• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.353-356
• /
• 2008

HEV(Hybrid Electrical Vehicle) is considered as one of the next generation vehicles. To develop the HEV, there must be a reliable simulator, by which the capacities of the power resources are tested, and the parameters of the HEV are optimized before developing the real model of the HEVs. This process can save the money for designing the HEV system and improve the system without experiments. Matlab Simulink is familiar to mechanical engineers and the program can simultaneously provide a system model and a controller in one program. Nowadays, the Simdriveline toolbox which is used for analysis a power-train system is applied to build a dynamic model for a HEV system. In this study, we make a HEV simulator with the Simdriveline toolbox and develop a controller. There are two simple strategies, applied to the controller. One strategy includes a power split ratio and a shift map which are created by user. Other strategy calculated an appropriate amount of resource's torque along specific results, and this is useful when users can't develop a fitting controller. The methodologies for configuring the simulator and its control system are presented in this paper.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.174-182
• /
• 2014

Recently, not only common types of hybrid electric vehicle (HEV) such as series or parallel but many other types of HEVs including 4WD hybrid electric vehicle have been developed and released. In this study, analysis of fuel economy and driving performance for 2WD and 4WD HEV are conducted using backward simulation based on dynamic programming. To analyze the characteristics of 4WD HEV, tire slip model based on vehicle dynamics was applied to the backward simulation program. As a result, 2WD HEV shows better fuel economy than 4WD HEV because of relatively simple configuration. However, in a severe road condition, 4WD HEV shows better driving performance that 2WD HEV had about 6% of impossible time to follow the driving cycle though the 4WD HEV had no impossible time.

• New & Renewable Energy
• /
• v.4 no.4
• /
• pp.65-71
• /
• 2008

Considering the world's environmental problem, HEVs are projected as one of the solution. The keys of the HEV cruise control are expanding the use of electric motor and operating the internal combustion engine in the efficient region. This paper presents a new structure of SOC sustaining model where state-machine control is used. The proposed model defines battery charging and discharging as states and SOC of the battery as control variables. In this paper, we introduce various methods in deterministic rule-based control for HEV and describe a new SOC sustaining controller used by state-machine.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.554-555
• /
• 2010

HEV 운전특성 연구를 위한 시뮬레이터에 사용되는 HEV 구성요소들의 모델링은, 연구 목적에 따라 크게 정상상태 모델과 동적모델로 분류할 수 있다. 정상상태 모델이 시스템의 구조해석과 포괄적인 운전전략에 관한 툴이라면 동적모델은 각 구성요소의 특성과 손실에 관하여 더 자세한 정보를 제공한다. 본 논문은 HEV 운전 특성 분석을 위한 시뮬레이터에 사용하기 위한, Energy-based system model을 기반으로 한 정상상태 모델과 동적 모델을 제안한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.121-128
• /
• 2002

In this paper, the fuel economy of plug-in type hybrid electric vehicle is investigated through simulation. For the simulation study, 2 shaft type parallel hybrid powertrain is chosen and its operation modes are described. The operation algorithm which yields operation points of minimal fuel cost is suggested. Dynamic model fur operation of HEV and simulation procedure is described. Simulation results of fuel economy is compared to non plug-in type HEV as well as conventional vehicle. With total driving distance of 37km and full usage of 2kwh of electric energy stored in battery pack, plug-in type HEV shows 28-30% improved fuel economy compared to non plug-in type HEV and 86-93% improved fuel economy compared to conventional vehicle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.65-73
• /
• 2008

The purpose of this study is development of universal engine model for integrated Hybrid Electric Vehicle (HEV) simulator and a optimization of engine model. The engine model of this study is based on the MATLAB Simulink for universal and include engine fuel economy technologies for HEV. Various engine fuel economy technologies for HEV is estimated by commercial engine 1-D simulation program - WAVE. And, the 1-D simulation model of base version is compared with engine experiment result. The analyzed engine technologies with 1-D simulation are Dual-CVVT, Atkinson-Cycle and Cylinder-Deactivation System. There are improvement of fuel economy and power performance with Dual-CVVT model at part load and full load, pumping loss reduction with Cylinder-Deactivation System at idle and regeneration. Each estimated technologies are analyzed by 1-D simulation on all operation region for base data to converse simulink. The simulink based engine model maintains a signal with ECU for determination of engine operation point.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.523-531
• /
• 2014

Brushless Dual-Mechanical-Port Electrical Machine (BLDMPEM) is a new type of motor designed for Hybrid Electric Vehicle (HEV), which contains two mechanical ports and two electric ports. Compared with Dual-Mechanical-Port Electrical Machine (DMPEM), the brushless structure brings higher reliability and easier maintenance. In this paper, the model of BLDMPEM is discussed. In Chapter 2, the energy flow and mathematical model of BLDMPEM are analyzed. Then a novel three-phase half-bridge controlled rectifier topology and its control strategy for cruising mode of HEV based on BLDMPEM are proposed in Chapter 3. Compared with the Field Oriented Control (FOC) strategy of BLDMPEM, the proposed method does not require accurate motor parameters, and it is much simpler and easier to be implemented. At last, simulation and experiment results show the feasibility and validity of the proposed strategy.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.6
• /
• pp.532-538
• /
• 2012

This paper proposes the Mathematical Modeling for HEV High-power Lithium-Polymer Battery. The nonlinear system of the Lithium Battery electrical characteristic express mathematical state equation. We also test charge/discharge and temperature experimental used to identify parameters of the cell find parameter of the least error. The proposed model experimental results is used with battery cycler to verify of the proposed model.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.562-564
• /
• 2005

This paper presents the reasonable design parameters of a SRM for hybrid electric vehicle driving. For the design of SRM, the initial model is designed using the equivalent magnetic circuit method. In order to optimize the SRM for HEV. The initial model is redesigned by FEM with the variation of the stock length and turns of winding. This paper shows that a flat-topped current of a phase can be made from a change of the stack length and the number of turns for high efficiency, high average torque and a lower torque ripple. The change of current falling time as a variation of turn-off angle was shown by FEA. The iron loss and copper loss were described. The torque of the redesigned motor is suitable for low and high speed ranges to drive a HEV that was verified by the speed-torque curve.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1141-1143
• /
• 2005

This paper presents the reasonable design parameters of a SRM for hybrid electric vehicle driving. For the design of SRM, the initial model is designed using the equivalent magnetic circuit method. In order to optimize the SRM for HEV. The initial model is redesigned by FEM with the variation of the stock length and turns of winding. This paper shows that a flat-topped current of a phase can be made from a change of the stack length and the number of turns for high efficiency, high average torque and a lower torque ripple. The change of current falling time as a variation of turn-off angle was shown by FEA. The iron loss and copper loss were described. The torque of the redesigned motor is suitable for low and high speed ranges to drive a HEV that was verified by the speed-torque curve.