• MALSORI
• /
• no.27_28
• /
• pp.27-56
• /
• 1994

Processes involving the change of vowel height are natural enough to be found in many languages. It is essential to have a better feature specification for vowel height to grasp these processes properly, Standard Phonology adopts the binary feature system, and vowel height is represented by the two features, i.e., [\pm high] and [\pm low]. This has its own merits. But it is defective because it is misleading when we count the number of features used in a rule to compare the naturalness of rules. This feature system also cannot represent more than three degrees of height, We wi31 discard the binary features for vowel height. We consider to adopt the multivalued feature [n high] for the property of height. However, this feature cannot avoid the arbitrariness resulting from the number values denoting vowel height. It is not easy to expect whether the number in question is the largest or not It also is impossible to decide whether a larger number denotes a higher vowel or a lower vowel. Furthermore this feature specification requires an ad hoc condition such as n > 3 or n \geq 2, whenever we want to refer to a natural class including more than one degree of height The altelnative might be Particle Phonology, or Dependency Phonology. These might be apt for multivalued vowel height systems, as their supporters argue. However, the feature specification of Particle Phonology will be discarded because it does not observe strictly the assumption that the number of the particle a is decisive in representing the height. One a in a representation can denote variant degrees of height such as [e], [I], [a], [a ] and [e ]. This also means that we cannot represent natural classes in terms of the number of the particle a, Dependency Phonology also has problems in specifying a degree of vowel height by the dependency relations between the elements. There is no unique element to represent vowel height since every property has to be defined in terms of the dependency relations between two or more elements, As a result it is difficult to formulate a rule for vowel height change, especially when the phenomenon involves a chain of vowel shifts. Therefore, we suggest a new feature specification for vowel height (see Chapter 3). This specification resorts to a single feature H and a few >'s which refer exclusively to the degree of the tongue height when a vowel is pronounced. It can cope with more than three degrees of height because it is fundamentally a multivalued scalar feature. This feature also obviates the ad hoc condition for a natural class while the [n high] type of multivalued feature suffers from it. Also this feature specification conforms to our expection that the notation should become simpler as the generality of the class increases, in that the fewer angled brackets are used, the more vowels are included, Incidentally, it has also to be noted that, by adopting a single feature for vowel height, it is possible to formulate a simpler version of rules involving the changes of vowel height especially when they involve vowel shifts found in many languages.

• Journal of Environmental Science International
• /
• v.23 no.3
• /
• pp.459-472
• /
• 2014

Storm surge height in the coastal area of Jeju Island was examined using the Princeton Ocean Model(POM) with a sigma coordinate system. Amongst the typhoons that had affected to Jeju Island for six years(1987 to 2003), the eight typhoons(Maemi, Rusa, Prapiroon, Olga, Yanni, Janis, Gladys and Thelma) were found to bring relatively huge damage. The storm surge height of these typhoons simulated in Jeju harbour and Seogwipo harbour corresponded relatively well with the observed value. The occurrence time of the storm surge height was different, but mostly, it was a little later than the observed time. Jeju harbour showed a higher storm surge height than Seogwipo harbour, and the storm surge height didn't exceed 1m in both of Jeju harbour and Seogwipo harbour. Maemi out of the eight typhoons showed the maximum storm surge height(77.97 cm) in Jeju harbour, and Janis showed the lowest storm surge height(5.3 cm) in Seogwipo harbour.

• Tribology and Lubricants
• /
• v.19 no.2
• /
• pp.102-108
• /
• 2003

The height of laser bumps has been considered as the limit of the minimum flying height in the contact start-stop (CSS) of hard disk drives. In this paper, tribological interactions at flying height under laser bumps are investigated in a spin stand for development of ultra-low flying head-disk interface. With the reduction of the spinning speed in a spin stand, the flying height is decreased under the height of laser bumps and, then, head-disk interactions are investigated using AE and stiction/friction signals. During seek tests and 20000 cycle-sweep tests, AE and stiction/friction signals are not significantly changed and there are no catastrophic failures of head-disk interface. Bearing analysis and AFM analysis show that there are signs of wear and plastic deformation on the disks. It is suggested that flying height could be as low as and, sometimes, lower than laser bump height.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.197-205
• /
• 2011

Various jumping and landing motions are shown during sports event. But most previous studies have not considered landing height and distance simultaneously. The purpose of this study was to identify the effects of landing height and distance on knee injury mechanism. Fourteen male(age: $28.86{\pm}1.99$ yrs, height: $177.00{\pm}4.69$ cm, weight: $76.50{\pm}6.41$ kg) participated in this study. The subjects attempted drop landing task onto the ground from 30 cm to 45 cm heights and to 20 cm to 40 cm distances. The results were as follows. First, higher drop landing height and longer distance showed greater degree of maximal knee flexion and valgus. Second, higher drop landing height and longer distance showed greater maximal knee extension moment and varus moment. Third, higher drop landing height and longer distance showed larger maximal knee absorption power. Lastly, higher drop landing height showed increased Peak GRF. Landing height was more related to the cause of injury, which was indicated by increased maximal knee extension moment, peak GRF and maximal knee absorption power. Landing distance was also associated with increased knee valgus moment and absorption power during landing. These results suggest that landing height and distance may be the cause of injury.

• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.30-37
• /
• 2012

Effect of rib heights is found as significant parameter to enhance convective heat transfer performance under laminar and low turbulent regime. Circular ribs with different ribheight to channel height ratios, e/H = 0.05, 0.1, 0.15, are fabricated over the copper substrate respectively in a rectangular duct having 7.5 cross sectional aspect ratio. Only one rib pitch to rib height ratio (P/e = 10) has been chosen for all different height ribs. The result shows that the arithmetic average of turbulence intensity decreases with decreasing roughness height calculated between two ribs under laminar and low turbulent region. It occurs because the area of recirculation and reattachment zone also decreases with decreasing rib height. Optimum thermal enhancement factor is derived by 0.1 rib height to channel height ratio under low turbulent region but 0.15 rib height to channel height ratio gives maximum subjected to laminar flow.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.3
• /
• pp.62-70
• /
• 2007

The purpose of this research is to suggest an improved method of how to apply and operate an average floor height system to rebuilt or redeveloped apartment buildings in general residential areas of Seoul. This research suggested two research findings by a computer simulation study for analyzing the difference between the average floor height of apartment buildings in experimental sites and the average of floors of buildings near experimental sites. The first finding is that an average floor height system should be applied to apartment buildings with a limitation of maximum height at sites larger than $12,000m^2$ in order to control the difference of the maximum height of buildings between apartment sites and their surroundings. The second finding is that the average floor height system should be operated by an appropriate average floor height ratio at sites greater than $50,000m^2$ in order to harmonize rebuilt or redeveloped apartment buildings with their surroundings.

• Journal of Labour Economics
• /
• v.33 no.3
• /
• pp.129-149
• /
• 2010

We find that there is the height premium in the Korean labor market. The wage increases by 1.5% with a centimeter increase of height among male workers of ages 30-49. This estimate is barely affected by family backgrounds such as a worker's father's education or occupation. It is rejected that a worker's height is a proxy variable for his health, which increases his wage. The height premium is unrelated with obesity. It is not also supported that a worker's height affects his wage through his occupational choice. We partly confirm that a worker's height affects his wage through his educational choice. The estimated height premium of 30's in Korea is comparable to that of age 33 in Great Britain.

• Clinical and Experimental Pediatrics
• /
• v.57 no.1
• /
• pp.35-40
• /
• 2014

Purpose: Height-specific blood pressure (BP) is the standard parameter used to diagnose childhood hypertension. However, there has been some argument that weight may be a better variable than height in the reference BP standards. Therefore, before assessing the BP status using the reference BP standards, a basic understanding of the fundamental association of weight and height with BP is required. Methods: In the present study, we analyzed the correlation of BP with height and weight in Korean adolescents (age, 10-19 years), using data from the Korean National Health and Nutrition Examination Surveys (2009-2011). Results: Systolic BP (SBP) was more closely correlated with weight than with height in the normal weight (body mass index [BMI], ${\leq}85th$ percentile) and overweight (BMI, >85th percentile) groups and in the normal waist circumference (WC, ${\leq}90th$ percentile) and high WC (>90th percentile) groups in both sexes. Diastolic BP (DBP) had a higher correlation with height than with weight in the normal weight and normal WC groups, whereas weight was more closely associated with DBP than height in the overweight and high WC groups in both boys and girls. Conclusion: In Korean adolescents, weight had a greater effect on SBP than height in both the normal weight and overweight groups. DBP was mainly affected by height in the normal weight group, whereas weight was the major determinant of DBP in the overweight group. Therefore, it may be necessary to consider weight in the establishment of reference BP standards.

• 모자간호학회지
• /
• v.1
• /
• pp.34-44
• /
• 1991

The purposes of this study were to predict newborn birthweight by use of gestational period and fundal height and to identify growth curve of fundal height according to gestational period and growth curve of newborn birthweight according to fundal height. The subjects for the study were 802 women who delivered the normal newborn babies at Seoul National University Hospital from Sep. 1, 1981 to Aug.31, 1986. The data were collected bit chart review and analyzed nth SPSS program. The results of study were as follows : 1. The multiple regression equation ($R^2$=0.416) used for the prediction of newborn birthweight was y=(newborn birthweight, kg)=-4.421+0.075$x_1$(fundal height, cm)+0.053$x_2$(gestational period, weeks)+0.016$x_3$(abdominal girth, cm)+0.010$x_4$(maternal height, cm) 2. The growth curve of fundal height according to gestational period was obtained by polynomial regression. The regression equation was Y(fundal height, cm)=-36.78+18.58$log_ex$(gestational period, weeks) The growth curve of newborn birth weight according to fundal height was obtained by polynomial regression. The regression equation was Y(newborn birthweight, kg)=-8.09+3.27$log_ex$ (Fundal Height, cm) 3. In the following subgroups no significant difference was found in fundal height : engaged vs. nonengaged presentation, and nulliparous vs. multiparous women.

• The Journal of Pediatrics of Korean Medicine
• /
• v.26 no.3
• /
• pp.46-54
• /
• 2012

Objectives The purpose of this study is to find out the relationship between parents' heights and predicted height of the children who had been treated in the growth clinic of oriental medical hospital. Methods The study was conducted with 253 children who visited Oriental Medical Hospital from July 2010 to June 2012. They were analyzed by reviewing the children's chart and correlation analysis to find out the relationship between the two heights. Results In distribution of the sex and the age, sex were similar, but boys who came to the clinic were averagely younger than the girls. In predicting adult height by TW3 method and mean parent's height, correlation in the girls was higher than the boys, especially the girls after their first menstruation. Parents' heights were related to both the boys and the girls, but mother's height was more closely related. Predicted heights of the boys before secondary sex characteristics were correlated with the child's height, but rather correlated with parent's both heights after secondary sexual character and found to be more relevant to father's height. The girls' predicted heights before their menstruation were not correlated with father's height, but with mother's. Their heights after their first periods were correlated with parents' both heights, but more correlated with father's height. Conclusions This study helps set proper periods and goals of growth treatment based on the correlation between parents' height and predicted adult height according to TW3 method.