• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.597-598
• /
• 2006

This paper describes a development of a new $1.4{\times}1.1$ and $2.0{\times}1.4mm$ RF SAW filters made by PCB substrate instead of HTCC package, and this technology can reduce the cost of materials down to 40%. We have investigated the multi-layered PCB substrate structures and raw materials to find out the optimal flip-bonding condition between the $LiTaO_3$ wafer and PCB substrates. Also the optimal materials and processing conditions of epoxy laminating film were found out through the experiments which can reduce the bending moment caused by the difference of the thermal expansion between the PCB substrate and laminating film. The new PCB SAW filter shows good electrical and reliability performances with respect to the present SAW filters.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1161-1169
• /
• 2008

The removals of TCE and PCE vapor with or without a supply of toluene as a primary substrate were compared in a biofiltration process, and the variations of microbial communities associated with the removal were also investigated. As a result of investigations on the removals of TCE/PCE in a biofilter B within which TCE/PCE-acclimated sludge was attached on the surface of media without a supply of primary substrate, and those in another biofilter A where toluene-acclimated sludge was attached with a supply of toluene as a primary substrate, followings were found: (i) parts of microbes responsible to the decomposition of toluene vapor participate in the removal of chlorinated VOCs such as TCE and PCE, and (ii) effective biological removals of TCE and PCE vapor do not necessarily need cometabolism. Sequencing of 16S rDNA obtained from the band profile of DGGE (Denaturating Gradient Gel Electrophoresis), it was confirmed that: (i) uncultured alpha proteobacterium, uncultured Desulfitobacterium, uncultured Rhodobacteraceae bacterium, Cupriavidus necator, and Pseudomonas putida were found to be toluene-decomposing microbes, (ii) alpha proteobacterium HTCC396 is a TCE-removing microbe, (iii) Desulfitobacterium sp. is a PCE-decomposing microbe, and (iv) particularly, uncultured Desulfitobacterium sp. is probably a microbe decomposable not only toluene but also various chlorinated VOC vapor including TCE and PCE.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.25-35
• /
• 1999

LTCC (Low Temperature Cofired Ceramic) or LTCC-M (Low Temperature Cofired ceramic on Metal) technology is one of MCM-C (Multichip Module on Ceramic) technologies and becomes to be widely used in consumer, RF and automotive electronics. As green sheets for LTCC are cofired below $1000^{\circ}C$ in comparison with those for HTCC (High Temperature Cofired Ceramic), high conductivity metal traces such as gold, silver and copper can be used. The dimensional stability in LTCC-M technology enables embedded passives to be integrated inside modules, which enhances the electrical performance and increases the reliability of the modules. Coefficient of thermal expansion and dielectric constant can be controlled by changing composition and heating profile for cofiring. In this technical review, LTCC and LTCC-M technologies are introduced and advantages of those technologies are explained.

• Rapid Communication in Photoscience
• /
• v.2 no.2
• /
• pp.60-63
• /
• 2013

Rhodopsins belong to a family of membrane-embedded photoactive retinylidene proteins. One opsin gene was isolated from ${\beta}$-proteobacterium (IMCC9480) which had been collected at the North Pole. It is very similar to Xanthorhodopin (XR) of HTCC2181. In this study, we carried out basic characterization of the rhodopsin. It has ${\lambda}max$ of 536, 554, and 546 nm at pH 4.0, 7.0, and 10.0, respectively. Since the pKa of its proton acceptor is around 6.27, we measured its proton pumping activity and photocycling rate at pH 8.0. It has a typical proton acceptor (D99) and donor (E110) which mediate proton translocation from intracellular to extracellular region when deduced from the sequence alignments. On the basis of in vitro proton pumping activity, it was proposed to have fast photocycling rate with M and O intermediates, indicating that it is a typical ion-pumping rhodopsin. Since the XR has not yet been expressed in any other heterologous expression system, we tried to get much more information about the XR through the XR-homologue rhodopsin.