• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.209-216
• /
• 2016

Latent fingerprint left on the adhesive sides of tapes can be easily found at a crime scene. Small Particle Reagents(SPR) based on iron oxide($Fe_3O_4$) is a technique for the detection of a latent fingerprint adhesive surface. In this study, found out that the causes affecting the quality of the fingerprints developed when used SPR based on iron oxide. To a suspension of 0.5g of iron oxide in 100ml of distilled water, 0.5ml or more surfactant were added can be developed latent fingerprints of good quality. In addition, using surfactants HLB(hydrophile-lipophile balance) value of 11~18 showed good contrast to the background and latent fingerprint.

• Journal of Applied Biological Chemistry
• /
• v.56 no.1
• /
• pp.53-57
• /
• 2013

In here, we investigated the quantitative analysis method of indole-3-acetic acid (IAA) and indole-3-butyric acid (IBA) with liquid chromatography-mass/mass spectrometry (LC-MS/MS) or gas chromatography-MS. Two ways of clean-up process were investigated for LC-MS/MS instrumental analysis of IAA, but both a simple dilution and hydrophile-lipophile balance (HLB) solid phase extraction (SPE) were not met the optimal recovery rates for quantitative analysis. On the other hand, the clean-up method for GC-MS was finally optimized through HLB-SPE from 250-folds diluted sample and methylation with trimethylsilyl chloride in methanol for 4 h. The limit of detection for methyl ester of IAA and IBA were both 1.4 mg/L, and recovery rates showed 93-107% from the concentrated liquid fertilizer.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.562-568
• /
• 2021

An O/W (oil in water) emulsion, wheat germ oil raw material, was produced by using natural wheat germ oil and composite sugar-ester. The effects of variables such as the hydrophile-lipophile balance (HLB) value, added emulsifier amount, and emulsification time on the average particle size, emulsification viscosity and ESI of O/W wheat germ oil emulsion were investigated. The parameters of the emulsification process produced by the central composite design model of the response surface methodology (CCD-RSM), which is a reaction surface analysis method, were simulated and optimized. The optimum process conditions obtained from this paper for the production of O/W wheat germ oil emulsion were 8.4, 6.4 wt%, 25.4 min for the HLB value, amount of emulsifier, and emulsion time, respectively. The predicted reaction values by CCD-RSM model under the optimum conditions were 206 nm, 8125 cP, and 98.2% for mean droplet size (MDS), viscosity, and ESI, respectively, based on the emulsion after 7 days. The MDS, viscosity and ESI of the emulsion obtained from actual experiments were 209 nm, 7974 cP and 98.7%, respectively. Therefore, it was possible to design an optimization process for evaluating the stability of the emulsion of wheat germ oil raw material by CCD-RSM.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.174-177
• /
• 1998

The effects of surfactants affecting polycyclic Aromatic Hydrocarbon(PAHs) solubility and biodegradation in soil slurry were investigated. The critical micelle concentration(CMC) values of surfactants used in this study were 12.7mg/L(Brij 30), 13.4mg/L(Tween 80), 13.6mg/t(Triton X-100). The solubility of PAH increased as the Hydrophile-Lipophile Balance(HLB) value of surfactant decrease. At surfactant biodegradation and toxicity experiement using respirometer, Brij 30 did not show any toxic effect and substrate inhibition upon the level of 1.5g/L. Also, biodegradation of Brij 30 gave no reduction on the phenanthrene biodegradation rate. When the desorption rate of phenanthrene between sand and clay is compared, lower percentage of phenanthrene was desorbed at clay because of the larger surface aera and higher organic content of clay. At the biodegradation experiments of phenanthrene in soil slurry phase, more than 90% of initial phenanthrene adsorbed onto both sand and clay were biodegraded by phenanthrene- acclimated cultures.

• Journal of Microbiology
• /
• v.43 no.3
• /
• pp.272-276
• /
• 2005

Bacillus subtilis ATCC 6633 was grown in BHIB medium supplemented with $Mn^{2+}$ for 96 h at $37^{\circ}C$ in a shaker incubator. After removing the microbial biomass, a lipopeptide biosurfactant was extracted from the supernatant. Its structure was established by chemical and spectroscopy methods. The structure was confirmed by physical properties, such as Hydrophile-Lipophile Balance (HLB), surface activity and erythrocyte hemolytic capacity. The critical micelle concentration (cmc) and erythrocyte hemolytic capacity of the biosurfactant were compared to those of surfactants such as SDS, BC (benzalkonium chloride), TTAB (tetradecyltrimethylammonium bromide) and HTAB (hexadecyltrimethylammonium bromide). The maximum hemolytic effect for all surfactants mentioned was observed at concentrations above cmc. The maximum hemolytic effect of synthetic surfactants was more than that of the biosurfactant produced by B. subtilis ATCC 6633. Therefore, biosurfactant would be considered a suitable surface-active agent due to low toxicity to the membrane.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.140-145
• /
• 2011

