• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.373-378
• /
• 2007

On the homodyne interferometers, high pass filter(HPF) is usually used to remove the electrical noise in the interferent signal. Heterodyne interferometer has modulating frequency is shifted in the frequency region where the electrical noise effect is minimized by HPF effect. However, on the homodyne interferometer, the interferent DC-component of homodyne interferometer is unfortunately eliminated by using a HPF because its shifted frequency does not exist. Moreover, this effect is more serious the vibration amplitude is smaller. So, when unstable interferent signals via HPF are demodulated, a velocity is distorted. In this work, the mathematical explanation for the distortion of the homodyne interferent signal using the HPF is given. New synthetic heterodyne LDV based on the homodyne interferometer by exciting the reference mirror is proposed for the cancellation of the distortion. The optimum excitation condition of the mirror to compensate the distortion is discussed. The numerical simulation using the commercial MATLAB code is provided to show the effect of the proposed synthetic heterodyne LDV. The experimental results are also given and the effect of the proposed LDV is discussed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.379-384
• /
• 2000

The reactive and harmonic current components of dc loads can be compensated by the three-phase hybrid power filter (HPF) system. After compensation, the resulting current has sinusoidal and in-phase components with the source voltage. The HPF system is constructed by an active filter and passive filters. The passive filter reduce the 5th and 7th harmonic of the load current. The active filter compensates the remainder of the load current. Using the HPF system, a low cost harmonic compensator can be made. Performance of the HPF system is verified through simulation,

• 소성∙가공
• /
• 제19권4호
• /
• pp.203-209
• /
• 2010

In the hot press forming process (HPF), a martensitic structure is obtained by controlling the cooling rate when cooling a boron sheet that is heated up to over $900^{\circ}C$. The HPF process has various advantages such as the improvement in formability and material properties and minimal spring back of the deformed materials. The factors related to the cooling rate depend on the heat transfer characteristics between heated materials and dies. Therefore, in this study, the cooling rate is controlled by adjusting the heat transfer coefficient of the material at the pressing process. And, the mechanical properties and microstructure of the deformed material is demonstrated during the HPF process where cold dies are used to form the heated steel plate. This is achieved by varying the major forming conditions that control the cooling rate regarded as the most important process parameter.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.450-453
• /
• 2009

In order to overcome drawbacks of the advanced high strength steel such as inferior formability and large springback, the hot press forming process(HPF) has been being applied for forming of automotive sheet parts. Good formability and dimensional accuracy without springback as well as good crash performance of final products are the advantages of the HPF process. In this work, a method to characterize the mechanical properties of the HPF steel was developed based on the simple tension test at high temperatures and its finite element analysis, while it was applied to obtain strain rate and temperature dependent flow curves of the HPF steel. The final flow curves were represented by utilizing the Johnson-Cook type equation both in uniform and post-uniform deformation regions.

• Applied Microscopy
• /
• 제37권3호
• /
• pp.175-183
• /
• 2007

정확한 세포의 구조 분석을 위해서는 조직을 가능한 한 자연 상태 그대로 보존하는 것이 무엇보다 중요하다. 그러나 지금까지 이용되고 있는 화학적인 고정방법은 조직의 변형을 유도하는 것으로 알려져 그 해결방법에 관한 연구가 활발히 진행되고 있다. 그 연구의 결과로 현재 급속 동결법이 제시되었고, 그 중 초고압동결법(high-pressure freezing method)는 가용 두께가 $200{\mu}m$로서 $10{\sim}15{\mu}m$정도인 침윤동결법(plunging method) 혹은 접촉동결법 (slamming method)보다 우수한 방법으로 보고되고 있다. 본 연구팀에는 노랑초파리(Drosophila melanogaster)의 레티나를 화학고정법과 고압동결법으로 고정하여 미세구조를 비교하였다. 먼저 120kV 전자현미경을 이용하여 각 세포 소기관을 비교하였고, 그 중 미토콘드리아의 형태변화를 좀 더 자세히 비교하기 위하여 초고압전자현미경을 이용하였다. 그 결과 급속동결 세포의 세포막과 미토콘드리아의 고정에서 특히 차이가 있음을 알 수 있었고, 이는 주로 탈수에 의한 구조변형 때문인 것으로 추측된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.368-368
• /
• 2007

