• 한국의류학회지
• /
• 제36권9호
• /
• pp.940-951
• /
• 2012

This study evaluates the fit preference of the tailored jacket according to body types for 20's adult women through a comparison of real and virtual fit. A five point fit evaluation scale utilizing a wearer acceptability scale by Shen and Huck was used to evaluate the degree of the preference of real and virtual fit. This scale contained 23 items in three categories: front fit, back fit, and side fit. For each item, 5 responses from 'too tight' fit (1 point) to 'too loose' fit (5 point) were possible. The middle position for each fit criterion indicated a 'good' fit (3 point). The data were analyzed with a t-test using statistical program SPSS 17.0. According to the results, there were no significant differences ($p{\leq}.05$) between the real and virtual fit preference in total measurement items such as front collar, lapel and roll line, front shoulder slope, front armhole, front waist, abdomen, sideseam, hemline, front silhouette, side shoulder, side armhole, side sleeve width, side hip, side silhouette, back collar stand, upper back, back armhole, back waist, back hip, back silhouette except front bust, side waist, and back center back. The factor that caused a difference in the fit preference between the real and virtual fit evaluation was a specific body type such as Body Type A that indicated a small bust circumference and a big hip circumference.

• 디지털콘텐츠학회 논문지
• /
• 제19권1호
• /
• pp.199-204
• /
• 2018

본 논문에서는 가상 공간에서 객체와의 상호 작용을 위한 빠른 충돌 감지 방법을 제안하였다. 먼저 메쉬 그룹화 단계에서는, 전체 공간을 일정한 크기의 소공간들로 분할하고, 각각의 소공간에 속하는 메쉬들에 대하여 이들을 모두 포함하는 최소의 기본 입체도형(육면체 혹은 구)의 위치와 크기를 정함으로써 그룹화한다. 충돌 검출 단계에서는, HIP(Haptic Interface Point)가 어떤 그룹을 대표하는 입체도형 내부에 들어 있는지를 검사하여 특정 입체도형과의 충돌이 확인되면 해당 그룹의 메쉬들만을 대상으로 실제 충돌이 일어난 메쉬를 찾는다. 본 논문에서 제안한 방법을 적용한 경우와 적용하지 않은 경우의 연산시간을 측정 및 비교함으로써 제안한 알고리즘의 효용성을 확인하였다.

• 한국의류산업학회지
• /
• 제4권6호
• /
• pp.534-543
• /
• 2002

The purpose of this study was to identify the body proportions of girls in middle and high school who have been a major sales target of clothing manufacturers and thus to provide the basic information on the proportion of human body, which is essential for manufacturer to produce clothing and for individual consumers to select right apparels to wear and purchase. The subjects were 133 girls in middle school and 141 girls in high school. As measuring instruments, the Martin's anthropometer, tapelines, and belts for marking waistline were used. In order to analyze the data, t-test and factor analysis were used. The measurement of vertical distance between vertex and measuring points, showed a significant difference between the high school group and middle school group in every item. In the comparison of eight head proportion between the two groups, middle school students had 7.2 head proportion while girls in high school had 6.9 head proportion in detail. The factor analysis of major divided body parts of the two groups indicated that waist-hip and hip-crotch, constituting lower trunk together, vertex-apex nasi, and apex nasi-back neck point, constituting head together, back neck point-spina scapula and spina scapula-waist, constituting posterior of upper body together, and mentum-bust point and bust point-waist, constituting anterior of upper body together, were in inverse proportion.

• 한국전문물리치료학회지
• /
• 제13권3호
• /
• pp.10-17
• /
• 2006

The purpose of this study was to determine the consequence of resistance strengthening exercise on the hip flexor and extensor performed to improve functional mobility in stroke patients more than six months post stroke. Seventeen patients were randomized into two groups. Both groups received conventional physical therapy for six weeks. In addition, the experimental group performed eccentric resistance strengthening exercise in the hip flexor and extensor using an isokinetic dynamometer. The hip flexor and extensor strength, stair up and down mobility, timed get up and go (TUG), 10 m gait velocity, and functional reach were repeatedly measured at baseline, three weeks, and six weeks after treatment. The results were as follows: 1. The experimental group improved more remarkably in the hip flexor and extensor strength, stair up and down mobility, and the 10 m gait velocity after three weeks and six weeks of treatment (p<.05), 2. The control group improved significantly in the hip flexor and extensor strength, and 10 m gait velocity after three weeks of treatment (p<.05), 3. At each three and six week point, the experimental group made greater gains in hip flexor and extensor strength, stair up and down mobility, and 10 m gait velocity than the control group (p<.05). In conclusion, it is desirable to perform resistance strengthening exercises combined with conventional physical therapy to improve functional mobility in chronic stroke patients.

• 한국의류산업학회지
• /
• 제19권4호
• /
• pp.504-514
• /
• 2017

Discomfort as well as muscular pain and musculoskeletal diseases occur in cases of stressed posture due to prolonged pressure. Therefore, the American Academy of Orthopaedic Surgeons (AAOS) and Pediatric Orthopaedic Society of North America (POSNA) recommend that bags that weigh no more than 15 - 20% of the wearer's weight. However, despite the prolonged pressure from using baby carriers, there are no recommendations and limited studies on how to protect wearers. Therefore, this study investigates subjective fatigue according to the usage of waist support and hip seat. Based on this, muscle fatigue and secondary subjective fatigue according to three types of currently commercial baby carriers (X-type, H-type, and H-hip type) were measured. Subjective comfortability was evaluated on a 5 point Likert-scale and subjective fatigue was evaluated on Borg's CR-10 scale. Objective muscle fatigue was also compared by measuring and analyzing electromyogram (EMG). The results of primary subjective fatigue showed statistically significant changes in the shoulders, waist, calves, and soles of the feet according to the usage of hip seats and waist support. Electromyogram measurements also showed less muscle fatigue at the upper trapezius muscle and thoracic erector spine muscle for the H-hip seat baby carrier, which has both waist support and hip seat, compared to an X-type baby carrier, which has neither. However, results of subjective fatigue showed opposite results at the waist despite having same results at the shoulders and beneath the shoulders. This show discrepancies between objective muscle fatigue and subjective fatigue; therefore, that both aspects must be taken into consideration when developing ergonomic baby carriers.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.668-671
• /
• 2003

