• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.93-100
• /
• 2014

In general, whey obtained from various cheese batches is being reused, so as to improve the texture and to increase the yield and the nutrient value of the various final milk-based products. In fact, re-usage of whey proteins, including whey cream, is a common and routine procedure. Unfortunately, most bacteriophages can survive heat treatments such as pasteurization. Hence, there is a high risk of an increase in the bacteriophage population during the cheese-making process. Whey samples contaminated with bacteriophages can cause serious problems in the cheese industry. In particular, the process of whey separation frequently leads to aerosol-borne bacteriophages and thus to a contaminated environment in the dairy production plant. In addition, whey proteins and whey cream reused in a cheese matrix can be infected by bacteriophages with thermal resistance. Therefore, to completely abolish the various risks of fermentation failure during re-usage of whey, a whey treatment that effectively decreases the bacteriophage population is urgently needed and indispensable. Hence, the purpose of this review is to introduce various newly developed methods and state-of-the-art technologies for removing bacteriophages from contaminated whey and whey products.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.6
• /
• pp.21-30
• /
• 2014

The purpose of this study was to evaluate human thermal comfort in summer by the type of greenery in parks and to explore planning solutions to supply a comfortable thermal environment in parks. The research was conducted in three different land cover types: a park with multi-wide-canopied trees(WOODLAND), park with grass(LAWN) and park with pavement(PAV) as reference sites in Hamyang-Gun SangrimPark. Field measurements of air temperature, relative humidity and wind velocity, short-wave and long-wave radiation from six directions(east, west, north, south, upward and downward) were carried out in the summer of 2014(August 21-23 and 29-30). Mean Radiant Temperature($T_{mrt}$) absorbed by a human-biometeorological reference person was estimated from integral radiation and the calculation of angular factors. The thermal comfort index PET was calculated by Rayman software, UTCI, OUT_SET$^*$ were calculated using the UTCI Calculator and the Thermal Comfort Calculator of Richard DeDear. The results showed that the WOODLAND has the maximum cooling effect during daytime, reduced air temperatures/$T_{mrt}$ by up to $5.9^{\circ}C/35^{\circ}C$ compared to PAV and lowered heat stress values despite increasing relative humidity values and decreasing wind velocity. While the LAWN had very slight cooling effects during daytime, reduced air temperatures/$T_{mrt}$ by up to $0.9^{\circ}C/3^{\circ}C$ compared to PAV, the improvement effects of the thermal comfort index was very slight. However, during nighttime the microclimatic and radiant conditions of WOODLAND, LAWN, and PAV were similar owing to the absence of solar radiation, reduction of wind velocity and an increase in relative humidity. Because the shading and evapotranspiration effects of the WOODLAND were much greater than the evapotranspiration effects of the LAWN, it can be said that the solutions for supplying comfortable thermal environment in parks are to amplify the green volumes rather than green areas. This study was undertaken to evaluate the human thermal comfort in summer of WOODLAND/LAWN parks and to determine the improvement effects of thermal comfort index. These results can contribute to the provision better thermal comfort for park users during park planning.

• Journal of Plant Biotechnology
• /
• v.41 no.1
• /
• pp.56-63
• /
• 2014

Using commercial radish varieties for processing, about 30% of radish was discarded due to the root shape and low purity. To raise the processing ability, we tried to develop a new variety producing H-shaped root. As another characteristic required in variety for processing is high purity, we tried to raise purity using simple sequence repeats (SSR) markers for testing seed purity in every segregating generation. To develop Male-sterile (MS) seeding parent, we crossed commercial variety of 'Gwan dong spring' and 'Gyeo ryong spring'. One elite inbred was selected as recurrent parent for the MS plant. The major horticultural traits of selected inbred line were disease resistance, late bolting, heat resistance and bright green root top color. To develop pollen parent, we crossed commercial variety of 'Tae sang king' and 'Seoul spring'. We used individual selection method to develop H-shaped hard root and disease resistant inbred. In each segregating generation, we selected one plant based on phenotype and the uniformity of selected plant was tested by SSR markers using self-pollinated seeds. In the first segregating generation, 64.6% of sib plants shared the same band in PCR amplification using ACMP-490 primer and 66.7% using cnu-316 primer. The uniformity of segregating generations using ACMP-490 and cnu-316 raised in second generation to 68.8%, 70.8%, respectively; in third generation to 93.8%, 100%; in fourth generation to 93.8%, 100%; in fifth generation to 95.8%, 100%; in sixth generation to 100%, 100%. A novel cross was made using selected MS parent and pollen parent. When we checker the horticultural traits using autumn cultivation, the novel cross variety produced H-shaped root comparing other commercial varieties and produced highly uniform radish. Thus we registered this novel cross variety as 'YR ORE' at 2013 (Registration No. 4550).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.1-7
• /
• 2017

