• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.377-385
• /
• 2011

This study was carried out to investigate quality characteristics of dry-cured hams in the domestic market. Two kinds of dry-cured hams were processed with pork leg (T1) and pork neck (T2). Five 24-month dry-cured legs (T1, 5.3-6.1 kg) and twenty 4-month dry-cured pork necks (T2, 1.5-1.9 kg) were used in this experiment. They were stored at $4^{\circ}C$ chilling room and quality characteristics were investigated. Moisture content, water activity, cholesterol content, CIE $L^*$, VBN, total plate counts and lactic acid bacteria of T1 were significantly higher (p<0.05) than those of T2, whereas fat content, ${NO_2}^-$, CIE $a^*$, TBARS and Warner-Bratzler shear force values of T2 were significantly higher (p<0.05) than those of T1. In fatty acid compositions, palmitoleic acid and stearic acid in T2 were significantly higher (p<0.05) than T1, however, oleic and linoleic acid in T2 was significantly lower (p<0.05) than T1. In free amino acids, the total content and individual content of asparagin, leucine and phenylalanine in T1 were higher than those of T2 (p<0.05). The aroma score of T2 was higher than that of T1 in sensory evaluation (p<0.05). In conclusion, two kinds of dry-cured hams were different in their final characteristics and could enhance the consumer's appeal of pork meat in Korean market.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.333-339
• /
• 2011

The present study was performed to investigate the effects of pre- and post-weaning feeding programs on growth of pigs. A total of 24 litters (avg. 10.6 piglets/litter) born from multiparous (Yorkshire ${\times}$ Landrace) dams ${\times}$ Duroc sires were provided with neither creep feed (CF) nor milk replacer ("CON"), 200 gm CF/litter/d from the 15th day of lactation ("MIN"), or CF and milk replacer ad libitum for 7 h during the daytime from the 7th day ("MAX") through weaning at d 21 of age. Sixty-eight weanling pigs selected randomly from each of CON and MIN were provided with phases 1, 2 and 3 nursery diets for 7, 14, and 13 days, respectively, in two pens; an equal number of piglets from MAX received the same diets for 6, 10, and 18 days, respectively. Subsequently, all pigs were fed grower 1 and 2 diets sequentially up to d 95 and 135, respectively. The entire pre- and post-weaning feeding trial was repeated three times under a split-plot design of experiment. Initial and final weights and ADG of the suckling pigs did not differ between MAX/MIN and CON. However, final wt of MAX adjusted for initial wt, which was 0.17-kg less in MAX than in CON, was greater than that of CON by 0.31kg, whereas the difference between MIN and CON in final wt barely changed after the adjustment. Growth of the animals during the nursery and growing phases was not affected by the feeding program, whereas d 55 and 135 BW, as well as d 6 BW, were highly correlated with weaning weight (r=0.81, 0.57, and 0.76; P<0.001, <0.05, and <0.001, respectively). In conclusion, results suggest that provision of creep feed and milk replacer from early lactation may be effective for increasing weight gain of light piglets, but that limited provision of creep feed during late lactation or extension of the duration of phases 1 and 2 vs. 3 nursery diets for several days is unlikely to influence the growth of pigs during the corresponding and subsequent periods.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.125-130
• /
• 2009

The aim of this study was to investigate whether differences in the distribution of soil invertebrates among different vegetation types (forest, reservoir, and crop land types) in rural area. A total of 18 orders and 137 species were collected by pitfall traps. Species numbers were the lowest (33 species) at the Chamaecyparis obtusa plantation (St. 6). On the forest sites, the individual number of Hymenoptera was the most abundant, and Acari and Coleoptera was the relatively more abundant than the other sites. On the reservoir sites (Salix chaenomeloides community), the individual number of Collembola was the most abundant, and Diptera was the relatively more abundant than the other sites. On the crop land sites, the individual numbers of Collembola, Hymenoptera, and Araneae were the relatively more abundant than the other orders. The density of Araneae was higher in the reservoir and crop land sites than in the forest sites. From a point of view of biodiversity, although the diversity index(H') was the highest in the mixed broad-leaved forest type (St. 2) with Quercus serrata and Q. acutissima, and the lowest in the upland levee of crop land(St. 11), there was no significant difference among the habitat or vegetation types. According to the community analysis, the soil invertebrates could be divided into 4 groups, the mixed broad-leaved forest type (A group), the plantation or pure forest type (B group), the reservoir type (C group), and the crop land type (D group).

