• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.278-283
• /
• 2009

The bimodal tram with a pivoting joint has difficulty in making a sharp turn because of their long body and wheel base. Therefore, applying AWS(all wheel steering) to the bimodal tram is effective to reduce the turning radius. In the present study, HILS(hardware in the loop simulation) system for the AWS ECU test was developed, which consists of the components used in real vehicles. The data obtained from the HILS system also satisfied the dynamics simulation without any error on the operation control.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.4
• /
• pp.195-203
• /
• 2017

A 2U cube satellite called SNUGLITE has been developed by GNSS Research Laboratory in Seoul National University. Its main mission is to perform actual operation by mounting dual-frequency global positioning system (GPS) receivers. Its scientific mission aims to observe space environments and collect data. It is essential for a cube satellite to control an Earth-oriented attitude for reliable and successful data transmission and reception. To this end, an attitude estimation and control algorithm, Attitude Determination and Control System (ADCS), has been implemented in the on-board computer (OBC) processor in real time. In this paper, the Extended Kalman Filter (EKF) was employed as the attitude estimation algorithm. For the attitude control technique, the Linear Quadratic Gaussian (LQG) was utilized. The algorithm was verified through the processor in the loop simulation (PILS) procedure. To validate the ADCS algorithm in the ground, the experimental verification via a single axis Hardware-in-the-loop simulation (HILS) was used due to the simplicity and cost effectiveness, rather than using the 3-axis HILS verification (Schwartz et al. 2003) with complex air-bearing mechanism design and high cost.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.713-719
• /
• 2012

This paper is concerned with the dynamic modeling for the hardware-in-the-loop simulation of lateral vibrations of a railway vehicle. The resulting dynamic model is a nine degree-of-freedom model which can describe the lateral, roll and yaw motions of the car body and two bogies. It is assumed that the external disturbances come from wheel motions. In order to test the efficacy of the model, the linear quadratic regulator and the sky-hook control algorithm were designed and applied to the model. The simulation results show that both control algorithms are effective in suppressing the vibrations of railway vehicles.

• 전자공학회논문지 IE
• /
• v.49 no.2
• /
• pp.30-39
• /
• 2012

An effective drowsy driver detection system is needed, because the probability of accident is high for drowsy driving and its severity is high at the time of accident. However, the drowsy driver detection system that uses bio-signals or vision is difficult to be utilized due to high cost. Thus, this paper proposes a drowsy driver detection algorithm by using steering angle sensor, which is attached to the most of vehicles at no additional cost, and vehicle information such as brake switch, throttle position signal, and vehicle speed. The proposed algorithm is based on jerk criterion, which is one of drowsy driver's steering patterns. In this paper, threshold value of each variable is presented and the proposed algorithm is evaluated by using acquired vehicle data from hardware in the loop simulation (HILS) through CAN communication and MATLAB program.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.35-43
• /
• 2014

The automobile industry requires technological innovations to reduce fuel consumption with the public interest in environmental conservation in recent years. Thus, the hybrid system is applied not only to passenger cars but also commercial vehicles. The purpose of this paper is to develop engine ECU_ILS to develop commercial hybrid vehicles. In order to develop the engine and vehicle, the dynamometer and exhaust gas analyzer is needed. However, a lot of time and cost are required. In contrast, the model-based development environment that can be applied to a variety of test conditions can reduce development time. Therefore, a HILS system environment that can consider the behavior of actual vehicles for evaluation of the control logic, fuel consumption and exhaust gas is required. This engine ECU_ILS system was developed in this study, can analyze parameter such as the fuel injection rate, fuel injection time, fuel consumption and exhaust gas like the actual vehicle test using map data. Also, this system is expected to be able to analyze the characteristic of vehicle behavior and the development of peripheral device in relation to engine and vehicles. This HILS system can be used to develop control strategies of commercial hybrid vehicle systems in the future.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.623-629
• /
• 2018

The acceleration and the angular velocity that include natural frequencies of a missile detected by Inertial Measurement Unit(IMU) are transmitted to the control loop of a missile. The control loop command that is calculated using above signals can cause the resonance of the missile while it flies. Hence it is common to adapt the filter and the control loop for attenuating or eliminating the undesired signals such as natural frequencies. This paper introduces the new test technique using a floating system for performance evaluation of the designed filter and the control loop prior to a flight test. The proposed scheme can check out the degradation property of vibration in the filter and the control loop, while the conventional hardware-in-the-loop simulation(HILS) scheme cannot.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2320-2322
• /
• 2004

