• Progress in Superconductivity and Cryogenics
• /
• v.9 no.2
• /
• pp.7-10
• /
• 2007

Persistent mode HTS pancake coil has been fabricated using a coated conductor by a "wind-and-flip" method. A coated conductor with the length of 1.2 meters was divided at the center along the length. The sliced coated conductor was wound on a pair of bobbins with a diameter of around 4 cm and two pancake coils connected superconductively without a resistive joint were prepared. By flipping one of the pancake coils, the magnetic field generated by each coil is to be aligned to the same direction and generate meaningful magnetic field while the magnetic fields of two spit coils are canceled without flipping. Permanent current was induced by flowing current to the coil immersed in liquid nitrogen pool using a power supply. A magnetic field of 48.8 Gauss was generated when 20 A of current was flowing in the pancake coils. The "Wind and flip" method can be applied for the fabrication of a long solenoid magnet by winding a sliced coated conductor on a cylindrical bobbin. It is also introduced that the construction of multiple sets of pancake (or solenoid) coils is possible by a "wind-and-flip" method using a wide coated conductor.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.1
• /
• pp.28-31
• /
• 2010

A magnetic field calculation method for toroidal type winding which has circular section was developed. At first, the equation for magnetic field by single filament coil was extended using numerical integration to estimate the entire interesting region of solenoid, especially winding region itself. And then, the magnetic field by toroidal arrangement of solenoids was computed with a coordinate transformation of vector fields. The superconducting magnet with toroidal arrangement can be made up of several tens of solenoid type double pancake windings for some applications such as superconducting magnetic energy storage system(SMES). In this system, the field calculation on the high-Tc superconducting(HTS) tape itself is very important because the entire system can be reached to a fault by magnetic stress of conductor or the critical current of superconducting tape can be dramatically reduced under its self field condition. To make matters worse, 3-dimensional analysis is indispensable for this type of magnet and the most of commercial programs with finite element method can be taken too much time for analysis and design. In this paper, a magnetic field calculation method for toroidal type winding with circular section was induced.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1159_1160
• /
• 2009

This paper presents the numerical simulation results on the supercodnucting electrodynamic suspension (EDS) simulator according to the variation of the ground conductor. The levitation force of the EDS system is formed by the reaction between the moving magnet and the fixed ground conductor. The possible way to simulate the EDS system were simulated in this paper by using finite element method (FEM). The static type simulator which consists of the fixed magnet, the fixed ground conductor and the ac current supply system. To verify the characteristics of high speed EDS system with the moving type simulator heavy, large and fast moving ground conductor is needed. The static type simulator can get the characteristics of the high speed EDS system by applying equivalent ac current to velocity, therefore it does not need large moving part. The static type EDS simulator, which can consist of an HTS magnet, the fixed ground conductor(s), an AC power supply and the measuring devices, also test the effect of the shape of the ground conductor easily. The plate type ground conductor made stronger levitation force than ring type ground conductor. Although the outer diameter 335 mm ring type ground conductor (Ring3) was larger than the outer diameter 235 mm ground conductor (Ring2), the levitation force by Ring2 was stronger than that by Ring3. From the calculation results on this paper, the consideration of the magnetic flux distribution according to the levitation height should be included in the process of the ground conductor design.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1117-1118
• /
• 2011

NMR이나 MRI와 같은 고자장을 필요로 하는 마그넷은 높은 운전전류를 갖는 초전도 선재를 이용하여 제작된다. 이때 마그넷은 여러 코일을 겹쳐서 제작하는 것이 일반적이고, 크게 내측마그넷과 외측 마그넷으로 구분할 수 있다. 본 논문에서는 15T 외측마그넷 안에서 동작하는 5T급 내측마그넷의 설계 과정을 나타내었다. 내측마그넷은 2세대 고온초전도 선재를 이용하여 설계되고, 4.2K의 액체헬륨 안에서 동작한다. 마그넷의 임계전류는 초전도 선재의 $I_c$-B 특성을 고려하여 산정하였고, 임계전류를 바탕으로 운전전류를 결정하였다. 내측마그넷의 발생자장이 5T를 만족하는 운전전류와 마그넷의 형상을 계산을 통하여 제시하였다.

