• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.279-288
• /
• 2021

Low-density transplanting is a cultivation technology that reduces labor and production costs. In this study, the growth and yield of several varieties with different tillering characteristics were analyzed in order to establish an appropriate planting density for low-density transplanting. Varieties with Low-Tillering (LT), Medium-Tillering (MT), and High-Tillering (HT) were planted at a density of 37-80 hills/3.3 m². As the planting density decreased, the number of tillers per hill increased, but the number of tillers per square meter of hill decreased, especially for the LT variety. Decreasing density extended the tillering stage, which was longest in the LT variety. As the planting density decreased, SPAD(Soil plant analysis development, chlorophyll meter) values just before heading increased while canopy light interception decreased. Such changes were much greater in the LT variety than in the MT and HT varieties. The heading date tended to be delayed by 0-2 days as the planting density decreased, and there was no difference in the length of the period from first heading to full heading. As the number of spikelets per panicle increased, the number of spikelets per square meter did not differ according to the planting density. Decreasing planting density did not affect the grain weight; nevertheless, the yield ultimately decreased because of the decreasing ripening rate. The optimal planting density for stable low-density transplanting cultivation was determined to be over 50 hills/3.3 m2. In addition, these results suggest that LT varieties should be avoided, since these showed large decreases in growth and yield with decreasing planting density.

• Journal of Environmental Science International
• /
• v.21 no.11
• /
• pp.1307-1320
• /
• 2012

The purpose of this paper is to provide information on planting construction for healthy plant growth. To achieve this purpose, this study analyzed the planting type, planting density, withering rate, soil characteristics, and cambium electrical resistance (CER) of withered trees in an apartment complex with a high withering rate. The major plant groups examined consisted of native broad-leaved tree species (39.3%), native narrow-leaved tree species (24.2%), and native broad-leaved - exotic narrow-leaved tree species (16.4%). The planting density of the green area, where trees were planted from 0.0 to 0.3 trees per unit area, was measured as 98.4%. Withered trees were found in 19 of the 20 planted species, and the withering rate was 41.8% (610 withered/1,461 planted). Withering rates for tree species were measured as follows: Sophora japonica and Salix babylonica (100.0%), Magmolia denudata (84.3%), Lindera obtusiloba (74.7%), cornus kousa (69.3%), acer triflorum (69.2%), diospyros kaki (66.7%), Prunus yedoensis (62.8%), Acer palmatum (52.6%), Prunus armeniaca (51.1%), Chaenomeles sinensis (43.7%), Ginkgo biloba (40.9%), Zelkova serrata (31.0%), Cornus officinalis (28.6%), Taxus cuspidata (25.6%), Pinus densiflora (21.4%), Pinus parviflora (15.2%), Pinus strobus (14.6%), and Abies holophylla (10.3%). Soil chemical analyses for 18 samples revealed that as the withering rate increased, the following occurred: (a) the ratio of silt and clay in soil increased; (b) the soil pH, organic matter rate, nitrogen, available phosphorus, and cation exchange capacity (CEC) in samples were graded as "inadequate," based on the plant grading evaluation; and (c) the NaCl and cation exchange capacity were evaluated as "somewhat satisfactory." The measurement of CER for withering rate shows electrical resistance for higher withering rate are higher, which could predict that a tree will not grow well.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.111-115
• /
• 1973

This experiment was carried out to study the effects of planting density and amount of fertilizer applied on the morphological, physiological and physical characteristics of barley culm. The results are summarized as follows: 1. Heavy application of fertilizer increased the diameter of the inside and outside thickness of culm, dry weight per unit culm, culm length, spike weight and number of per hill. 2. Thined planting density increased lodging resistance. But lodging resistance in sparse-planted plot of$20{\times}$ 20cm was almost the same as that in the plot of $15{\times}$ 15cm. 3. In the heavy fertilized plot weight of culm at breaking, bending moment of culm atbreaking, secondary moment of inertia and section modulus increased more than those in the standard fertilized one. As a result heavy application of fertilizer gave high lodging resistance. On the other hand thined planting density increased the above-mentioned physical characters of culm. 4. In the case of dense planting lodging index became higher in standard fertilized plot, but in the case of sparse planting over 10 x 10cm there were no significant differences in lodging index as affected by amount of fertilizer applied and planting density. 5. Grain yield was increased by heavy application of fertilizer and proper planting density was $5{\times}$ 5cm or $10{\times}$10cm for the safe maximum yield.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.91-91
• /
• 2022

