• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.5-14
• /
• 2023

In this study, LiDAR-reflective black hollow-structured silica/titania(B-HST) materials are successfully synthesized by employing the NaBH₄ reduction and etching method on silica/titania core/shell(STCS) materials, which also effectively enhance near-infrared(NIR) reflectance. Moreover, core-etched supernatant solutions are collected and recycled for the synthesis of extracted silica(e-SiO₂) process, which successfully applies as filler materials for semiconductor epoxy molding compound(EMC). In detail, B-HST materials, fabricated by the sequential experimental steps of sol-gel, reduction, and sonication-mediated etching method, manifest blackness(L^*) of 13.2 similar to black paint and excellent NIR reflectance(31.1%). Consequently, B-HST materials are successfully prepared as LiDAR-reflective black materials. Additionally, core-etched supernatant solution with silanol precursors are employed for synthesis of homogeneous silica filler materials via sol-gel method. As-synthesized silica fillers are incorporated with epoxy resin and carbon black for the preparation of semiconductor EMC. Experimentally synthesized EMC exhibits comparable mechanical-chemical properties to commercial EMC. Conclusively, this study successfully proposes designing procedure and practical experimental method for simultaneously synthesizing the NIR-reflective black materials for self-driving vehicles and EMC materials for semiconductors, which are materials suitable for the industrial 4.0 era, and presented their applicability in future industries.

• 기계와재료
• /
• v.23 no.3
• /
• pp.164-172
• /
• 2011

기계-유압식 무단변속기인 DMT는 농촌의 고령화의 추세에 맞물려 중 대형 트랙터의 핵심기술로 부각되고 있다. DMT는 기계동력과 유압동력인 두 개의 전달 구조를 조합하고 서로의 단점을 보완함으로써 기동력이 우수하고, 변속충격이 거의 없고, 전달효율이 향상되고 있다. 트랙터용 DMT는 유압동력을 전달하는 HST, 기계동력을 분배 뽀는 합성하는 유성기어 장치, 전진과 후진을 선택하는 전 후진 클러치, 출력축을 정지하는 브레이크 등으로 구성되어 있다. 본 연구에서는 DMT의 핵심기술인 HST와 유성기어장치에 대한 내부구조 및 동력전달을 해석하고 시제품의 실험결과를 제시하여 국내에서 진행되고 있는 DMT의 연구현황을 소개하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1188-1193
• /
• 1993

For the HST(Hydrostatic Transmission) consisted of a variable displacement axial piston pump and motor, a speed controller with efficiencies considered is proposed. To consider a efficiency in speed control, the displacements of pump and motor which maximize a steady state efficiencies with a various load torque are calculated through computer simulation and these results are reflected to speed controller which has PI control structure with cross over control scheme. It is shown through computer simulation that the proposed controller gives better steady state efficiencies compared with the conventional controller and good transient responses.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.222-227
• /
• 1998

The paper proposes a new method for measuring the flow ripple generated by an axial piston pump and motor in a hydrostatic transmission. The method is based on dynamic characteristics between pressure and flow ripple in the pipeline. Also, the self-checking functions develop for the evaluation of accuracy and dynamic response of estimated results by the method proposed here. The experiment carry out open circuit type hydrostatic transmission. By using the self-checking functions, the validity of the method is investigated by comparison with the measured and estimated flow and pressure ripples, and good agreement is achieved.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.948-953
• /
• 2002

As the delay of the Kyungbu High Speed Railroad, HST should use conventional line through Daegoo to Pusan until the new railroad build. High speed railroad noise is one of the main causes of environmental impact. Whenever HST on conventional railroad line is planned or a housing project near an existing railroad is proposed, an estimate of the relevant noise levels is usually required. For this, it is necessary to quantify those parameters that affect the railroad noise. This paper deals with an estimation of high speed railroad noise on conventional line.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.452-457
• /
• 2002

High speed railroad noise is one of the main causes of environmental impact. An estimate of the relevant noise levels is usually required in order to evaluate the noise barrier and the anti-noise trailer. This paper introduce the test procedure and the estimate for HST noise. The aim of this is to measure, by means of a test, the level of acoustic pressure present during the passing of a KTX(Korea Train Express), in order to satisfy the contractual requirements and the noise criteria. A number of measurements are carried out in order to estimate noise impact by HST along test track.