The effects of nonionic surfactant solutions of 0.1g/dL on detergency and liquid wetting/retention properties of soiled polyester/cotton(65/35) cloth were studied. Soiled polyester/cotton(65/35) cloth (EMPA 104) and 10 different nonionic surfactants (Span 20, Tween 20, 40, 60, 80, 21, 61, 81, 65, 85) were used in the study. The water retention and liquid retention capacity values of soiled cloth were decreased compared with those of unsoiled cloth. The wetting and water retention of soiled cloth improved with addition of surfactants, whereas water retention ratio(W/H) values didnot change markedly. Generally surfactants with low surface tension and high HLB (Hydrophile-lipophile balance) were more effective in improving the wetting/retention properties of soiled cloth. Nonionic surfactants having high ethylene oxide contents of 20 moles; i.e., Tween 20, 40, 60 & 80, showed better detergency than low ethylene oxide contents of 4 moles; i.e., Tween 21, 61 & 81. As HLB values of surfactants and $cos{\theta}$ of the soiled cloth increase, the detergency values of soiled cloth increased.

• Analytical Science and Technology
• /
• v.29 no.4
• /
• pp.179-185
• /
• 2016

An effective analytical method has been developed for the determination of β-blockers(atenolol, metoprolol and propranolol) and 6 β-lactams(amoxicillin, penicillin G, cefaclor, cefadroxil, cephalexin and cephradine) in water samples using two different cartridges. The samples were extracted by solid-phase extraction (SPE) with the usage of polymeric hydrophile-lipophile balance(HLB cartridges) and strong cation-exchange mixed-mode polymeric sorbent (MCX cartridges). A XDB-C₁₈ column(1.8 μm; 3.0 mm × 100 mm) was used for the sufficient chromatographic resolution. The calibration curves showed good linearity with high correlation coefficients (>0.995). The method detection limits (MDL) and the limits of quantification(LOQ) were from 1.1 to 3.9 ng/L and from 5 to 13 ng/L, respectively. The method was applied for the determination of the target compounds in tributaries and raw water of the Han River and these were found at N.D. to 0.209 μg/L.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.180-188
• /
• 1992

By means of the compatibility according to solving environmental pollution and energy problem due to the emissions of NOx and smoke from diesel engine this paper experimentally inspected the effect of using emulsified fuel, gas oil-water, for combustion characteristic, that is combustion pressure, pressure rise rate, heat generating rate, the period of ignition delay and specific fuel consumption, and CO, HC, NOx concentration and smoke density. When using emulsified fuel, as a water addition rate was increased, combustion pressure, pressure rise rate and heat generating rate was increased, the period of ignition delay was lengthening, the specific fuel consumption was some what increased in contrast to diesel fuel in low load, but deceased in high load region. And NOx concentration was decreased, CO concentration was increased in low load, but decreased in high load region, HC concentration was increased in contrast to diesel fuel in all region.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.319-324
• /
• 1990

The effects of pH, protein and fat content, addition of emulsifiers, stabilizer, sugar, salt and calcium salt on the stability of soymilk suspension were investigated by analyzing the cream separated and precipitates of soymilk which is prepared by various conditions. In the alkaline region of pH, soymilk showed a good stability of the suspension and particularly, above pH 10, precipitates were not formed. When 1.5% of palm oil with 0.4% of glycerine monostearate was added to soymilk in the hydrophile-lipophile balance (HLB) value of 4 to 7, resulted maximal emulsion stability occured below H LB 6. The stability was decreased with increasing the fat concentration and soy oil showed better emulsion stability than that of palm oil. Among the commercial stabilizers, 0.03% of carrageenan was most effective. The stability was not decreased by addition of sugar up to 3% while it was decreased by addition of sodium salt and calcium salt at low level.

• Clean Technology
• /
• v.14 no.4
• /
• pp.256-264
• /
• 2008

In this study, using PBAST (poly(butylene adipate-co-succinate-co-terephthalate)) which was eco-friendly biodegradable aliphatic polyester, PBAST/PVA (poly(vinyl alcohol)) double-layered hollow microspheres were prepared with the water/oil/water multiple emulsion ($W_1/O/W_2$) method. The double-layered hollow microspheres were manufactured with the yield of 30.92% when the concentration of polymer PBAST in organic phase was 5 wt%, the concentration of PVA in inner aqueous phase was 5 wt%, the volume ratio of $W_1/O$ emulsion to outer aqueous phase was 1:4.5, and when co-surfactants that had large gap in HLB (hydrophile-lipophile balance) value were used. The bulk density of prepared hollow microsphere was 0.180 g/ml and particle size was $1.5{\sim}3\;{\mu}m$.