• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.383-387
• /
• 2011

The levels of migration of 1-hexene and 1-octene residues in PE (polyethylene) products were analyzed by Headspace gaschromatography (HSGC). A total of 21 samples were including lap, polyglove, zipper bag and ect. The samples were eluted with distilled water, 4% acetic acid, 20% ethanol and n-heptan. The limit of detection (LOD) was 0.06 mg/L ~ 0.30 mg/L and limit of quantitation (LOQ) was 0.21 mg/L ~ 1.01 mg/L, respectively. But because of the high volatile, n-heptan elution was not detected 1-hexene and 1-octene standard. 1-hexene and 1-octene were not detected in the sample which eluted with simulant at $60^{\circ}C$, 30min. Microwave for 1 minute also treated sample and direct heated at $100^{\circ}C$ without simulant were not detected.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1177-1179
• /
• 1996

A static headspace gas chromatographic (HSGC) technique was used to quantify toluene and other solvents (methanol, isopropyl alcohol, methyl ethyl ketone and ethyl acetate) in food packaging films. Comparison of retention times and coefficient variations for standard solvents showed consistent retention time and good reproducibility. Therefore, this method using static HSGC proved to be superior in rapidity and reproducibility, and is thought to be adaptable to analysis of a large number of samples. The methanol content was $N.D.\;(not\;detected){\sim}0.939\;mg/m^2$, toluene $N.D.{\sim}1.403\;mg/m^2$, melthyl ethyl ketone $N.D.{\sim}0.932\;mg/m^2$, total solvent content was $N.D.{\sim}2.433\;mg/m^2$.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.259-265
• /
• 2005

Binary isothermal vapor-liquid equilibrium(VLE) data were measured for water+n-methylformamide(NMF), benzene+NMF and toluene+NMF systems by using headspace gas chromatography(HSGC) at 353.15K. Additionally, the ternary liquid-liquid Equilibrium(LLE) data were determined by measuring of tie-line for the systems of NMF+benzene+n-heptane and NMF+toluene+n-heptane at 298.15 K. The measured isothermal binary VLE data have no azeotropes and were correlated well with $g^E$ model equations of Margules, van Laar, Wilson, NRTL and UNIQUAC. The experimental ternary tie line data were also correlated well with NRTL and UNIQUAC models. Besides their accuracy was analyzed by Hirata-Fujita and Maior-Swenson equations.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.56-61
• /
• 2011

Alkyl vinyl ethers such as methyl vinyl ether, propyl vinyl ether, isopropyl vinyl ether, butyl vinyl ether and isobutyl vinyl ether are usually used as industrial solvents and chemical intermediates in the chemical or pharmaceutical industry. Recently, they are popularly used as raw materials for polymer electrolyte membrane fuel cells and as cellulose dyeing assistants. However, very few investigations about process design and operation data were reported for alkyl vinyl ether compounds and there are no data for propyl vinyl ether(PVE) systems as far as we know. In this work, the isothermal VLE data are reported at 333.15 K for the ternary systems of {PVE + ethanol + benzene} by using headspace gas chromatography(HSGC) and these VLE data were correlated using Wilson, NRTL and UNIQUAC equations. The excess volumes($V^E$) and deviations in molar refractivity(${\Delta}R$) data are also reported for the sub binary systems {PVE + ethanol}, {ethanol + benzene} and {PVE + benzene} at 303.15 K. These data were correlated with Redlich-Kister equation. In addition, isoclines of $V^E$ and DR for ternary system {PVE + ethanol + benzene} were also calculated from Radojkovi equation.