• The Transactions of the Korea Information Processing Society
• /
• v.5 no.10
• /
• pp.2676-2685
• /
• 1998

In order to improve the branch prediction accuracy and to reduce the BTB miss rate, this paper proposes a two-level BTB structure that adds small-sized victim BTB to the convetional BTB. With small cost, two-level BTB can reduce the BTB miss rate as well as improve the prediction accuracy of the hybrid branch prediction strategy which combines dynamic prediction and static prediction. Through the trace-driven simulation of four bechmark programs, the performance improvement by the proposed two-level BTB structure is analysed and validated. Our proposed BTB structure can improve the BTB miss rate by 26.5% and the misprediction rate by 26.75%

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.411-413
• /
• 2012

This study has been investigated about hygrothermal environmental effects on the pin-joined carbon/epoxy composites through acoustic emission technique. The specimens were classified as three types for pin loading test : Base (before immersion), RT (room temperature immersion), HT ($75^{\circ}C$ immersion). As a results, the bearing strength of RT specimens was weakly decreased than that of base specimens. The bearing strength of HT specimens was greatly decreased than that of Base and RT specimens due to effects of simultaneous moisture and higher temperature. Also, the results from cumulative hit of acoustic emission indicated that AE events induced by matrix cracks of HT specimens was lower than that of base specimens.

• Transactions of Materials Processing
• /
• v.14 no.4 s.76
• /
• pp.360-367
• /
• 2005

The injection-molded plastic parts have many surface defects: warpage, weldline, flowmark, zetting, scratching, shading and so on. As weldline was one of the major surface defects in the case of desktop monitor, warpage and surface shrinkage are the bigger problems of LCD monitor in the pursuit of light weight and thinner thickness of parts. Some measures to improve these defects were introduced in this paper. Based on these, the laboratory work to find out the optimum processing conditions and to get the best parts was repeated injection moulding try-out after reflecting these improvements. The defects of warpage and surface shrinkage was significantly improved after the improvements in the case of the 20.1 inch even if in the 15 and 17inch case the warpage size was a lttle over the allowed specification because of not taking the measure for parts design within the allowable limits from the required specification in the cause of cost down.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.4 no.2
• /
• pp.31-37
• /
• 1995

This study is focused on the prediction of appropriate tool life by clarifying the correlation between progressive tool wear and AE signal. when rcutting SM45C by End mill in machining center. First of all, end mill have a problem that position of sensor sticking because it is revolution tool, but I think that it can be bained specific character according to sticking Sensor in the Vise. Consequently, the following results have been obtained; 1. Each cutting speed of feed rate over 0.1mm had a tendency to increase linearly according to the RMSAE 2. The level of AE signal at the same cutting area was more sensitive to depth of cut tharn the variation of feed rate 3. In the range of cutting duringqr about 75minqr atqr cutting speed 27m/min flankqr wear turns up aboutqr 0.21mm, aboutqr 0.29mm in the caseqr of about 65minqr at 33/min, qr hereby RMSAE increased rapidly at 0.2mm flank wear, also AE-HIT and CUM-CNTS.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.143-146
• /
• 2004

This is a thesis that 100W class open frame type power module of a quarter-brick size appropriate for telecommunication is reported. The input voltage is established between 36 and 75 in range in order for power module to be utilized for the telecommunication, and output were set at 3.3V and 30A. A number of parts used for transformer, inductor, and hit sink are composed of PCB in order for DC-DC converter to be lowered below 8 mm. A constant current control circuit was annexed to the system as well as basic protection prototypes such as over-voltage, over-current, and over-temperature were well considered to enhance more credibility, and were tested. As a result, high circuit performance and credibility turned out to be significant.

