• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.144-152
• /
• 2016

This paper focuses on the experimental study for investigating the performance for lap splice of hooked or headed reinforcement in beam with different depths. In the experiment, seven specimens, with its variables as the lap length of headed or hooked bar, the existence of stirrups, etc., was manufactured. Bending test was conducted. Lap strengths by test were compared with the theoretical model based on KCI2012. The result showed that the cracks at failure mode occurred along the axial direction to a headed bar. The initial stiffness and the stiffness after initial crack were similar for all specimens. For HS series specimens without stirrups, a 25% increase in lap length was increased 11.8~18.1% maximum strengths. For HH series specimens without stirrups, a increase in lap length did not affect the maximum strengths because of the pryout failure of headed bar. For HS series specimens, the theoretical lap strengths based on KCI2012 considering the B grade lap and the reduction factor for stirrup were evaluated. They are smaller than the test strengths and can ensure the safety in terms of strength capacity. For HH series specimens, the stirrups in the lap zone are needed to prevent the pryout behaviour of headed bar.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.77
• /
• pp.195-214
• /
• 2018

In order to analyze the current status of trade with Korea and FTA partner countries, the Trade Intensity Index and the Market Comparative Advantage index were calculated and analyzed using panel gravity model. In the case of trade, trade intensity index has been strengthened according to each FTA enforecement, and in some cases, trade inensity has been weakened. In the case of the comparative advantage index, there was a case in which the comparative advantage was strengthened or the comparative advantage was not significantly changed according to each Chapter of HS code. This means that the Korea's FTA enforcement effect has not directly affected the increase of the trade intensity and the increase of the market comparative advantage index. The panel gravity model using the trade intensity and the comparative advantage index as the dependent variable and the trade volume between the two countries as the dependent variable was analyzed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.110-115
• /
• 2005

This paper proposes the method to detect contours of a face, eyes and a mouth in a color image for making an avatar automatically. First, we use the HSI color model to exclude the effect of various light condition, and we find skin regions in an input image by using the skin color is defined on HS-plane. And then, we use deformable templates and Genetic Algorithm(GA) to detect contours of a face, eyes and a mouth. Deformable templates consist of B-spline curves and control point vectors. Those can represent various shape of a face, eyes and a mouth. And GA is very useful search procedure based on the mechanics of natural selection and natural genetics. Second, an avatar is created automatically by using contours and Fuzzy C-means clustering(FCM). FCM is used to reduce the number of face color As a result, we could create avatars like handmade caricatures which can represent the user's identity, differing from ones generated by the existing methods.

• Journal of Pharmacopuncture
• /
• v.25 no.3
• /
• pp.258-267
• /
• 2022

Objectives: Hypertrophic scars (HSs) are caused by abnormal wound healing. To date, no standard treatment has been made available for HSs. Scrophularia striata has been reported to accelerate wound healing and has the potential to prevent HS formation. In this study, we investigated the anti-scarring effects of S. striata extract (SSE) in a rabbit ear model of scarring. Methods: In this study, New Zealand white rabbit (weight: 2.3-2.5 kg) were used. In the prevention phase of the study, three test groups received 5%, 10%, and 15% ointments of SSE in the Eucerin base, the fourth group received Eucerin, and the fifth group received no treatment. The samples were obtained on day 35 after wounding. In the treatment phase of the study, the test groups received an intralesional injection of SSE (5%, 10%, and 15%), the fourth group received an intralesional injection of triamcinolone, the fifth group received a solvent (injection vehicle), and the sixth group received no treatment. To evaluate the anti-scarring effects of SSE, the scar elevation index (SEI), epidermis thickness index (ETI), collagen deposition, and MMP2 and MMP9 gene expression were evaluated. Results: A significant reduction in SEI, ETI, and collagen deposition was noted in animals treated with SSE compared with the control groups. In addition, topical SSE stimulated MMP2 and MMP9 gene expression. Conclusion: The findings of this study demonstrate the potential for SSE in the prevention and treatment of HS. SSE could be prepared as an appropriate formulation to treat wounds and prevent abnormal scarring.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.8
• /
• pp.85-94
• /
• 2012