Popcorn grains are consumed around 10,000 tons per year, in South Korea. It is consumed in amusement parks, movie theaters and snacks. The size of the popcorn processed market in Korea is estimated to be 3.6 billon won per year. So, the popcorn grain market has good prospects. On the other hand, domestic grain is at the level of 1 %, which is less domestic production than the size of the market. Maize Research Institute has developed domestic varieties in order to increase the use of domestically produced grains. The Oyrunpopcorn variety which was commonly distributed is a preferred cultivar because it has a good popping rate compared to imported grains. In addition, 'G-Popcom', 'Oyrun #2' and 'Kichan Popcorn' were developed, which diversified the choice of the farmers. Yield per unit area is important to improve farmers' income. At present, domestic grain production is traded at 5,000 won/kg, so if the yield improves, a high farmer^ income is expected. Therefore, this study compared the growth characteristics and yield according to the appropriate sowing time and plant density to improve the yield of domestically grown popcorn. We used 'Oryunpopcorn', for this research. Agronomic characteristics were compared by sowing times April 23, May 22 and June 22. The 100 seeds weight were 15.9g, 17.7g and 15.0g, respectively. Kernel weight planted in May 22 is the highest value. Yield per 10a were 414kg, 434kg and 296kg, respectively. It shows the yield planted in May 22 was higher than other trials. Therefore, the sowing time to increase the kernel weight and yield is appropriate for planting in mid-May. The number of plants in planting density trial was 5,700 plants, 4,700 plants and 4,000 plants in 10a area. Plant height at each trial were 221 cm, 214cm and 218cm, respectively. It was the highest height in 5,700 plants trials. The 100 kernel weight were 14.8g, 15.9g and 16.5g, respectively. Low planting density trial indicated high kernel weight. Yield per 10a was 415kg, 357kg and 314kg, respectively. It was higher at high density trial than other experimental plots. Therefore, appropriate sowing time was in mid-May and planting density was 5,700 plants/10a in order to increase the yield of popcorn in South Korea. This study will be useful for farmer's income to use the domestic cultivars.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.1
• /
• pp.104-111
• /
• 1986

This study was conducted to establish the fundamental of cultivation system in southern warm region of Korea by investigation of variation of yield component and yield under the different planting density, and that was 50, 70, 90 and 110 hills per 3.3㎡. In variations of thickness of culm under the different planting densities there were more thick as decrease in density, and there were fine culm in May 20 transplanting. In Seokwang, the optimum planting density was 90 hills/3.3㎡ in May 20 and June 5 transplanting, but in June 20 and July 5, it was 110 hills/3.3㎡, then in Dongjin, the maximum grain yield was obtained on 90 hills/303㎡ in May 20, June 5, June 20 transplanting, but in July 5 transplanting the highest yield was obtained in the plot of density 110 hills/303㎡. The rate of ripened grains was higher in the high density than that of low density on the late season culture. The degeneration of primary, secondary branches and spikelets was decreased with increase in planting density, and there was more significant tendency in Seokwang than in Dongjin. The no. of panicles per m2 was increased linearly with increase in planting density, and the variation of no. of panicles per m2 according to transplanting periods was greater in Seokwang than in Dongjin.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.148-153
• /
• 2005

With the increase in the level of national income, the interest and demand of the wild edible plants have been increased. Aralia elata Seem is highlighted as a new income source for farmers in Korea. This study was conducted to determine the optimum planting density enhancing the commercial yield and quality in Aralia elata Seem. Yield of new shoots per 10a was increased in the dense planting of $1m\times30cm$ by three years of planting, but it was decreased after four years of planting, which was mainly caused by the factors such as high mortality rate. The income per 10a in the planting density of $1m\times50cm$(2,000 plants/10a) was higher by $27\%$ than that in the planting density of $1m\times30cm$(3,300 plants/10a) which was 968,00won per 10a.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.26-31
• /
• 1994

This experiment was conducted to study the effect of growth characteristics and yield by different planting density on Ligusticum chuanxiong Hort.Number of stem, leaf and branch on main stem were plant reduced by increasing the plant density. Stem height was showed the highest at $50{\times}15cm$ planting density, but diameter did not show significant difference at different planting density. Stem number in $m^2$ of field area showed negative correlation with leaf number and branch number on main stem. The height of first branched node became longer by increasing stem number, leaf number and branch number on stem in $m^2$ of field area. Rhizome yield showed negative correlation with stem number and leaf number per plant, but showed positive with stem number in $m^2$ of field area leaf number and branch number of main stem. Root and rhizome weight per plant decreased by increasing planting density, but root and rhizome yield in $m^2$ of field area were increased by high planting density.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.39-43
• /
• 1995