전자제어식 미끄럼방지 제동장치 (ABS, Antilock Brake System)는 차량의 급제동시 발생할 수 있는 바퀴의 슬립을 방지하여 차량의 제동거리를 단축시키고 주행 성능을 향상시키는 차량 내 안전장치이다. 지난 몇 년 동안 공압식 제동시스템을 사용하는 대형차량에 적합한 미끄럼방지 제동 제어기를 연구해 왔다. 이 제어기는 바퀴의 슬립율과 그 변화량을 이용한 제어 법칙을 유도하여, 제어 파라미터로 사용하고 있다. 이러한 제어 파라미터의 튜닝에는 맡은 반복적인 실험이 요구된다. 이러한 요구에 부응하기 위하여 차량의 제동을 실시간으로 모사 할 수 있는 HILS (Hardware In-the Loop Simulation) 시스템을 개발, 구축하였다. 개발 HILS는 공압식 브레이크 시스템 및 14 자유도를 가지는 차량 동역학 모델 및 타이어-바퀴 동역학을 소프트웨어 모델로 사용하고, 개발 중인 전자제어식 미끄럼 방지 제동 제어기를 하드웨어로 사용하여, 바퀴속도 센서 신호 모의 장치 및 공압 엑추에이터 모의 신호등의 인터페이스 장치를 사용하여 제동중인 차량의 상태를 실시간으로 시뮬레이션 및 감시할 수 있다. 이 개발 HILS를 이용하여 제동 제어기의 제어 파라미터의 튜닝을 짧은 시간에 성공적으로 끝낼 수 있었을 뿐만 아니라, HILS 실험을 마친 제어기는 미끄럼 방지 제동 시험장에서 실차 주행 시험을 무사히 마침으로써, 개발 기간과 비용을 절감할 수 있는 하드웨어를 이용하는 시뮬레이션의 효용성을 간접적으로 증명하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.39-47
• /
• 2012

In this paper, we have developed the system of emergency vehicle preemption signal control based on UTIS(Urban Traffic Information System) which have been deployed and operated in the national capital area. It considered the turning direction(through or left turn) of emergency vehicle at the signalized intersection in order to provide the consecutive progression of emergency vehicle and minimize the control delay of passenger cars. we adopted several EVP control modes such as phase insertion and phase adjustment mode. Also, we evaluated the possibility of field implementation via simulation analysis using CORSIM RTE(Run Time Extension) based HILS(Hardware In the Loop Simulation). We expect that the result of this research contribute to providing the right-of-way to emergency vehicle in this country.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2236-2238
• /
• 2003

본 논문에서는 항공기 ABS 개발을 위한 시험용 실시간 HILS (Hardware-In-the-Loop-Simulation) 및 제어기 개발을 목적으로 하여, 설계된 ABS 제어 로직에 의해, HILS 구동 제어 결과, 제동 거리, 제동시의 압력인가, 그리고 슬립 마찰 계수와 관련한 시험 결과를 제시하였다.

• International Journal of Automotive Technology
• /
• v.7 no.3
• /
• pp.321-327
• /
• 2006

The previous paper described the logic tuning, the vehicle manufacture and the evaluation in the HILS system for the purpose of the development of a Steer-By-Wire(SBW) system. This paper describes the content of applying to a new HILS system, the vehicle manufacture and the result of the evaluation performed in Independent-type SBW(I-SBW) system. Here, the SBW indicates the method of steering both tires by using one motor as the steering gear actuator, similar to the conventional steering system. On the other hand, the I-SBW means the method of steering both front tires independently by using dual motors as the steering gear actuator. As a result, the layout and the kinematical mechanism of the I-SBW system are quite different from those of the typical steering mechanism. Nevertheless, there is no change in the steering column motor system. In the report, we first describe the structure and control logic of the I-SBW system, and then the control effect on this system as applied for both the HILS system and a vehicle. Furthermore, our HILS system involves the actuator mechanism which realizes the reaction force of the road surface with a minimized frictional force in operation. Therefore, it is possible for us to tune the control logic via the HILS system and confirm the effect of the tuned control logic by applying it to a vehicle with the I-SBW system.