• International Journal of Contents
• /
• v.5 no.2
• /
• pp.53-58
• /
• 2009

This paper presents a novel approach in the design of a CAM for an asynchronous cache. The architecture of cache mainly consists of four units: control logics, content addressable memory, completion signal logic units and instruction memory. The pseudo-DCVSL is useful to make a completion signal which is a reference for handshake control. The proposed CAM is a very simple extension of the basic circuitry that makes a completion signal based on DI model. The cache has 2.75KB CAM for 8KB instruction memory. We designed and simulated the proposed asynchronous cache including CAM. The results show that the cache hit ratio is up to 95% based on pseudo-LRU replacement policy.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.713-717
• /
• 2004

This is a thesis that a quarter-brick size of 100W class open-frame type on board power module comprising telecommunication application is reported. The input voltage is established between 36 and 75 in range in order for power module to be utilized for the telecommunication application, and output were set at 3.3V and 30A. A number of parts used for transformer, inductor, and hit sink are composed of PCB in order for DC-DC converter to be lowered below 8 mm. A constant current control circuit was annexed to the system as well as basic protection prototypes such as over-voltage, over-current, and over-temperature were well considered to enhance more credibility, and were tested. As a result, high circuit performance and credibility turned out to be significant.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1266-1268
• /
• 2004

This is a thesis that a quarter-brick size of 100W class open-frame type on board power module comprising telecommunication application is reported. The input voltage is established between 36 and 75 in range in order for power module to be utilized for the telecommunication application, and output were set at 3.3V and 30A. A number of parts used for transformer, inductor, and hit sink are composed of PCB in order for DC-DC converter to be lowered below 8 mm. A constant current control circuit was annexed to the system as well as basic protection prototypes such as over-voltage, over-current, and over-temperature were well considered to enhance more credibility, and were tested. As a result, high circuit performance and credibility turned out to be significant.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.1 no.1
• /
• pp.75-87
• /
• 1997

To study the behavior a deck when it was collide with the ship approaching to the deck to berth, it was analyzed the effect zone by the ship collision which consists of deck slab and PC piles of the quay. The numerical technique is used to simulate the behavior of the deck when the ship hit the expansion joint of deck between the deck slabs. The failure behavior and zone of the deck are determinated by the comprehensive numerical study. The impact energy by the ship is also evaluated. It is concluded that these numerical analysis gave a reasonable estimation of the remedial area of the deck damaged by ship collision.

• Journal of Sasang Constitutional Medicine
• /
• v.28 no.2
• /
• pp.110-122
• /
• 2016

Objectives The purpose of this study was to develop the Sasangin Diagnostic Questionnaire for Specialist(SDQ_S) and to evaluate the reliability and validity of SDQ_S for standardization of sasang constitutional diagnosis by korean medicine Specialist in clinical practice.Methods SDQ_S was developed through discussions of three sasang constitutional medical specialist. We recruited 210 subjects aged from 20 to 70, and conducted the evaluation of SDQ_S and sasang constitutional diagnosis. For the reliability test, internal consistency was examined by calculating the cronbach's α coefficient on 88 items excepted measurements of trunk, and independence and agreement was examined by chi-square test and McNemar test for 84 subjects which retested SDQ_S. For the validity test, discriminant functions was derived from the sample group(105 subjects), and they were applied to the test group(105 subjects). We identified the hit-ratio of SDQ_S in the test group.Results and Conclusions In the reliability test, the cronbach's α coefficient was 0.664 and 87 items(98.9%) have dependent relationships between 1st test and 2nd test. And 39 items(44.3%) have high agreements(0.8≤McNemar), 26 items(29.5%) have common agreements(0.4≤McNemar<0.8). In the validity test, four discriminant variables(Soeum Index, Taeeum Index, Torso Ratio I, Taeyang Index) were selected, and two discriminant functions were derived. Total hit-ratio was 74.2%, and hit-ratio of Taeeumin(76.7%) was higher than that of Soeumin(75.9%) and Soyangin(69.7%). SDQ_S has good reliability and validity for sasang constitutional diagnosis.