• 대한한방종양학회지
• /
• 제4권1호
• /
• pp.17-36
• /
• 1998

This experimental study was carried out to evaluate the effects of Hwallakhyoreungdan on angiogenic inhibition mechanism. In order to investigate the effects of Hwallakhyoreungdan on angiogenic inhibition mechanism, MTT assay, cell adhesive inhibition effect, DNA fragmantaion analysis, Nuclear condensation assay, FACScan analysis, Angiogenic lumen formation assay, Immunocytochemistry analysis, RT-PCR for mRNA expression, Western blot analysis and Confocal analysis for $Ca^{2+}$ change were performed. The results were summarized as follows: 1. The cell adhesive inhibition ability was strong from $5{\mu}g/ml$. 2. The $G_0/G_1$ arrest peak was existed on ECV304 cell-line. 3. The cells on Collagen plate were inhibition of proliferation and inducement of apoptosis by HR water extract. 4. Angiogenic lumen formation was inhibited by HR water extract. 5. LFA-1 and ELAM-1's expression were inhibited by HR water extract. They are commenly participation on inflammation and tumor regeneration. 6. The expression of MMP-9 and uPA were inhibited by HR water extract. 7. The expression of integrin ${\alpha}_v{\beta}_3$ was inhibited by HR water extract. 8. The expression of intracellular molecule were successively inhibited by HR water extract therefore the proliferation of ECV304 cell line was stopped and apoptosis was induced. 9. The change of $Ca^{2+}$ was decreased by HR water extract it cause confusion of signal transduction pathway therefore it was take part in apoptosis. According to the results, Hwallakhyoreungdan showed to be a key antaonist of integrin ${\alpha}_v{\beta}_3$, and to be induction of apoptosis by p53 through flow cytometry. This report also demonstrated that expressions of MMP-9 and uPA was blocked under the angiogenesis model. Thus, we suggests that Hwallakhyoreungdan blocks angiogenesis by inducing apoptosis of ECV304 and ECVPAR cell lines and another oriental herbal medicine that treats blood-stasis type also has angiogenic inhibition effects.

• 한국수소및신에너지학회논문집
• /
• 제13권4호
• /
• pp.304-312
• /
• 2002

In this study, the performance of the $5Nm^3/hr$ compact type steam reformer which was developed for application of fuel cell or hydrogen station was evaluated in terms of gas process efficiency. For these purposes, reforming efficiency and total efficiency with system load change were analyzed. The reforming efficiency was calculated from the total molar flow of hydrogen output over total fuel flow input to the reformer and the burner on the higher heating value(HHV). In the case of the total efficiency, recovered heat at the heat recovery exchanger was considered. From the results, it was known that system performance was stable, because methane conversion showed the a slight decline which is about 2% though increasing system load to full. Reforming efficiency was increased from 20% to 58%, respectively as increasing system load from 10% to 90%. It was found that total efficiency was higher then reforming efficiency because of terms of heat recovered. As a results, it was known that total efficiency was increased form 75% to 83% at the 10% and 90% system load, respectively. From these results, it is concluded that compact steam reformer which is composed of stacking plate-type reactors is suitable to on-site hydrogen generator or to fuel cell application because of quick start within 1 hr and good performance.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.366-373
• /
• 2015

Sol-gel binder was prepared by hydrolysis and condensation reaction using boehmite sol and methyltrimethoxysilane as a function of aging-time. The coating slurry was composed of a plate-shape alumina in the sol-gel binder for the EPD process, in which particles dispersed in the slurry were deposited on the electrode under an electric field due to the surface charge. We studied the effects of three parameters: the content of boehmite, the aging time, and the applied voltage, on the physical, thermal, and electrical properties of the hybrid composite films by EPD. The amount of boehmite was 10 ~ 20 wt% and the aging time was 0.5 ~ 72, with a fixed amount of plate-shape alumina of 10 wt%. The condition of applied voltage was 5 ~ 30 V with a distance of 2 cm between the electrode during the EPD process. We confirmed that a structure of hybrid composite films of well-ordered plate alumina was deposited on the substrate when the film was prepared using a sol-gel binder composed of 15 wt% boehmite with 1 hr aging time and EPD at 10 V. The process shows a weight loss of 7% at $500^{\circ}C$ in TGA and a breakdown voltage of 8 kV at $87{\mu}m$.

• 약학회지
• /
• 제50권2호
• /
• pp.78-83
• /
• 2006

VISA and VRE are the main causes of surgical infection, urinary tract infections and bacteremia in hospitals. In this study; we selected VISA (Vancomycin Intermediate resistant Staphylococcus aureus) and VRE (Vancomycin Resistant Enterococcus) isolated from the clinical isolates. One of the isolated strains indicated the high resistance to severel anti-biotics (Vancomycin, Teicoplanin, Mupirocin, Synercid, Ciprofloxacin, Gentamicin, Lincomycin, Cefotaxim, Meropenem). Antimicrobial activity of Bifidobacterium spp. against VISA and VRE were measured. About $10^4$ cells of VISA or VRE were mixed with 1,5 and 9 ml of Bifidobacterium and the final volume was adjusted to 10 ml with brain heart infusion (BHI) broth. The cell suspension was incubated for 3, 6, 9, and 24 hr, serially diluted and then plated on BHI agar plate. As numbers of Bifidobacterium were increased viable cell count of VISA and VRE decreased. The strongest antimicrobial activity of the Bifidobacterium was observed after 9hr incubation in any mixture, almost completely inhibiting the growth of VISA and VRE.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.510-514
• /
• 2005

We have investigated the excitation-light source dependence of photo-catalytic efficiency for the benzene removal. The photo-catalytic module for the benzene removal is fabricated by a combination of GaN-based ultraviolet light-emitting diode (UV GaN-LED) and $TiO_2$ thin film coated on an aluminum plate. The benzene reduction rates of 365 nm and 375 nm modules at 60 mA junction current are approximately $8.95\;\%/Hr$ and $9.2\;\%/Hr$, respectively, which indicates that 365 nm GaN-LED is more effective than 375 nm GaN-LED. The benzene reduction efficiency is also noticeably dependent on the excitation wavelength and excitation-light power, as well as it is increased with the shorter wavelength and higher excitation power. This result exhibits that UV GaN-LED is useful to remove the volatile organic compounds (VOCs) existing in the environment.