In the culture of Vinyl mulching and Non mulching, growth, yield, and cotton hair's growth are studied at the different planting density to get a basic material for cotton culture and high yield bumper crop in the region of the South. And the results are following. Vinyl mulching is the best one at the strength, the number of boll bearing branches, the num-ber of bolls, the number of bolls per $m^2$ and all the other characters. Vinyl mulching and Non mulching have the greatest number of bolls per $m^2$ at the planting density of 70${\times}$10cm. Vinyl mulching has the highest seed cotton yield and the highest seed cotton yield per boll. Especially when planted at the density of 70${\times}$l0cm, Vinyl mulching and Non mulching have the highest seed cotton yield. Vinyl mulching's value is accepted in fiber length and lint percentage, the wider spacing in the row is, the longer fiber length is.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.6
• /
• pp.77-83
• /
• 2001

The purpose of this study is to provide the fundamental material and information for the plant maintenance after rooftop planting through physiochemical characteristics. The characteristics of artificial soils after rooftop planting from 1993 to 1999 was investigated. Fourteen investigation areas were selected from 4 cities(2 areas selected by each year). The analysis of the circumstances of the areas, the physical characteristics, and the chemical characteristics of the soil were conducted. The artificial soil pH ranged 5.26∼7.40 showing that after construction the soil pH tended to decrease. The soil bulk density of the site was lowest in 1999, 0.15g/㎤, and used to increase toward 1993. We found the fact that the soil bulk density increased gradually after rooftop application . The coefficients of permeability of the soils range from 0.016 to 0.052 cm/sec, which seemed to be in good permeability level. The artificial soils had relatively high water moisture capacity of 62.69∼71.36%. The soil organic matter content of the artificial soils ranged from 0.43 to 1.34%. The exchangeable caution concentration in the artificial soil ranged, Na, 2.36∼4.71mg·{TEX}$kg^{-1}${/TEX}, Mg 0.88∼2.84mg·{TEX}$kg^{-1}${/TEX},K 2.97∼9.61 mg·{TEX}$kg^{-1}${/TEX}, and Ca 9.39∼28.23 mg·{TEX}$kg^{-1}${/TEX}. The amount of total N ranged from 0.003 to 0.286% in study sites. Soil chemical properties varied year to year and showed little tend. The research results showed that some characteristics of the artificial soil were changed after rooftop planting, i.e., soil pH and soil bulk density. Soil bulk density had a negative relationship with the coefficient of permeability, showing that the drainage condition might be limited after some period. This study suggests that a diversity of the research in the changes of the plant growth basis on the areas after construction.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.390-399
• /
• 2020

We investigated the effect of seedling age and planting density on early growth performance of Zelkova serrata trees. Containerized Z. serrata seedlings, 1-year-old and 2-year-old, were planted according to two different planting densities (3,000 and 5,000 trees ha-1) at the end of March, 2017. Three plots were established for each treatment (2 seedling ages × 2 planting densities). We calculated the survival rate (%) of out-planted seedlings as well as the stem volume based on the root collar diameter (RCD) and height (H) in September of each year, from 2017 to 2019. Seedling age and planting density did not affect survival rate of the out-planted trees. Planting density did not affect height of the trees, whereas the treatment significantly affected RCD and the H/D ratio for 2-year-old seedlings in 2019. The stem volume per tree was highest in the plot of 2-year-old seedlings at 5,000 trees ha-1 and lowest in the 1-year-old seedlings at 3,000 trees ha-1. In addition, the tree height in both 1-year-old and 2-year-old Z. serrata trees was greater in the 5,000 trees ha-1 plot than in the 3,000 trees ha-1 plot. There was no interactive effect between seedling age and planting density on stem volume; however, as seedling age and planting density increased, stem volume of Z. serrata trees increased. The values for stem volume per hectare are 85%, 68%, and 300% higher in 1-year-old 5,000 trees ha-1, 2-year-old 3,000 trees ha-1, and 2-year-old 5,000 trees ha-1 plots, respectively, compared to the values in 1-year-old 3,000 trees ha-1. This result shows that high planting density (close planting) affects tree growth differently based on seedling age, and suggests that the planting density of 5,000 trees ha-1 is suitable for 2-year-old seedlings to improve early growth field performance.