Cobalt silicide was used as a counter electrode in order to confirm its reliability in dye-sensitized solar cell (DSSC) devices. 100 nm-Co/300 nm-Si/quartz was formed by an evaporator and cobalt silicide was formed by vacuum heat treatment at $700^{\circ}C$ for 60 min to form approximately 350 nm-CoSi. This process was followed by etching in $80^{\circ}C$-30% $H_2SO_4$ to remove the cobalt residue on the cobalt silicide surface. Also, for the comparison against Pt, we prepared a 100 nm-Pt/glass counter electrode. Cobalt silicide was used for the counter electrode in order to confirm its reliability in DSSC devices and maintained for 0, 168, 336, 504, 672, and 840 hours at $80^{\circ}C$. The photovoltaic properties of the DSSCs employing cobalt silicide were confirmed by using a simulator and potentiostat. Cyclic-voltammetry, field emission scanning electron microscopy, focused ion beam scanning electron microscopy, and energy dispersive spectrometry analyses were used to confirm the catalytic activity, microstructure, and composition, respectively. The energy conversion efficiency (ECE) as a function of time and ECE of the DSSC with Pt and CoSi counter electrodes were maintained for 504 hours. However, after 672 hours, the ECEs decreased to a half of their initial values. The results of the catalytic activity analysis showed that the catalytic activities of the Pt and CoSi counter electrodes decreased to 64% and 57% of their initial values, respectively(after 840 hours). The microstructure analysis showed that the CoSi layer improved the durability in the electrolyte, but because the stress concentrates on the contact surface between the lower quartz substrate and the CoSi layer, cracks are formed locally and flaking occurs. Thus, deterioration occurs due to the residual stress built up during the silicidation of the CoSi counter electrode, so it is necessary to take measures against these residual stresses, in order to ensure the reliability of the electrode.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.229-240
• /
• 2009

The high temperature and water content in soil profile probably affect the physiological disorder especially on cool-season turfgrasses in warm and humid weather of Korean summer. The purpose of this research was to analyze the effect of soil temperature and water content on the growth and stress response of creeping bentgrass(Agrostis palustris Huds.) under a humid and warm temperature. USGA(United State of Golf Association) green profile in laboratory test, Daily temperature changes were tested under a dried sand, 70% water content of field capacity, and saturated condition at $34^{\circ}C$ of the USGA green in lab. In this test, the dried sand reached to $80^{\circ}C$, however, the surface temperature decrease of $10^{\circ}C$ on the saturated condition. In the thermal properties test in field, thermal conductivity, thermal diffusivity, and soil temperature were increased followed by irrigation practise. In the water-deficient condition, the highest soil temperature was reached temporally right after irrigation, however, the excessive soil water content higher than field water holding capacity showed the highest soil temperature after a while. This result indicated that a heat damage to root system was caused from the thermal conductivity of a high surface soil temperature. The excessive irrigation when a high turf surface temperature should occur a negative result on tufgrass growth, moreover, it would be fatal to root growth of creeping bentgrass, especially when associated with a poor draining system on USGA sand green. Overall, this study shows that high soil temperature with water-excessive condition negatively affects on cool-season grass during the summer season, suggesting that excessive irrigation, over 70% field capacity of soil condition, does not help to reduce soil temperature for summer season in Korea. In the study that cool-season grass were treated with different water content of soil, The soil had higher temperature and more water holding capacity when treatment rate of soil conditioner was increased. The best growth at the normal water condition and the worst state of growth at thee water-excessive condition were observed.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.331-344
• /
• 2009

Buffalograss is an important turfgrass species with excellent cold, heat, and drought tolerance. Understanding the physiological integration of buffalograss under heterogeneous conditions helps to develop cultural practices that better use limited resources for uniform turf quality. The objective of this study was to evaluate physiological integration of buffalograss under water deficit stress and the involvement of lipid peroxidation and antioxidants in the process. In one experiment, buffalograss was planted in the center of a four-compartment growth unit. Watering frequencies, once a week(+) and once in two weeks(-), were combined with the sand(S) or peat(P) in each unit to generate five total treatments(P+S-P-S+, P+P+P+P+, S-S-S-S-, P-P-P-P-, and S+S+S+S+). The average number of shoot established from the heterogeneous root-zone medium was higher than the average of four possible homogeneous media. In second experiment, single ramet in Hoagland solution($S_0$) or single ramet in Hoagland solution with 20% PEG-6000($S_s$) were compared with two connectedramets under different treatments. Treatments for connected ramets were young ramet in Hoagland solution($Y_{os}$) and old ramet in Hoagland solution with 20% PEG-6000($O_{os}$), and old ramet in Hoagland solution($O_{ys}$) and young ramet in Hoagland solution with 20% PEG-6000($Y_{ys}$). Lipid peroxidation, antioxidants, and proline showedphysiological integration between ramets subjected to different levels of water stress. Superoxide dismutase(SOD), Guaiacol peroxidase(G-POD), malondialdehyde(MDA), and free proline also showed different time courses and relative activities during the physiological integration.