• Korean Journal of Agricultural Science
• /
• v.15 no.1
• /
• pp.1-7
• /
• 1988

Out of 24 isolates of Alternaria collected from pear leaves, only 7 isolates from cv. Nijiseiki leaves were specifically pathogenic to susceptible pear cultivar(Nijiseiki). Other isolates from cv. Chojuro, Oksankichi and Sinko did not show any pathogenicity to pear leaves. Pathogenic isolates of Alternaria kikuchiana produced host-specific toxin (AK-toxin) in liquid culture which caused veinal necrosis only on susceptible pear leaves, while nonpathogenic isolates did not produce this toxin. Varietal susceptibility among pear cultivars to the pathogen was investigated by evaluating HST (AK-toxin) sensitivity of pear leaves, as a substitute for spore inoculation. AK-toxin which the fungus produces was toxic to pear cultivars susceptible to the pathogen such as Isipsegi and Sinsu, but was harmless to resistant pear cultivars such as Chojuro, Oksankichi, Niitaka etc. Changes in disease susceptibility and toxin sensitivity of pear leaves with aging was investigated. Disease susceptibility and toxin sensitivity in cv. Sinsu leaves appeared to vary with leaf aging; the young leaves were visibly susceptible, but older leaves (more than 2 week old leaves) became resistant.

• Wind and Structures
• /
• v.30 no.4
• /
• pp.325-338
• /
• 2020

In this paper, the improvement of the anti-snow performance of a high-speed train (HST) is studied using the unsteady Reynolds-Averaged Navier-Stokes simulations (URANS) coupled with the Discrete Phase Model (DPM). The influences of the proposed flow control scheme on the velocity distribution of the airflow and snow particles, snow concentration level and accumulated mass in the bogie cavities are analyzed. The results show that the front anti-snow structures can effectively deflect downward the airflow and snow particles at the entrance of the cavities and alleviate the strong impact on the bogie bottom, thereby decrease the local accumulated snow. The rotational rear plates with the deflecting angle of 45° are found to present well deflecting effect on the particles' trajectories and force more snow to flow out of the cavities, and thus significantly reduce the accretion distribution on the bogie top. Furthermore, running speeds of HST are shown to have a great effect on the snow-resistance capability of the flow control scheme. The proposed flow control scheme achieves more snow reduction for HST at higher train's running speed in the cold regions.

• Journal of Biosystems Engineering
• /
• v.29 no.5 s.106
• /
• pp.395-406
• /
• 2004

Most of tractors in the world have manual gear transmission, and some of small tractors have hydrostatic trans-mission(HST). Since the HST is expensive and has low power efficiency, it is being used for only small garden tractors. The continuously variable transmission(CVT) is an alternative to the HST or power-shift gear transmissions. The driver of the CVT tractor doesn't have to operate a shift lever since the CVT controller automatically controls the speed of tractor. Thus, it is much easier to operate the CVT tractor. For the easy and stable control of the CVT tractor, an appropriate control algorithm should be developed and the dynamic modeling should be carried out before making the prototype of CVT controller. This study was conducted to develop a simulation model of the CVT control system needed to develop a PID control algorithm. The simulation model consisted of variator dynamics, hydraulic system and control computer. And the simulation model was verified by experiment. The results obtained in this study can be utilized in the design of CVT tractors for practical use, but a lot of field tests and improvement of softwares would be necessary.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.49.1-49.1
• /
• 2012

Recently it is found that the globular clusters are not only bound in their host galaxies, but also are wandering between galaxies in Virgo and Coma clusters. The cluster-wide distribution of these intracluster globular clusters (IGCs) suggests that IGCs are an important probe to understand hierarchical structure formation. We present a survey of IGCs in Virgo cluster using HST archive images for four HST/ACS fields located from about 9 arcmin to 40 acrmin from the cluster center. We find ten new IGCs and confirm four previously known IGCs. The number density of IGCs decreases as the distance from the cluster center increases. We derive integrated photometry of IGCs. We also obtain photometry of resolved stars in the outer region of each cluster. These IGCs are fainter than $M_V{\approx}-9.5$ and mostly blue in (V-I) color. showing that they are mostly metal poor. The locations of red giant branch stars of IGCs in color-magnitude diagrams also show that they are meal-poor. We discuss the implications of these results.