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.158-164
• /
• 2009

Biosorption uses adsorbents derived from non-living biomass and removes toxic metals from industrial wastewater. The objective of this research was to evaluate the potential of low cost biosorbents to remove heavy metal ions (Cd, Cu, Pb and Zn) from aqueous solutions using chemically modified rice husk and saw dust (Pseudotsuga menziesi, Quercus, Populus). Batch-type adsorption experiments were carried out using rice husk and saw dust treated with NaOH and/or tartaric acid in artificial wastewater 100 mg metal/L). The experimental results showed that the adsorption specificity of each biosorbent was Pb > Cu > Cd > Zn irrespective of the types of biosorbents. The adsorption capacity of Pb and Cu onto NaOH-treated sawdust was increased 2${\sim}$3 times compared to the untreated one. In addition, the tartaric acid treatment increased the adsorption capacity of rice husk for Zn and Cd approximately 5${\sim}$10 fold compared to the untreated one. Surface conditions and changes in functional groups by chemical modification of each biosorbent were confirmed by SEM and FT-IR. Overall, the results show that chemical modification increases the metal removal capacity of rice bran and sawdust.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.177-182
• /
• 2006

This study was conducted to investigate the effects of melengesterol acetate (MGA) and $PGF_{2{\alpha}}$ administrations on serum progesterone level, synchrony of estrus and conception rates in Han-woo. Firstly, ten heifers and one freematin were fed 0.5 mg MGA/day for 14 days in a grain carrier, and after 19 days of MGA feeding, a single injection of 25 mg $PGF_{2{\alpha}}$ were treated. Blood samples were collected to evaluate serum progesterone concentrations from the start of feeding of MGA until the end of feeding and subsequent estrous detection and artificial insemination (AI) at 3 days intervals, and on days of $PGF_{2{\alpha}}$ injection, estrous detection, AI, and 15th and 60th days after AI. The level of progesterone in the blood began to increase from 7 days after MGA feeding, and 9 days after feeding it became 5.4 ng/ml and maintained that level thereafter. On the 33th day when the $PGF_{2{\alpha}}$ was injected, it reached the peak level of 7.6 ng/ml. However, 2-3 days after $PGF_{2{\alpha}}$ injection, it dropped to 1.4 ng/ml drastically (p<0.05). Secondly, one hundred and ninety four Hanwoo heifers or cows were divided into two groups to compare estrous induction and conception rates: the one treated with MGA and $PGF_{2{\alpha}}$, (n=104) and the other with $PGF_{2{\alpha}}$ treatment (two injections at 11 days interval, n=90). The heifers or cows treated with MGA and $PGF_{2{\alpha}}$ were identical to those used as above. The percentages of heifers or cows showed estrus were higher in the $MGA+PGF_{2{\alpha}}$ treatment (91.3%) than in the $PGF_{2{\alpha}}$ treatment (72.2%, p<0.05). Conception rates were also higher in the $MGA+PGF_{2{\alpha}}$ treatment (94.2%) than in the $PGF_{2{\alpha}}$ treatment (88.9%, p<0.05). The results of this experiment indicate that estrus synchronization using $MGA+PGF_{2{\alpha}}$ is more effective than that using $PGF_{2{\alpha}}$ (two injections) in Hanwoo.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.241-250
• /
• 1999

