• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.1
• /
• pp.43-53
• /
• 2019

In the Geumho River, 4-nitrophenol has been detected, thus it is necessary to investigate the contamination sources in order to prevent the release of this compound. However, the research to estimate the potential source is regarded as complicated research. In this study, the distributions of 4-nitrophenol were simulated and the contribution of the potential sources was estimated using a numerical model(HydroGeoSphere; HGS) and the measuring data of 4-nitrophenol from 2013 to 2017. The altitude data, the land cover data, the flow rates of the tributaries and wastewater treatment plants, and the decay rate of 4-nitrophenol was used as the input data. The results of this research showed that the contribution rates of potential contamination sources in the upstream area were higher than that of the downstream area. Most of the upstream area is the agricultural area, it seemed that 4-nitrophenol was originated from the pesticides. In order to achieve more specific location of sources, an intensive investigation in the upstream is required.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.285-285
• /
• 2020

본 연구에서는 국내 시설농업단지의 수리지질 특성을 고려한 개념 모델을 설정하여 수리전도도와 이격거리(주입정과 양수정 사이의 거리)에 대한 민감도 분석을 수행하였다. 개념 모델에는 자연적 특성(지형과 지질, 강수량, 수리전도도 등)과 인공적 특성(주입정과 양수정의 이격거리, 주입량과 양수량 등)이 입력되었으며, 민감도 분석은 수리전도도(10^-1 cm/sec, 10^-2 cm/sec, 10^-3 cm/sec, 10^-4 cm/sec)와 이격거리(10 m, 50 m, 100 m)를 조합한 12개의 시나리오로 수행하였다. 양수정의 하류부에 설정된 관측정의 지하수위 강하량은 수리전도도가 감소하고 이격거리가 멀어질수록 증가하였다. 동일한 이격거리에서 수리전도도에 의한 지하수위 강하량의 회귀분석을 통해 인공함양 대수층의 지하수위 변동은 수리전도도에 의해 지배적인 영향을 받음을 알 수 있었다. 인공함양 대수층의 수리전도도가 10^-2 cm/sec 이상인 조건에서는 주입정과 양수정의 이격거리에 따른 지하수위의 영향반경은 20 m 이내이었지만, 수리전도도가 10^-3 cm/sec 이하인 조건에서는 이격거리가 멀어질수록 지하수위의 영향반경이 급격하게 증가함을 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.213-217
• /
• 1996

HgS and HgS: Co crystals and films grown by the slow cooling and the chemical bath deposition method were used to measure their crystal structure and their optical absorption spectra. HgS and HgS: Co crystals are hexagonal structure with the lattice constant $a_0=4.155{\AA}$, $c_0=9.505{\AA}$ for HgS and $a_0=4.148{\AA}$, $c_0=9.462{\AA}$ for HgS and $a_0=4.135{\AA}$, $c_0=9.442{\AA}$ for HgS: Co, respectively. The optical energy gap of these crystals are given as 2.040 eV for HgS and 1.900 eV for HgS: Co, and the optical energy gap of these films were 2.440 eV for HgS and 1.940 eV for HgS: Co at room temperature, respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.2
• /
• pp.257-266
• /
• 1998

This study was conducted to examine the changes of the mechanical properties of the position in jean slacks during the wear, previously used for the wearing test, which were subjected to repeated tensile-shearing deformation using a simulated fatigue tester has been investigated and compared, by calculating both mechanical properties and hand value(HV) of these fabrics with KES-F system and the by obtaining the THV through these calculated properties. The results are as follows. 1. The fatigue phenomenon of mechanical properties was the LT, 2H B, 2HBS, MMD, SMD, RC values increased, elasticity values of tensile, bending and shearing properties, such as B, G and compression properties LC, WC were reduced. It was shown, then, that those fabrics lost their elasticity and became flexible and soft with the increase of fatigue. 2. The hand value and THV; except anterior knee from all part of KOSHI, NUMERI, FUKURAMI was decreased. 3. The fatigue phenomenon of hand value was different on the position of clothing; on the position of hip, rate of B, G smaller than other parts and KOSHI was decreased, on the part of anterior thigh was FUKURAMI was increased, on the anterior knee RC, NUMERI, THV was increased, on the posterior knee was 2HB, 2HG, 2HGS showed increasedgreater than any other part and on the hem of back, MMD was increased, but NUMERI was decreased. 4. The changing process of mechanical properties in the simulation testing by the fatigue tester has similar tendency to that of the wearing tester. It is concluded that this testing method is useful to predict the fatigue phenomena of fabrics caused by wearing.

