• 한국임상수의학회지
• /
• 제20권1호
• /
• pp.104-109
• /
• 2003

This study was performed to evaluate the postoperative heating process according to lameness degree, swelling, and muscle atrophy after femoral head and neck ostectomy on Retriever dogs with hip dysplasia and hindleg lameness. Femoral head and neck ostectomy (FHO) was performed for the repair of hip dysplasia in 4 Retriever dogs (5 hips) referred in veterinary medical teaching hospital of college of veterinary medicine, Konkuk University. Age (Mean $\pm$ SD) of patients was 10.3 $\pm$ 3.0 months (range,7 to 16 months) and body weight (Mean $\pm$ SD) was 28.2 $\pm$ 3.4 kg (range, 25 to 34 kg). After FHO, all cases are treated with carprofen (2.2 mg/kg, PO bid, tapering at interval 1-2 weeks) and physical therapy including passive range-of-motion exercises. In all cases, lameness degree was showed V at the next day after surgery, IV at 5 to 7 days, II-III at 30 to 35 days, II at 60 days, and I at 105 to 114 days. These results suggested that femoral head and neck ostectomy was able to be performed on large breed dogs with hip dysplasia and hindleg lameness.

• 한국결정성장학회지
• /
• 제28권6호
• /
• pp.250-255
• /
• 2018

본 연구에서는 3D-프린팅 적층 공정으로 제조한 인공관절용 CoCrMo 합금 소재의 HIP 처리를 포함한 복합열처리 후 소재의 인장특성, 내마모 특성 등의 기계적 특성과 결정구조 및 미세조직 등의 재료특성 변화를 고찰하였다. 내부마이크로 기공을 제거하기 위한 HIP 열처리와 금속탄화물 생성을 위한 상압열처리 및 금속탄화물의 균질화를 위한 용체화 열처리를 거치는 복합열처리 공정을 실시하여 인공관절 소재로서의 특성을 부여하고자 하였다. 3D-프린팅 적층 공정으로 제조한 인공관절용 CoCrMo 합금 소재의 복합열처리 효과는 HIP 공정중의 치밀화 과정, 상압열처리 중의 금속탄화물 생성 및 용체화 열처리 과정중의 금속탄화물의 균질화 효과임을 XRD, FE-SEM, EDS 분석으로 확인하였다.

• 한국분말재료학회지
• /
• 제17권2호
• /
• pp.113-122
• /
• 2010

Two kinds of oxide-dispersion-strengthened (ODS) 316L stainless steel were manufactured using a wet mixing process(wet) and a mechanical alloying method (MA). An MA 316L ODS was prepared by a mixing of metal powder and a mechanical alloying process. A wet 316L ODS was manufactured by a wet mixing with 316L stainless steel powder. A solution of yttrium nitrate was dried after being in the wet 316L ODS alloy. The results showed that carbon and oxygen were effectively reduced during the degassing process before the hydroisostatic process (HIP) in both alloys. It appeared that the effect of HIP treatment on increase in impact energy was pronounced in the MA 316L ODS alloy. The MA 316L ODS alloy showed a higher yield strength and a smaller elongation, when compared to the wet 316L ODS alloy. This seemed to be attributed to the enhancement of bonding between oxide and matrix particles from HIP and to the presence of a finer oxide of about 20 nm from the MA process in the MA 316L ODS alloy.

• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.407-412
• /
• 2010

새로운 티타늄기 MMCs(W/ Ti-6Al-4V)에 대한 기계적 특성에 대한 연구를 행하여 평가한 결과를 나타내었다. HIP(hot isostatic pressing) 제조법과 RS(Rotary Swaging) 2 차 가공을 통하여 텅스텐 섬유 함유율이 각각 6, 9, 12 vol%인 W/Ti-6Al-4V MMCs 를 제작하였으며, 경도는 기존의 Ti-6Al-4V 합금과 비교하여 20-30%, 인장강도는 50%(비강도-38%) 높은 값을 얻었다. 섬유 함유율 9vol.% 에서 가장 높은 인장 값을 나타내었으며, MMCs 에서 메트릭스와 계면 사이에 생성된 확산상에 의해서 경도 및 인장강도가 향상되었다. 또한 피로 강도를 향상 시키기 위한 방법으로 메트릭스의 질적 향상을 위한 HIP 제작조건에 대한 추가적인 연구가 필요하다.

• 한국분말재료학회지
• /
• 제14권5호
• /
• pp.315-319
• /
• 2007

Pure WC or WC with low Co concentration less than 0.5 wt.% is studied to fabricate high density WC/Co cemented carbide using vacuum sintering and post HIP process. Considering the high melting point of WC, it is difficult to consolidate it without the use of Co as binder. In this study, the effect of lower Co addition on the microstructure and mechanical properties evolution of WC/CO was investigated. By HIP process after vacuum sintering, hardness and density was sharply increased. The hardness values was $2,800kgf/mm^2$ using binderless WC.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.617-624
• /
• 2000

Abnormal grain growth in alumina was investigated during sinter-HIP process for better understanding of pressure effect on microstructural development. Abnormal grain growth of monolithic alumina was observed near surface region rather than interior region of specimen. Finite element analysis was used to estimate the pressure distribution developed in the specimen. Pressure distribution analysis was in good agreement with grain size distributjion in the specimen. The results of finite element analysis provided that abnormal grain growth monolithic alumina was resulted from the inhomogeneous pressure distribution in the specimen. MgO addition in alumina was effective for the suppression of abnormal grain growth in alumina under inhomogeneous pressure distribution during sinter-HIP process.

