• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.171-175
• /
• 2010

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1998.10a
• /
• pp.764-767
• /
• 1998

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.468-474
• /
• 2010

In this paper, a VCHO(Voltage Controlled Harmonic Oscillator) for K-band application has been designed and implemented. The proposed oscillator has a structure of two hair-pin resonators placed on input and output of active device. Using in/out common frequency tuning structure, the VCHO yields some advantages of the enhanced fundamental frequency suppression characteristic as well as the improved output power of second harmonic. According to implementation and measurement results, it was shown that a VCHO provides an output power of -2.41 dBm, a fundamental frequency suppression of -21.84 dBc, and phase noise of -101.44 dBc/Hz at 100 kHz offset. In addition, as for the bias voltage from 0 V to -10 V for the varactor diode, output frequency range of 10.58 MHz is obtained with a power variation of ${\pm}0.19\;dB$ over its frequency range.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1150-1155
• /
• 2006

In this paper, the equivalent circuit of tapped-line that is applied in the band-pass filter is suggested and the value of an equivalent circuit is mathematically defined. An equivalent circuit of tapped-line is composed by open stub and transmission line that has negative electrical length, and the position of tapped-line and the value of resonator's length can be obtained by the impedance of resonator and the inverter. The new design method using equivalent circuit leads to very good agreement compared with theoretical value. The hair-pin band-pass filter using equivalent circuit of tapped-line shows the insertion loss of 1.1 dB and the return loss of 20 dB at the center frequency of 2 GHz.

• KSCI Review
• /
• v.15 no.1
• /
• pp.11-16
• /
• 2007

본 논문에서는 X-Band용 두 개의 발진기를 사용하여 중간결합을 통한 위상잡음 특성을 개선할 목적으로 중간동기결합 구조의 발진기를 제안하였다. 제안된 구조는 각각의 발진기는 Hai-Pin을 이용한 발진기로 설계를 하였으며, 두 발진기가 중간결합을 위해 갖는 위상차는 발진기들의 바이어스를 이용하여 조정을 한다. 제안된 구조의 수치계산을 통한 설계, 하드웨어 구현 및 실험을 통해 측정된 결과를 제시하였으며, 측정 결과로 위상잡음 특성이 약 100dBc/Hz 개선됨을 보였다.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.1
• /
• pp.99-116
• /
• 2008

This study reviewed pertinent literature and examined relics of manggon(a headband worn to hold a man's topknot hair in place), donggot(a topknot pin), and chigwan(a topknot cover). Before the modernized short hair style, wearing a gat was an important custom. Therefore, manggon, which was used to hold a man's hair in place under the gat, was considered an essential part of the man's official dress code. Donggot is a pin that held the topknot hair in place. It was a must have for a married man, like the binyeo, a lod-like hairpin, for a married woman. Unlike gwanja, it had nothing to do with official rank, but materials were of a variety of materials, including jade and gold. The structure of the donggot was studied in three parts-head, neck and body. Major forms for the head include the mushroom, bean and ball. Bullet and half-cut bullet forms were also found. Forms for the neck include straight-neck and curved-neck. A neck with a belt around a double chin was also found. Forms for the body include the tetrahedron, octahedron and cylinder. The most popular form for silver and white bronze donggot heads was the mushroom, followed by bean and pile forms. Chigwan is also called chipogwan, chichoal, choalgyesogwan, noingwan and sangtugwan. In poetry it was called chichoal, and it used to be called taegogwan in the past as well. Chigwan was so small that it managed to hold a topknot. According to confucian custom in the Joseon period, by wearing chigwan, men didn't display their bare topknot even when they didn't dress up. When they went out, they wore another official hat over the chigwan.

