreased with increasing dosages of all three types of ionizing radiation. The malformation rate of lavender seedlings exposed to electron beams and gamma rays increased with increasing radiation dosage. By contrast, the effect of the accelerated proton beams on the malformation rate was negatively correlated with the dosage used. The survival rate of lavender seedlings exposed to the three types of ionizing radiation decreased in a dose-dependent manner. In addition, the survival rate of seedlings irradiated with proton and electron beams decreased more slowly than did that of seedlings irradiated with gamma rays. The half-lethal dose of gamma rays, electron beams, and proton beams was determined to be 48.1 Gy, 134.3 Gy, and 277.8 Gy, respectively, and the most suitable proton-ion energy for lavender seeds in terms of penetration depth was determined to be 5 MeV. These findings provide valuable information for the breeding of lavender by radiation mutation.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.942-952
• /
• 2017

Modular multilevel converters (MMCs) have been receiving extensive research interest in high/medium-voltage applications due to its modularity, scalability, reliability, high-voltage capability, and excellent harmonic performance. Submodule capacitors are usually rather bulky because they have to withstand fundamental frequency voltage fluctuations. To reduce the capacitance of these capacitors, this study proposes a modified MMC with an active power decoupling circuit within each submodule. The modified submodule contains an auxiliary half bridge, with its capacitor split in two. Also, the midpoints of the half bridge and the split capacitors are connected by an inductor. With this modified submodule, the fundamental frequency voltage fluctuation can be suppressed to a great extent. The second-order voltage fluctuation, which is the second most significant component in submodule voltage fluctuations, is removed by the proper control of the second-order circulating current. Consequently, the submodule capacitance is significantly reduced. The viability and effectiveness of the proposed new MMC are confirmed by the simulation and experimental results. The proposed MMC is best suited for medium-voltage applications where power density is given a high priority.