• 복식문화연구
• /
• 제20권4호
• /
• pp.529-534
• /
• 2012

An analysis of adult women's somatotypes classified by drop values can provide important preliminary data in determining standard clothing sizes for mass production of ready-made clothes. This is because the values are based on measurements of girth, which is essential information in the size-setting process. Adult women's body types are classified according to drop values in a standard clothing size system adopted by Korea and several other countries. This study aims to identify somatotype characteristics of adult women aged 20 to 69 by using five types of drop values: bust-waist, hip-waist, hip-bust, abdomen-waist, and hip-abdomen. Statistical cluster analysis of collected data revealed four somatotypes among adult women. Type R, with a developed lower body, accounted for 36.6%, and its bodyline was found to be closest to the average adult woman. Type X, constituting 25.4%, had the curviest contours of all and relatively large hip measurements, with the thinnest figure. Flat abdomen and hips characterized type Y, which accounted for 18.9%. Lastly, 19.0% fell into type H, the most obese figure, in which abdomen girth exceeded hip measurements. Since type H has excess fat deposits in the abdomen, not only hip measurements but also abdomen girth should be considered when designing top longer than torso-length and bottoms.

• 한국전문물리치료학회지
• /
• 제21권2호
• /
• pp.8-17
• /
• 2014

The purpose of this study was to examine the effects of hip joint mobilization (HJM) on walking ability, balance ability, and the joint range of motion in stroke patients to minimize the problems of the musculoskeletal system in patients with central nervous system diseases. All volunteers were randomly assigned to the HJM group ($n_1=14$) and the general neurodevelopment therapy (NDT) group ($n_2=16$). The HJM procedure involved applying Maitland mobilization techniques (distraction, lateral gliding, inferior gliding, and anterior gliding) by grade 3 to both hip joint. The mobilization process included mobilization and NDT for 15 min/day, 3 days a week for 4 weeks. The outcome measures were evaluated, including the hip joint passive range of motion (ROM) test and femur head anterior glide test (FHAG) using prone figure four test, dynamic and static balance abilities [timed up and go (TUG) test and center of pressure (COP) analysis], and walking ability [10-meter walking test (10MWT) and 6-min walking test (6MWT)]. Both the groups showed significant post-training differences in the hip joint ROM (FHAG and degree of hip extension) and 10MWT. The post-training improvements in the TUG test were significantly greater in patients of the HJM group than in the NDT group; however, there were no post-training improvements in COP in both groups. Patients in the HJM group showed post-training improvement in the 6MWT; however, statistically significant differences were not observed. Patients in the NDT group showed post-training improvements in the 6MWT. These results suggest that HJM improves hip joint ROM, dynamic balance ability, and walking speed in stroke patients. However, further studies are required to evaluate the long-term therapeutic efficacy of HJM in stroke patients.

• 한국주조공학회지
• /
• 제10권2호
• /
• pp.162-170
• /
• 1990

The major effects of RSP sre 1) extension of solid solubilities, 2) formation of metastable phaeses, 3) microstructural refinement 4) segregationless. The main trust of this study was to investigate the effects of superimposing RSP on the structure and properties of HSLA steels. Powder was made by NGA (Nitrogen Gas Atomization) process, and consolidated by HIP. The high grain-coarsening resistance of NGA-HIP steels was attributed to a fine dispersion of oxide precipitates. The average grain size for the NGA-HIP steels was somewhat finer than that for the conventional HSLA steels, The impact properteis of NGA-HIP steels were improved over those of the conventional HSLA steels.

• 대한정형도수물리치료학회지
• /
• 제29권3호
• /
• pp.85-99
• /
• 2023

Background: This study aimed to investigate the effects of a complex manual therapy program on hip and knee pain occurring together with menstrual pain and iliotibial band tightness in a woman with sacroiliac joint dysfunction. Methods: This study was carried out over a period of 3 months by dividing the treatment process into three sequential stages. Intensities of menstrual pain, hip pain, and knee pain, and hip range of motion (ROM) in the participant were assessed at baseline and at the end of each stage, and a modified intervention was applied according to results of assessments after each stage. Results: There was a decrease in the intensity of menstrual pain after the first and third stages of treatment, and there were reductions in the intensities of hip and knee pain after the third stage. Hip ROM was rather decreased after the second stage, but it was increased after the third stage. Conclusion: The findings of this study indicate that treatment of the instability and positional fault of sacroiliac joint can relieve hip and knee pain, improve hip ROM, and alleviate primary dysmenorrhea in patients with sacroiliac joint dysfunction.