• Applied Microscopy
• /
• v.36 no.4
• /
• pp.259-269
• /
• 2006

Hemocytes of the spider Araneus ventricosus were investigated with histochemistry, density analysis of percoll gradient, and fine structural examinations using transmission electron microscope. The hemocytes of this spider were classified into two major groups: granulocytes and non-granulocytes. The granular hemocytes were subdivided into three subtypes according to their histochemical properties which are eosinophilic granuloctes(EGs), basophilic granulocytes(BGs) and cyanocytes. The EGs, which have small granules within the cytoplasm comprise about 5% of the total henocytes. However the granules of BGs are larger than those of HGs. The cyanocytes were characterized to contain hemocyanin granules in their cytoplasm. On the other hand, the non-granulocytes were divided into three subtypes; hyaline leucocytes, oenocytoids, and molting homocytes. The hyaline leucocytes are the most abundant and the smallest hemocyte type in this spider. The oenocytoids that have $10{\sim}15{\mu}m$ in diameter are mostly found at the marginal region of the myocardium in the heart tube. The molting hemocytes, which only appeared during the molting period, contains plenty of glycogen particles in their cytoplasm.

• Animal cells and systems
• /
• v.10 no.4
• /
• pp.227-231
• /
• 2006

Micro-deletions at specific loci of the Y chromosome have been observed frequently in male infertility patients, suggesting that genes in these regions are involved in male germ cell development. DAZ is a representative male infertility gene at the AZFc locus of the Y chromosome. Since DAZ contains an RNA binding motif along with so-called a DAZ domain, it was proposed to participate in RNA metabolism during spermatogenesis. A mouse gene homologous to the human DAZ gene has been cloned and named Dazl (DAZlike). Dazl is autosomal and expressed in the testis and also at a low level in the ovary. Male mice homozygous for the Dazl null allele have small testes with a few spermatogonia and almost complete absence of germ cells beyond the spermatogonial stage, suggesting the requirement of Dazl for entry or progression through meiosis. However, its exact cellular functions have not been understood yet. In order to investigate cellular functions of Dazl, we decided to isolate candidate interacting protein genes of the mouse Dazl, using yeast two-hybrid screening. A number of candidate Dazlinteracting proteins have been isolated, such as Bprp, Acf, Hgs, Murr1, Nbak3 and Ranbp9, but dynein light chain 1 (Dlc1) was most predominant. A strong interaction of Dazl with Dlc1 suggests that Dazl might function as an mRNA adaptor to the dynein motor complex.

• Textile Coloration and Finishing
• /
• v.8 no.5
• /
• pp.7-16
• /
• 1996

The air-flow dyeing machine is a new type of dyeing machine. Which is an energy saving type to be able to dye the fabrics with the lowest liquor ratio and in shorter time. This machine is operated with an aerodynamic system rather than a hyd raulic system for traditional jet or overflow dyeing. An air-flow dyeing machine(Green-flow) by the use of aerodynamic technology was developed and compared with the Luft-roto machine made by Thies Company, Germany, in this study. Three samples were dyed with both machines under the same dyeing conditions and color fastness, dyeing levelness, drapability, and mechanical properties of these samples were compared. The results were as follows; Both machines have almost the same dyeability. The dyeability was good at liquor ratio of 1: 3.5 and the speed of 450yds/min. The order for drapability was Crepe de Chine > Cool Peach > Charmeuse. Except for the color fastness of sublimation being below class 4, most color fastness of samples dyed with Green-flow m/c were above class 4. The maximum speed was 510yds/min. for Crepe de Chine and the standard deviation of K/S value was lower for Charmeuse and Cool Peach when employed on the "Green-flow" machine and lower for Crepe de Chine when employed on the Luft-roto machine. Comparing with dyeing of the Green-flow machine and that of the Luft-roto machine, the RT of the Charmeuse was found to be higher with the Green-flow machine and thus the sample had an improved wrinkle recovery. LT and WT of Cool Peach were higher, and shear properties(G, 2HG, 2HGS) of Crepe de Chine were higher, both turning out as suitable for clothing. clothing.

