• 전기학회논문지
• /
• 제57권3호
• /
• pp.336-343
• /
• 2008

In this study, a transition of power quality was characterized by non-linear voltage electric equipments under voltage sag. The test was inputted voltage sag to IPC(Sag Generator) from AVR, and then to equipments by IPC which adjust voltage magnitude and duration. The load test which non-linear voltage electric equipments used PLC, Magnetic Contactor, SMPS, HID Lamp. The test result was different from each other according to a manufacturing companys, models, and equipments. PLC was greatly described to be stabilized voltage sag in case of no load then rated load. Magnetic Contactor was made a difference to phase angles on voltage sag, which was $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. HPD Lamp was described to be stabilized the sodium lamp, and to be unstabilized the metal hailed lamp. The test result was showed CBEMA curve that stand for evaluated responsiveness of voltage sag. This study was tested description to dynamic characteristics on non-linear voltage electric equipment under voltage sag. There was hoped that power system designed the essential particulars.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2262-2267
• /
• 2010

In order to analyze the reason of wall blackening, which affect the decline of lifetime in a ceramic metal halide lamp, we carried out the deterioration of ceramic tubes by a change in operating conditions with arc tubes of two types of spherical and cylindrical, and we have confirmed the cause of wall blackening through the analysis of element composition and spectrum from SEM/EDS and spectrum analyzer. Wall blackening of tungsten was shown by sputtering from ignition in 20 minute on/off condition and wall blackening from chemical reaction between PCA wall and rare earth halides was shown significantly in a condition without on/off test. Especially, the wall blackening and the decline of luminous flux were reduced by inner convection in spherical type arc tube. Moreover, the color temperature and color coordinate were changed by reduction of emission spectrum of Dy which causes the chemical reaction with PCA wall.

• 조명전기설비학회논문지
• /
• 제16권1호
• /
• pp.20-26
• /
• 2002

고압방전램프에는 고압수은램프, 고압나트륨램프와 메탈핼라이프램프가 있다. 메탈핼라이드램프는 가장 효율 좋을 램프들 중 하나이며 고효율, 고연색성과 집광능력이 좋다. 이 연구의 목적은 AC 100∼277의 프리볼트입력용 전자식안정기를 개발하여 메탈핼라이드(MH70W)를 점등시키는 것이다. 개발된 전자식안정기는 프리볼트입력용컨버터, 플라이백컨버터와 하프브리지인버터, 이그나이터와 보호기 그리고 제어기로 구성되어 있다. 실험 결과 개발된 전자식안정기는 프리볼트입력(AC 100∼277V)에 따라 메탈핼라이드램프(MH70W)가 매우 잘 점등되었다.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.996-1001
• /
• 2010

Recently, the demand of ceramic metal halide lamp has been expanded. Therefore, the lamp with high efficiency and long lifetime are increasing and the evaluation of reliability is needed. In this paper, the degradation phenomena of ceramic metal halide lamp was studied. The lamp was tested for 3000 on/off cycles with each cycle having a duration of 20 minutes on and 20 minutes off based on the accelerated aging experiment based on "Reliability Standards RS C 0085". As result, the corrosion of arc tube and leak was appeared from reaction between inner wall of PCA and chemical elements, and distortion of electrode was resulted from difference of thermal expansion between arc tube of PCA and electrode. Also, the efficiency of lamp was decreased by the change of inner pressure, operation temperature, and driving voltage from wall blackening.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.451-460
• /
• 2010

This paper presents a new kind of digital control metal halide lamp electronic ballast. A zero-voltage-switch quasi-square-wave (ZVS-QSW) dual Buck converter is adopted here. In this paper, a digital control method is proposed to achieve ZVS for the converter. This ZVS can be realized during the whole working condition. Single-cycle-peak-current control is proposed to solve the problem of excessive inductor current during a low-frequency reversal transient. Power loop control is also realized and its consistency for different lamps is good. An AVR special microcontroller for a HID ballast is used to raise the control performance, and the low-frequency square-wave control method is adopted to avoid acoustic resonance. A 70W prototype was built in the laboratory. Experimental results show that the electronic ballast works reliably. Furthermore, the efficiency of the ballast can be higher than 92%.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.79-85
• /
• 2016

In this study, we proposed a new single-stage small power MH lamp electronic ballast and power-factor correction circuit with improved circuit by the current of passive power factor correction. Main circuit integrates traditional DC/DC and DC/AC circuits into one-stage DC/AC inverter. Moreover, we described the working principle and control strategy of the new circuit; it's soft switching principle; and resonant element parameter design formula. An experimental prototype of HID lamp electronic ballast with output power of 70 W was built to verify the feasibility of the analysis and design. The simulation and experimental results proved that the power factor of this circuit could reach 94%, with efficiency of 90%. The input current harmonics conform to IEC 61000-3-2 standards and its cost is low. These superior performances of the new circuit indicate certain practical values.