A field plot experiment was carried out on mixed pasture from October 1995 to October 1997 to examine the effect of weed control as affected by the difference of mixed pasture species, planning with spilt plot design which main plots of 2 treatments (companion crop Italian ryegrass Lolium multiflorum and Kentucky bluegrass Poa pratensis) are divided into subplots of 4 treatments (T1: single companion crop, T2: Tall fescue Festuca arundinasea + Orchardgrass Dactylis glomerata + Ladino clover Trifolium repens, T3 : Perennial ryegrass Lolium perenne + orchardgrass + ladino clover, T4 : orchardgrass + ladino clover). Average 2 year-dry matter yields of companion crops as whole plots, Italian ryegrass and Kentucky bluegrass, were 15,437kg/ha and 14,629kg/ha, respectively and those of T1, T2, T3 and T4 as sub plots were 14,815, 15,407, 14,629 and 15,187kg/ha respectively without statistical1y significant difference(P>0.05). Though there was no significant difference between the dry matter yields of Italian ryegrass and Kentucky bluegrass, as whole plots, at 1st harvest of second year, dry matter yields of T3 and T4, as 4,591kg/ha and 4,816kg/ha respectively, were higher than those of T1, 3,376kg/ha(P<0.05), significantly. There was a significant difference among 2nd year-average DM yields of sub plots(P<0.05), showing highest with T4 15,131kg/ha and least with T1 13,085kg/ha and T3 13,269kg/ha. Italian ryegrass, as the companion crop, was better for the control of weeds in the early spring than Kentucky bluegrass, but reached to the similar botanical composition level with Kentucky bluegrass after summer with rapid decrease of Italian ryegrass. Percentage of Kentucky bluegrass in botanical composition increased slowly, but did'nt become an important factor for the control of weeds at the end of this experiment. Using orchardgrass in mixed pasture such as T2, T3 and T4 made weeds more decreased in mixed pasture than one in single conpanion crop. There was no difference among treatments of whole or sub plots in crude protein contents of pasture taken in this study. Contents of NDF and ADF of companion crop. Italian ryegrass plots harvested in October 1997 were hither than those of Kentucky bluegrass plots(P<0.05). ADF contents of Kentucky blue grass-plots taken in July 1997 has shown to be high significantly as compared to those of Italian ryegrass plots(P<0.01). The results of this study support that the companion crop Italian ryegrass was good for weed controls only in spring of 1st year after sowing and orchardgrass in mixed pastures played good roles for increase of dry matter yield and weed control.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.4
• /
• pp.348-354
• /
• 2011

Composite resin has been widely used for eroded enamel. But, as there have been many reports about the differences in physicochemical characteristics of eroded enamel compared with sound enamel, an additional effort was thought necessary to obtain the optimal bond strength. As a possible answer, we came to think about the application of infiltrant resin which is known to have an excellent penetration capacity into enamel. This study was performed for the purpose of comparing the bond strength of composite restoration with or without infiltrant resin under adhesives on the artificially eroded enamel. 60 extracted sound maxillary primary incisors were selected and divided into group 1, 2, 3 according to the number of artificial erosion cycling for 5 minute duration in 1% citric acid of pH 3.2 at $37^{\circ}C$. And the labial surfaces were divided into 3 areas; group A, only resin adhesive was used, group I, only infiltrant resin, group IA, infiltrant resin followed by resin adhesive. Afterwards, every specimen was restored with composite resin. Microtensile bond strength was measured and failure modes were observed. The obtained results were as follows: 1. In comparing the bond strength by the degree of enamel erosion, it was revealed the highest bond strength in group 1, followed by group 2 and 3, showing the lowest bond strength in most eroded group(p<0.05). 2. In comparing the bond strength by surface treatment methods, group IA and I showed higher value than group A(p<0.05), with unsignificant difference between group I and IA(p>0.05). 3. In observation of failure mode, it was shown higher frequency of cohesive failure in order of 1-2-3 and IA-I-A. Conclusively, it was shown decreasing tendency of bond strength as the enamel is more eroded, and infiltrant resin was thought helpful to replace or add to the resin adhesive for optimal bonding with eroded enamel.

• Journal of dental hygiene science
• /
• v.17 no.6
• /
• pp.495-500
• /
• 2017

Hippophae rhamnoides L. (sea buckthorn) is a shrub wood that belongs to the bamboo tree family, and is rich in vitamin C, D, and E; it is referred to as a vitamin tree. It is mainly grown in the high mountains of Europe and Central Asia, and has been widely used in China and Russia as natural medicine. Recent studies have shown that it is effective in the treatment of cancer, liver diseases, cardiovascular diseases, and gastrointestinal diseases. However, results of studies on its effect on the regulation of pain are insufficient. In this study, we investigated the effect of sea buckthorn on the development and control of pain in two facial areas. The experimental animals included 7- to 8-week-old Sprague-Dawley rats (240~260 g). Formalin (5%), which is known as an inflammation inducer, was injected into the vibrissa pad or temporomandibular joints to induce orofacial acute pain. Rubbing or scraping of the region injected with formalin was regarded as a pain index, and the behavioral response was observed for 45 minutes after the injection. Sea buckthorn extract diluted to 150, 300 mg/kg (in 1 ml of distilled water) was orally administered 30 minutes prior to the acute pain. The facial pain behavior was effectively reduced in the 300 mg/kg group when compared to the control group (vehicle). Likewise, in an experiment in which formalin was injected into the temporomandibular joints, effective pain alleviation was confirmed at the same drug concentration. These results suggest that sea buckthorn extract may be useful in the development of therapeutic agents for acute inflammatory pain in the orofacial area and for controlling temporomandibular joint pain.

• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.