Evaluation of the smear effect caused by mandrel penetration into soft ground for a vertical drain installation is very important to predict the consolidation time of soft ground improvement. 30 kinds of laboratory model tests considering in situ conditions were conducted to investigate the formation of a smear zone and the decrease of coefficient of permeability in the disturbed zone. Three types(C(clay):M(silt)=1:1, 0.5:0.5, and 0:1) of reconstituted samples were used for 3 dimensional smear zone test. An experimental study was performed focusing on length of mandrel penetration, mandrel shape and size, earth pressure, and ground condition(unit weight and grain size distributions). Laboratory test results show that the length of mandrel penetration is the most critical factor for the formation of smear zone. As a result, the ratio between diameter of the smear zone($d_s$) and that of mandrel($d_m$) at field using long mandrel becomes larger than conventional $d_s/d_m$. The ratio between $d_s$ and $d_m$ ranges from 1.89 and 2.48 with the sample at C:M=1:0. It was also found that the $d_s/d_m$ value with the round shape of the mandrel is smaller than that of diamond one. The value of $d_s/d_m$ decreased with larger mandrel size, lower unit weight, and higher earth pressure. However, higher silt content led to increase of $d_s/d_m$. The ratio between coefficient of horizontal permeability in the smear zone($k_{hs}$) and that of undisturbed zone($k_{ho}$) ranged from 0.70 to 0.85. The test results imply that factors and values affecting $k_{hs}/k_{ho}$ show similar tendency with $d_s/d_m$.

• Structural Engineering and Mechanics
• /
• v.11 no.3
• /
• pp.259-272
• /
• 2001

The impact behavior of a multigirder concrete bridge under single and multiple moving vehicles is studied based on correlated road surface characteristics. The bridge structure is modeled as grillage beam system. A 3D nonlinear vehicle model with eleven degrees of freedom is utilized according to the HS20-44 truck design loading in the American Association of State Highway and Transportation Officials (AASHTO) specifications. A triangle correlation model is introduced to generate four classes of longitudinal road surface roughness as multi-correlated random processes along deck transverse direction. On the basis of a correlation length of approximately half the bridge width, the upper limits of impact factors obtained under confidence level of 95 percent and side-by-side three-truck loading provide probability-based evidence for the evaluation of AASHTO specifications. The analytical results indicate that a better transverse correlation among road surface roughness generally leads to slightly higher impact factors. Suggestions are made for the routine maintenance of this type of highway bridges.

• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.353-363
• /
• 1994

The non-preiodic fluctuation of the engine torque appears to be the major source of the torsional vibration of the automotive driveline. The reduction of this torsional vibration hs become a significant problem along with the requirements of higher performance. The shuffle(tip-in, tip-out) is the transient vibration phenomenon of a vehicle which appears at the sudden change of an accelerator under traveling. By executing of an experiment and a simulation using a model, it has become possible to obtain the design parameter of a driveline for the torsional vibration. This paper presents an experimental and theoretical research on the transient vibration phenomenon of a vehicle which appears at the sudden change of an accelerator under traveling. A dynamic model for the automotive driveline was developed, and all parameters of the mmdel were evaluated with experimental data. The results are as follows: (1) The lower the gea ratio of the transmission is, the more the transient vibration phenomenon of a vehicle appears clearly. (2) The transient vibration phenomenon of a vehicle is affected by the design parmeter of the driveline.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.10
• /
• pp.604-614
• /
• 2005

Color segmentation takes great attentions since a color is an effective and robust visual cue for characterizing one object from other objects. Color segmentation is, however, suffered from color variation induced from irregular illumination changes. This paper proposes a reliable color modeling approach in HSI (Hue-Saturation-Intensity) rotor space considering intensity information by adopting B-spline curve fitting to make a mathematical model for statistical characteristics of a color with respect to brightness. It is based on the fact that color distribution of a single-colored object is not invariant with respect to brightness variations even in HS (Hue-Saturation) plane. The proposed approach is applied for the segmentation of human skin areas successfully under various illumination conditions.

• Korean Journal of Agricultural Science
• /
• v.38 no.4
• /
• pp.711-716
• /
• 2011

Casein micelles are the basic building block of rennet-induced gels. The stiffness of these gels is increased with reaction time. This is probably due to the continuous participation of activated casein micelles into growing network. Dual binding model of casein micelles, which explains assembly of casein and colloidal calcium phosphate, can provides fairly reasonable explanation for the changes in mechanical properties of rennet-induced gels made from different milk pHs and varying colloidal calcium phosphates. The changes in stiffness of these gels would be used for controlling textural properties of cheeses.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2534-2536
• /
• 2003

Color는 다른 물체로부터 하나의 물체를 특정짓기 위한 효과적이고 강인한 실마리이므로 color clustering이 많은 주목을 받고 있다. 그러나 불규칙한 조명변화에 의한 color 변이 때문에 color segmentation은 매우 어렵다. 이 논문은 B-spline 곡선을 이용한, HSI color space에서의 intensity 정보를 포함한 신뢰할 수 있는 color modeling 방법을 제안한다. 이것은 비록 HS 평균임에도 불구하고 단색 물체의 color 분포가 조명이 변함에따라 변한다는 사실에 기반한다. 이 접근법을 사용하면 피부색을 가진 영역의 color clustering이 불규칙한 조명변화에 적응될 수 있다.