• Journal of The Korean Society of Integrative Medicine
• /
• v.11 no.2
• /
• pp.49-60
• /
• 2023

Purpose : We aimed to evaluate the impact of a exercise with kinect-based mixed reality device (KMR) on physical function, upper extremity disability, fatigue, and quality of life in breast cancer survivors. We hypothesized that this exercise program would improve physical function, physical activity, fatigue, and quality of life. Methods : Thirty-nine breast cancer survivors were randomized to either the KMR exercise group (KE) or the home stretch group (HS). The KE participated in 8 weeks of exercise, exercising 3 times per week, while the HS performed 8 weeks of stretching exercises, also 3 times per week. Before and after the intervention period, participants underwent assessments of physical function, including body composition, chester step test (CST), and hand grip strength (HGS). Additionally, participants completed questionnaires including the international physical activity questionnaire (IPAQ), disabilities of the arm, shoulder and hand (DASH) questionnaire, and functional assessment of cancer therapy-breast (FACT-B) questionnaire to measure their physical activity levels, upper extremity disability, and quality of life, respectively. Results : Overall, significant improvements were observed in several shoulder movements, body weight, and physical activity, with no significant interaction effects between groups and time. Furthermore, there was a significant group by time interaction for body weight, left flexion, right flexion, right abduction, and left adduction, as well as for upper extremity disability (K-DASH) and quality of life (FACT-B). Conclusion : In conclusion, the KMR exercise program was found to be effective at improving physical function, upper extremity disability, quality of life, and overall well-being in breast cancer survivors. The significant improvements observed in multiple measures and the significant group by time interactions for various outcomes highlight the potential benefits of this KMR exercise program in promoting a better quality of life for breast cancer survivors.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.327-334
• /
• 1997

The purpose of this study was to evaluate clinical applicability of light cured glass ionomer cement as a othodontic adhesive. The metal brackets and plastic brackets were bonded with light cured glass ionomer cement(Fuji Ortho $LS^{(R)}$) after polishing with a slurry of pumice, surface conditioning with 10% polyacrylic acid and chemically cured resin(Mono-$Lok2^{(R)}$) after acid etching with 38% phosphoric acid on the extracted human bicuspids. The shear bond strength was tested with a universal testing machine(HGS-100A, Shimadzu Co., Japan) after storage in normal saline at $37^{\circ}C$ or 24 hours and 48 hours. The results were as follows: 1. The shear bond strength of light cured glass ionomer cement group polished with a slurry of pumice was significantly lower than that of chemically cured resin group(P<0.01). 2. The shear bond strength of light cured glass ionomer cement group conditioned with 10% polyacrylic acid was significantly lower than that of chemically cured resin group(P<0.01). 3. The shear bond strength of light cued glass ionorner cement group conditioned with 10% polyacrylic acid was slightly higher than that of light cured glass ionomer cement group polished with a slurry of pumice, but there was no significant difference(P>0.05). 4. There was no significant difference between metal bracket group and plastic bracket group irrelevant off enamel conditioning(P>005). In summary, although the shear bond strength of light cured glass lionomer cement was lower than that of chemically cured resin, it night be clinically applicable.

• Korean Journal of Environmental Biology
• /
• v.29 no.4
• /
• pp.353-361
• /
• 2011

This study was conducted to examine the effects of sedimentation caused by highland agriculture on benthic macroinvertbrate assemblages in upper Song Stream from 2006 to 2009. The mean concentrations of water quality parameters (pH, DO, EC, TDS, TN, and TP) were gradually increasing toward downstream but ORP was decreased. Furthermore, biological habitats at lower reaches were more homogeneous and unstable due to sand deposition than those at upper sites. A total 106 species of benthic macroinvertbrates in 47 families, 11 orders, 6 classes, and 5 phyla were identified during whole field surveys. Song Stream showed great declines of overall biological attributes along its longitudinal gradients, particularly in taxa richness and abundance. Of all functional groups scrapers and clingers were most affected against the degradation of habitat quality, whereas collector-gatherers and burrowers showed the opposite case. It was found that such results had close correlations with water quality parameters and substrate composition which played an important role in structuring macroinvertebrate communities. In conclusion, this study represents that disturbance caused by highland agricultural activities had negative effects on benthic macroinvertebrate communities by leading to sand deposition at adjacent stream ecosystems.