• Journal of Fashion Business
• /
• v.9 no.4
• /
• pp.59-78
• /
• 2005

This study aims to know the deferences of hair fashion feeling group in accordance with hair styling activities, general characteristics, life styles objecting to capital area university women students and aid to hair fashion design. So the results are as belows. 1. Frequency Analysis of Categories A. Hair fashion feeling - Natural, sexy, romantic pretty, sophisticate, ethnic are 90% in total hair fashion feeling variables in sequence of frequency, so it can be said these are in vogue. B. Hair styling activities - The objections visit the hair salon once 1-2months, spend about 42,000 won a month, perform cut & wave perm to sentimental reasens & hair style changes, determine the hair style well coordinated in her image and managed easily. In her home, they manage her hair style 12 minutes a day, spend 17,000 won to buy hair aids, do hair blow dry or pin or pony tail mainly in the morning, scarcely use the hair styling aids but if use, essence or wax mainly. And the degree of interest to hair style is high. C. General Characteristics - The objections's average age is 21.1, residence is seoul kangnam 23.3%, seoul kangbook 18.4%, other capital areas 58.4%, the degree of education is university students 94.9%, graduated student 5.1%, marriage is married 96%, unmarried 2.8%, family who live with is married are mainly man & woman and living with father & mother in low in man's, unmarried are mainly live alone & nuclear family, personal expenses a month is 300,000 won in average, income of home is 4,000,000 won a month. D. Life style - The objections are not in interest of physical exercises but if are, do yoga & health, like drama & comedies program, watch TV or meet friend in leisure time, like balad & dance music, fashion magazine, meet friend in cafe or college. 2. Relationship of hair fashion feeling & other variables Using the $x^2$-test, level p<0.05, Hair styling activities(frequency of hair salon coming in and out, ordinary time representing hair style, preferred hair styling aids, the amount of hair style interest), General Characteristics(age), Life style(leisure time) variables are meaningful.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.401-411
• /
• 2003

Tube expanding process is for combining a heat-sink plate with hair-pins (Cu-tube) through plastic deformation. The two parts, i. e. , heat-sink plate and hair-pins are they components of a heat-exchanger for an air conditioner. This paper presents the analysis and dynamic modeling of a high-speed tube expander which integrates transfer of parts, fixing of parts, and tube expanding into one process. The 3-dimensional modeling of all the parts for the tube-expander was constructed using CATIA$\circledR$. then the CATIA$\circledR$ models are transferred into visuaINastran$\circledR$ to execute the 3-dimensional animation for checking prescribed cycle-time. The technique presented in this paper has been shown to be effective as a priori tool for verifying the design of a high-speed tube expander.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.83-89
• /
• 2010

In this paper, we propose a new varactor coupled line structure and design the VCO using the proposed structure. The proposed coupled line structure removes the reflected signals from the varactor diode using an added $\lambda$/4 transmission line. The frequency synthesizers are designed using the PLL technique at Ku-band. The synthesizer using the proposed coupled structure has 38 MHz frequency tuning range and -97 dBc/Hz phase noise characteristic at 100 KHz offset frequency. The measured results show improved tuning range as well as the improved phase noise characteristics compared to the conventional designs.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.8
• /
• pp.42-48
• /
• 1993

Ar ions were implanted at 1 MeV into (100)Cz Si wafers with dose of 1 * 10$^{15}$ ions/cm$^{2}$. Damage induced by high energy implantation and its annealing behavior during rapid thermal annealing for 10sec at temperatures from 550 to 1100${\circ}C$ were investigated by crosssection transmission electron microscopy study. It can be clearly seen from the observation that the SPE(Solid Phase Epitaxy) regrowth of the buried amorphous layer induced by ion implantation proceeds from both upper and lower amorphous/crystalline (a/c) interfaces, and the activation energy for SPE from interfaces were both 1.43eV. Misfit dislocation where two interfaces met was formed and it coalesced into the hair pin dislocation in the upper regrown region. At the higher temperature after annealing out of the misfit dislocation, hair pin dislocations showed considerable drop in its bandwidth. However, they were not disappeared even at the temperature 1100${\circ}C$ with the end of range dislocation loops which were formed at the original lower a/c interface.