• Animal cells and systems
• /
• 제11권2호
• /
• pp.183-189
• /
• 2007

To investigate the properties of mucosubstances of the epidermis in various teleostean species, conventional histochemical stainings were used on the skin in five species of order Perciformes, i. e., yellowtail, Seriota quinqueradiat, striped beakperch, Oplegnathus fasciatus, brown spotted grouper, Epinephelus chlorostigma, sea chub, Ditrema temmincki and multicolorfin rainbowfish, Halichoeres poecilopterus. The following methods were used: periodic acid Schiff (PAS), alcian blue (AB) pH at 2.5, AB pH at 1.0, AB pH at 2.5-PAS, AB pH at 1.0-PAS, aldehyde fuchsin (AF) pH at 1.7-AB pH at 2.5 and high iron diamine (HID)-AB pH at 2.5. The epidermis of all five species consisted of three layers: superficial, middle, and basal layer. The superficial layer was comprised of rather flattened cells. In particular, the outermost layer of striped beakperch and middle layer of sea chub consisted of mucus-secreting cells. Mucous cells, the unicellular glands, were found in epidermis but varied in number in different body regions and species. Although there was a slight difference in the amount in various species and body regions, the secretory contents of the mucous cells in the five teleostean species contained acidic mucopolysaccharides. In yellowtail, striped beakperch, and multicolorfin rainbowfish, the property of mucosubstances was identified as sialomucin, while it was sulphomucin in brown spotted grouper and sea chub.

• The Korean Journal of Ecology
• /
• 제6권2호
• /
• pp.106-113
• /
• 1983

The growth of Korean axolotl., Hynobius leechii, was analyzed in natural water as control group and in six copper ion groups contaminated by 0.1, 0.2, 0.3, 0.4, 0.5, 0.6 ppm of copper ion. The copper ion checks the growth of the axolotl. The axolotl was not survived during 30 days in the copper ion of 0.3ppm, and, in the 0.4ppm the axolotl was not survived during 10 days after hatch. The growth of head width and body length show a convexing increase pattern, while that of hind leg shows a concaving increase pattern. The copper ion checks the development of hind leg. In the growth quantity of head width, body length and hid leg, that of natural water show the most rapid increase pattern, and copper ion groups of 0.1, 0.2, 0.3ppm follow in that order. The coefficient of relative growth($\alpha$) of control group is the greater value, and the copper ion groups of 0.1, 0.2, 0.3ppm follow in that order. The contaminated groups show the negative allometry in the relative growth of the containated groups to the natural water. Body length shows positive allometry, while hind leg shows negative allometry in the relative growth to head width.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1005-1006
• /
• 2008

기존의 전자식 안정기 특히 펄스로 시동되는 HID램프용의 안정기에서는 부가적인 시동회로가 필요하게 된다. 하지만 램프 제조업자에 의해 규정된 점화 펄스폭은 제조업자 간에서도 다양하며, 대단히 높게 되어 있으며 그 펄스폭에는 최소 필요한 값이 있고 이것은 통상 $1.5{\sim}2.5us$정도이다. 이와 같은 시동 펄스폭의 조건을 만족하기 위해서는 시동회로 또한 복잡해지고 제작비용도 고가가 된다. 본 연구는 전력소모가 20[%]이상 절감되면서도 광량이 더 많이 방사되는 메탈핼라이드 램프를 UV경화 시스템 즉, LCD, PDP OLED 모듈조립, 평면, 곡면 스크린 인쇄용, 코팅용, 실험용 UV경화 및 UV노광 시스템 등에 사용 가능한 전자식 안정기를 고주파 시동의 이점을 유지해 가면서 지연 시간에 기인하는 램프의 꺼짐 및 대순환 전류의 문제를 해소하고 고압 대용량 램프를 구동할 수 있는 20KW급 전자식 안정기를 제안하여 22KW UV LAMP를 사용하여 전자식 안정기를 구동 실험으로 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1890-1892
• /
• 2002

The technology of sulfur lamps that has physical and electrical characteristics comparable to current HID source has been reported. The fundamental principles of the operation of microwave discharges that are used to convert microwave energy to broad spectrum visual light are known. In this paper, emission dependance of microwave discharges in mixture content of sulfur with noble gases was studied. It is shown that the excitation of this gaseous mixture is carried out in two phases: (l) ionization of noble gas atoms by a microwave field and (2) the consequent maintenance of slightly ionized nonequilibrium plasma by the field. These two processes have essentially various thresholds for the microwave pump. The purpose of this work is to investigate spectral properties of the high frequency discharges in a mixture sulfur vapors with noble gases.