• 대한소아치과학회지
• /
• 제25권2호
• /
• pp.312-322
• /
• 1998

There are many concerns about the erosive effect of acidic beverage. In this study, the erosive effect of bovine enamel caused by $Pepsi-Cola^{(R)}$(pH 2.41) and rehardening effect by intraoral exposure were determined by microhardness test and SEM. The bovine enamel specimen was imbedded in 100ml $Pepsi-Cola^{(R)}$ during 5 minutes and exposed to the intraoral environment with removable resin plate. The microhardness test was performed after 1 hr, 24 hrs, and 48 hrs. The results obtained from this study can be summarized as follows ; 1. The microhardness value was significantly (p<0.05) reduced by cola beverage, and significantly (p<0.05) increased after 1 hr and 24 hrs respectively. 2. The difference in the microhardness between 24 hrs group and 48 hrs group was not significant (p>0.05) and microhardness value of 48 hrs group was significantly less than that of initial group (p<0.05). 3. The erosive effect of cola beverage and remineralization effect by intraoral exposure were visualized by the SEM photo. But, the enamel surfaces did not return to their original state.

• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1383-1391
• /
• 1995

Hexagonal $\delta$-FeOOH was coated with Ba-Sol, which was produced by hydrolizing Ba(OC2H5)2, Ba-Sol coated $\delta$-FeOOH spread on a stainless plate, dried at 8$0^{\circ}C$ and then heat-treated. In this way, Ba-ferrite fine particles were produced. although there was a difference in a degree of hydrolysis of Ba(OC2H5)2, crystalline phase of Ba-ferrite appeared around 617$^{\circ}C$, and Ba-ferrite single phase was obtained after heat treatment at 80$0^{\circ}C$ for 2 hr. When Ba-ferrite was made from Ba-Sol coated $\delta$-FeOOH, $\delta$-FeOOH was thermally decomposed to $\alpha$-Fe2O3 at $700^{\circ}C$, producing a porous structure which was observed by TEM photographs. But the porous structure was not observed at 80$0^{\circ}C$. Ba-ferrite, heat-treated at 80$0^{\circ}C$ for 2 hr, had mean particle size of 1000$\AA$, lattice parameter of a0=5.889243 $\AA$ and c0=23.214502 $\AA$, a saturation magnetization ($\sigma$8) of 45.3 emu/g and a coercive force (Hc) of 5200Oe.

• 대한금속재료학회지
• /
• 제50권7호
• /
• pp.511-516
• /
• 2012

Low temperature ${\delta}$-precipitation phenomenon below 2-step aging ($718^{\circ}C$, $8hr+621^{\circ}C$, 8 hr) temperature of cold drawn Inconel 718 alloy wire was investigated. The investigation was carried out on wires with a cold drawn ratio of 0, 20, 50 and 70% using OM, SEM, XRD, TEM, and DSC. In microstructures of 50 and 70% drawn wire, many precipitates were found along the grain boundaries and the twin boundaries in deformation band. From the results of the XRD and TEM analysis, the precipitates were identified as plate-like ${\delta}$-phase. From the results of the DSC analysis, it was also found that a temperature of ${\delta}$-precipitation decreases with an increase of the cold drawn ratio. We concluded that cold drawing of inconel 718 wire promotes the ${\delta}$-precipitation, and under the condition of a high drawing ratio, the ${\delta}$-phase could be precipitated at a temperature below the aging temperature ($718^{\circ}C$).

• 한국수소및신에너지학회논문집
• /
• 제15권1호
• /
• pp.39-45
• /
• 2004

A 12-cell PEMFC stack was fabricated using the TiN-coated 316 stainless steel bipolar plates as substitute for the expensive and brittle graphite bipolar plates. Open cirtuit voltage and the maximum power of the stack was 12.08 V and 1.197 kW (199.5 A @ 6 V), respectively. Volumetric and gravimetric power density of the stack was calculated to be 373 W/L and 168 W/kg, respectively. Performance of each cell was quite uniform initially while degraded at a singnificantly different rate. During the 1,000 hr-operation at a constant load of 48 A, stack voltage decreased from 9.0 to 7.98 V at a degradation rate of 11 %/1,000 hr. However, degradation rate of each cell was in the wide rage from 1.2 to 31 %/1,000 hr.

• 한국수소및신에너지학회논문집
• /
• 제18권3호
• /
• pp.244-249
• /
• 2007

The present work considers the concept of enzymatic photoelectrochemical generation of hydrogen through water splitting using a Xe lamp as a source of light. A solar cell was applied to the system in order to shift the level of electrochemical energy of the system, resulting in the rate of hydrogen production at $43\;{\mu}mol/(cm^2{\times}hr)$ in cathodic compartment with an anodized tubular $TiO_2$ electrode(ATTE, $5^{\circ}C$/1hr in 0.5 wt% HF-$650^{\circ}C$/5hr). The trend of the rate of hydrogen production, for the ATTEs with different annealing temperature from $350^{\circ}C$ to $850^{\circ}C$, fairly well coincided with the photoelectrical properties measured by potentiostat. The actual chemical bias through imposition of two electrolytes of different pHs between anode(13.68) and cathode(7.5) was 0.24eV.