• Progress in Superconductivity and Cryogenics
• /
• v.3 no.2
• /
• pp.1-4
• /
• 2001

For the practical use of a superconducting wire to magnet application, it is important to assess the Young modulus and other mechanical properties of HTS tapes. In order to establish a test method of mechanical properties for oxide composite superconductors. tensile tests of Bi-2223 multi- filamentary tapes were carried out at room temperature, as an activity of the International round robin test proposed by the committee of VAMAS/TWA 16-Subrgroup. The tapes consisting of mutli-filamentary showed a three stage tensile behavior. At the initial stage of the stress-streain curve. The elastic deformation existed in a quite nattrow strain region. But the plastic deformation was observed in a wide strain region due to the platic flow of the Ag alloy matrix. The results of RRT were also reported and discussed.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.1
• /
• pp.14-18
• /
• 2016

Organic compounds have a problem that the separation of structural isomer in the preparation process requires high energy consumption. This study proposes a new separation method of structural isomer using Magneto- Archimedes method. Firstly, the levitation height of 1, 6-DDA and 1, 10-DDA was respectively calculated by simulation of the forces acting on the particles under magnetic field, and it was indicated that they could be separated by the difference of levitation height. To confirm the phenomenon experimentally, white powders of 1, 6-DDA and 1, 10-DDA were formed into pellets, and were soaked in manganese chloride solution. Then the solution was put on the center of the cryostat of HTS bulk magnet (maximum magnetic flux density is 3T). As a result, it was confirmed that the separation of structural isomer by difference of levitation height could be possible.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.631-632
• /
• 2008

본 논문은 2.5MJ의 저장용량을 가지는 SMES 용 고온초전도 마그넷의 설계에 관한 연구 결과이다. 선재는 2세대 고온초전도 선재인 YBCO CC를 2단으로 적층하여 사용하였다. 운전전류는 전도냉각 방식을 사용하는 것을 가정해 22K의 운전온도에서 선재의 임계전류를 고려하여 600A 이상으로 결정하였다. 마그넷의 형상은 싱글 솔레노이드와 토로이드 형태로 각각 설계하였고 싱글 솔레노이드는 더블 팬케이크 모듈코일을 적층하여 구성 토로이드는 싱글팬케이크 모듈코일을 배열하여 모듈러 토로이드로 구성하였다. 각 형상별 설계결과를 통해 저장에너지와 선재사용량 그리고 누설자장의 크기를 각각 비교하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.673-674
• /
• 2008

팬케이크 형태로 권선된 고온초전도 마그넷의 경우 모든 팬케이크 권선을 직렬로 연결하여 단일전원으로 여자할 경우 가장 큰 수직자장을 받는 팬케이크 권선에 의해 모든 팬케이크 권선의 임계전류가 제한된다. 본 논문에서는 별도전원으로 여자되는 YBCO 고온초전도 마그넷의 특성을 계산하여 단일전원으로 여자되는 경우와 비교하였다. 계산 결과 별도전원으로 여자되는 YBCO 고온초전도 마그넷의 모든 팬케이크 권선들은 각각의 임계전류까지 통전되었으며 중심자장의 세기가 단일전원으로 여자되는 마그넷보다 증가함을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.697-698
• /
• 2006

고온 초전도 선재는 자장의 세기, 방향 그리고 온도에 따라 임계전류가 달라지는 특성이 있다. 임계전류가 달라지는 특성은 초전도 선재를 사용하는 초전도 기기에 매우 영향을 미치게 된다. 자장의 세기, 인가 방향이 선재의 임계전류에 비치는 영향에 대하여 알아보기 위하여, prototype magnet을 제작하고, 선재에 전압 tap을 부착하여 실험을 하였다. 자장의 세기와 고온 초전도 선재가 받는 자장의 방향을 변화시켜가며 실험을 하였다. 또한, 주파수에 대한 선재의 영향을 알아보기 위하여, 주파수 변화에 따른 선재의 임계전류 변화도 측정을 하였다. 본 논문은 고온 초전도 선재를 이용하여 제작하게 되는 고온 초전도 기기 설계의 기초자료로 활용될 수 있을 것이다.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.966-968
• /
• 2000

비등방성 고온 초전도 테이프는 자장의 세기뿐만 아니라 방향에 따라서도 임계 전류 값이 영향을 받는다. 이러한 비등방성 고온 초전도 테이프로 권선된 솔레노이드 마그네트의 임계 전류 특성 및 임계 전류를 결정짓는 위치를 알아내기 위해, 솔레노이드 모델의 자장 분포 및 수직 자장 성분과 평행 자장 성분을 구하고 임계 전류는 비선형 방정식을 수치적인 방법을 이용하여 예측해보았다.