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.218-221
• /
• 2008

Hot Press Forming (HPF), an advanced sheet forming method in which a high strength part can be produced by forming at high temperature and rapid cooling in dies, is one of the most successful forming process in producing components with complex geometric shape, high strength and a minimum of springback. In order to obtain effectively and accurately numerical finite element simulations of the actual HPF process, the flow stress of a boron steel in the austenitic state at elevated temperatures has been investigated with Gleeble system. To evaluate the formability of the thermo- mechanical material characteristics in the HPF process, the FLDo defined at the lowest point in the forming limit diagrams of a boron steel has been investigated. In addition, the simulation results of thermo-mechanical coupled analysis of an automobile one-piece lower-arm part are compared with the experimental ones to confirm the validity of the proposed simulations.

• Journal of Multimedia Information System
• /
• 제7권3호
• /
• pp.231-238
• /
• 2020

This work presents a fully analog baseline wander tracking and removal circuitry using high-pass filter (HPF) based R-peak detection and quadratic interpolation that does not require digital post processing, thus suitable for compact and low power long-term ECG monitoring devices. The proposed method can effectively track and remove baseline wander in ECG waveforms corrupted by various motion artifacts, whereas minimizing the loss of essential features including the QRS-Complex. The key component for tracking the baseline wander is down sampling the moving average of the corrupted ECG waveform followed by quadratic interpolation, where the R-peak samples that distort the baseline tracking are excluded from the moving average by using a HPF based approach. The proposed circuit is designed using CMOS 0.18-㎛ technology (1.8V supply) with power consumption of 19.1 ㎼ and estimated area of 15.5 ㎟ using a 4^th order HPF and quadratic interpolation. Results show SNR improvement of 10 dB after removing the baseline wander from the corrupted ECG waveform.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.345-353
• /
• 2023

We propose a turbulence-tolerant Manchester on-off keying (M-OOK) transmission for free-space optical (FSO) communication. At the transmitter end, a M-OOK signal featuring a spectrum with low-frequency components absent is modulated and transmitted into a turbulent channel. At the receiver end, a low-pass filter (LPF) -based adaptive-threshold decision (ATD) with LPF-extracted channel-state information (CSI) and a high-pass filter (HPF)-based fixed-threshold decision (FTD) are employed to compensate for the effects of turbulence, owing to the low-frequency spectral characteristics of the turbulent channel. The performance of LPF-based ATD and HPF-based FTD are evaluated for various cutoff frequencies for the LPF and HPF. Besides, the proposed M-OOK transmission is compared to conventional non-return-to-zero OOK (NRZ-OOK) for different data rates. The proposed technique is verified in simulation. The simulation results show that the proposed M-OOK detection with optimized cutoff frequencies of LPF and HPF has better bit-error-rate (BER) performance compared to NRZ-OOK, and it is close to the theoretical ATD with the knowledge of precise CSI under various degrees of turbulence effects.

• 대한원격탐사학회지
• /
• 제28권1호
• /
• pp.39-54
• /
• 2012

본 연구의 목적은 KOMPSAT-2 위성영상에 가장 일반적으로 적용 가능한 영상융합기법을 제시하는 것이다. 가장 널리 사용되는 영상융합기법인 HPF, modified IHS, pan-sharpened, wavelet을 지역적, 계절적 특성이 서로 다른 4장의 KOMPSAT-2 위성영상에 적용하였고, 각각의 융합결과를 공간적, 분광적으로 비교분석하였다. 영상융합기법의 품질평가는 시각적 분석과 정량적 분석을 병행하여 수행하였으며, 정량적 분석에는 spatial ERGAS, spectral ERGAS, SAM, Q4가 사용되었다. 종합적인 분석결과를 고려할 때, pan-sharpened가 색상정보와 공간정보의 균형적인 보존 측면에서 다른 융합기법들에 비해, 상대적으로 우수한 결과를 나타냈다. modified-IHS의 경우, 공간정보는 잘 보존하였지만 다소 큰 색상 왜곡이 발생되었고, HPF와 wavelet은 색상 왜곡은 적었지만, 공간정보의 왜곡이 발생하였다.