A concept of deadlock point of fuzzy sequential circuit is proposed. There are six cases of fuzzy sequential circuits of 1 state and 1 input variables with deadlock points. Examples of each case are shown both in a form of characteristic equation and in a graphical illustration. As fuzzy sequential circuit with 1 state and 1 input variables, D and T fuzzy flip-Hops are also characterized using the proposed concept. Thus one of the four types of D fuzzy Hip-Hops and T fuzzy Hip-flop have a deadlock point 1/2.

• 한국의류산업학회지
• /
• 제13권1호
• /
• pp.116-129
• /
• 2011

The purpose of this study is to research on changes of body surface according to golf movements in designs of golf slacks pattern and reflect it to designs of golf slacks pattern to enhance adaptability. For the first stage of this study, length of body surface was analyzed by using 3D body shape. In second stage, analysis of wearing test of golf slacks is performed to extract major pattern design factor of golf slacks and then research patterns were designed. In third stage, 4 differently designed 1st, 2nd slacks were used for analysis of 3D Clothing air volume. The results of this research is as follow. The variation rate of body surface length according to golf swing posture resulted the longest on back swing posture and follow through posture. Waist circumference-omphalion, thigh and ankle circumference increased more than 10% of body surface during golf swing. Front waist circumference-omphalion, right waist to hip length, left waist to hip length and right back center length were decreased more than 10%. As a result of analysis on measurements of 1st slacks pattern design, waist front center getting in values, waist front center going down value, front hip width, and front crotch extension had similar industrial pattern design. Back center line angle, back crotch extension, and knee center point~back waist center point had significant differences. The designs and ease proposed for golf slacks pattern in this study are waist circumference 75.5 cm(1.8 cm, 2.38%), hip circumference 95 cm(2 cm, 2.11%), crotch length(front: -0.8 cm, -1.25%; rear: -1.8 cm, -2.83%), slacks length 96c m, gradient of C.B.L $10^{\circ}$, crotch extension (back 9.2~10.4 cm, front 3.2 cm).

• 한국의류학회지
• /
• 제30권12호
• /
• pp.1690-1696
• /
• 2006

본 연구는 복부가 비만한 노년 여성의 의복의 패턴설계를 위한 기초 자료를 제공하기 위한 목적으로 수행되었으며 이들의 체형특성을 분석하고 일반 노년 여성과의 상반신 및 하반신 체형특성의 차이점을 파악하고자 하였다. 연구대상은 60세 이상 서울 및 서울 근교에 거주하는 노년 여성 318명-복부비만 251명, 일반인 67명-이며 직접측정을 실시하였다. 복부비만의 기준은 허리엉덩이둘레비(WHR)가 0.85 이상인 피험자로 하였다. 높이항목, 두께항목, 너비항목, 길이항목 및 몸무게로 구성된 총 33개 측정치 및 측정치를 토대로 한 계산치 및 지수치를 이용하여 기술통계분석, 상관분석, T검정을 실시함으로써 이들의 복부돌출요인에 따라 의복구성에 고려해야 할 체형특성을 파악하고, 이를 일반 노년 여성과 비교분석하였다. 연구결과 복부비만 노인은 일반 노인보다 높이항목과 어깨너비 등 어깨관련항목을 제외한 두께, 둘레, 길이 항목에서 유의한 차이를 보이며, 로러지수와 버벡지수, 체간부의 편평률에서도 유의차를 보여 전체적 인 비만도가 높으며 체간부 형태가 원통형을 나타낸다. 또한 복부비만 노년 여성의 경우 상관관계 분석결과 엉덩이둘레보다 배둘레나 엉덩이외포둘레가 패턴 설계에 필요한 주요 항목들과 더 높은 선형적 상관성을 보이므로 패턴의 기준항목 설정시 이를 고려하여 제작하여야 할 것이다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.234-238
• /
• 1999

This study suggests the design of the functionally gradient composite, [0/90/0/core]$_s$ cross-ply laminate, to prevent stress concentration induced from the difference of rigidity between the bone and the artificial hip joint and to reinforce the wear property of the surface and the expectation of their mechanical properties. First, the four-point bending test is done about wet bones and dry bones to know the mechanical properties of the cortical bones. In result, the wet bone shows the viscoelastic behavior and the dry bone shows the elastic behavior. Moreover, we expect the properties of the proposed gradient composites as a function of carbon fiber volume fraction in each layer to apply Halpin-Tsai equation, CLPT(classical laminate plate theory), and Bernoulli beam theory etc. and decide the thickness ratio of each lamina in order to match Young's modulus of the anisotropic cortical bone with the proposed gradient composites.

• 한국분말재료학회지
• /
• 제14권5호
• /
• pp.315-319
• /
• 2007

Pure WC or WC with low Co concentration less than 0.5 wt.% is studied to fabricate high density WC/Co cemented carbide using vacuum sintering and post HIP process. Considering the high melting point of WC, it is difficult to consolidate it without the use of Co as binder. In this study, the effect of lower Co addition on the microstructure and mechanical properties evolution of WC/CO was investigated. By HIP process after vacuum sintering, hardness and density was sharply increased. The hardness values was $2,800kgf/mm^2$ using binderless WC.