• Korean Journal of Heritage: History & Science
• /
• v.34
• /
• pp.124-136
• /
• 2001

Among many different types of wares, we have amazing Sacred Water-pot(따르개, 注子) from Goryo-period(고리, 高麗, 918-1392). The stylistic peculiarity of Jung-Byoung(정병, 淨甁) is described in "Goryo-Dhogyoung, 고리도경, 高麗圖經", the classical design canon. It is said, "A sharpened mouth with narrow and prolonged neck is attached upon the broad mouth with thicker and even longer neck of the pot whose body intimates to the shape of melon." One could find this Jung-Byoung similar to the Indian drinking water jar, Kundika, which has been. even today, an everyday article in houses as well as in temples. In the early Buddhist cult, the object had been adopted as personal belonging of the Bodhisattvas(보살, 菩薩), especially of the Bodhisattva Avalokitesvara(관세음보살,觀世音菩薩). In short, the purifying character of water is met by the sacred ware to deliver the refreshing Sweet-Water(Holy-Water, 깨맑물, 단물, 단이슬물, 정수, 감로, 감로수, 성수, 淨水, 甘露, 甘露水, 聖水): For the holy purpose of fulfilling the thirst of people, of symbolozing the virtuous dharma. Thus, Ggamslkh-Byoung(깨맑병,淨水), the literal Korean name, denotes purifying and clarifying and clarifying water-pot to us. Among many other Asian countries, India, China, Korea, and Japan have a profound cult of the sacred water-pot(Ggamalkh-Byoung, Jung-Byoung, 깨맑병, 정병, 정수병, 감로병, 감로수병, 淨甁, 淨水甁, 甘露甁, 甘露水甁). Therefore, this charming holy object drew much attention not only from master artisans to shape and deliver them to people but also from painters and sculptors for their endowment of the sacred images dedicated to Buddha(부처,佛,佛陀). In China, the sacred water pot emerged in the period of Tang(당, 唐, 618~907)-Period and underwent much sophistication later on, I. e., from earthenware, ceramic-porcelain, bronze, and silver. However, the following represents a challenge to the well-known Goryo-Thangka(고리불화, 高麗佛畵) Painting of Bodhisattva Avalokitesvara to our speculation on the Sacred Water-pot(정병, 淨甁). The image suggests, when examined closely, that the Sacred Water-pot has been accompanied by, or placed in, a transparent glasswere(유리그릇) or crystalbowl(수정그릇)! We have no other physical proof of the existence of such a Holding-Bowl(받침그릇, 承盤), except for in this particular painting. This Holding-Bowl would have not been a mere elaboration on the practicality of controling the drips from the mouth of the pot. As in the chapter on Tang-ho(탕호, 湯壺), or thermal bowl, in the "Goryo-Dhogyoung" it advises readers that this style of bowl is to be filled with hot water, and thus function as a preserver of heat in the water inside the pot. As an offering to the Buddha, the Sacred Water-pot could have been used for serving him hot tea. Hence the sacred bottle is to contain the refreshing water, the water transcends to nectar, and the nectar is prepared as a nectar tea to offer the Buddha. For both the Holding-Bowl of Ggamalkh-Byoung(Jung-Byoung)and the Celestial-Robe(날개옷, 天衣) of the Bodhisattva Avalokitesvara, whose specified character is the Water-Moon(수월, 水月) in this particular Thangka(불화, 佛畵) painting, the transparency is essential. This is to refer to the purity and the lucid clarity of Bodhisattva Avalokitesvara and at a deeper level, to refer to the world of Buddhas-the Tushita(Paradise, Heaven, Eden, 극락, 불세계, 極樂, 佛世界). Howerver, without the discovery of an actual Holding-Bowl, accompanied by a Sacred Water-pot, such speculation will necessarily remain hypothetical. Nevertheless, there is an abundance of evidence of our ancient craftsmanship in jade and ctystal, dating back to the Bronze Age(1000~2B.C.) in Korea. By the time of the Three Kingdom-Period(삼국시대, 三國時代, 57B.C.~935A.D.), and especially the Silla(신라, 新羅, 57B.C.~935A.D.)-Empire, the jade and crystal ornamentation had become very intricate indeed. By the Goryo-Period(918~1392) and Chosun-Period(조선, 朝鮮,1392~1910),crystal-ware and jade art were popular in houses and Buddhist temples, whose master artsanship was heightened in the numerous Sarira-Cases(사리그릇, 舍利器), containing relics and placed inside Stupas(탑, 투, 搭)! Therefore, discovering a tiny part of the crystal or jade Holding-Bowl for the Sacred Water-pot and casting full light on this subject, would not be totally impossible. Lastly the present article shares the tiny hope for a sudden emergence of such a Holding-Bowl.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.45-53
• /
• 2022

In order to improve the emission of diesel engines, natural gas-diesel dual fuel combustion compression ignition engines are in the spotlight. In particular, a reactivity controlled compression ignition (RCCI) combustion strategy is investigated comprehensively due to its possibility to improve both efficiency and emissions. With advanced diesel direct injection timing earlier than TDC, it achieves spontaneous reaction with overall lean mixture from a homogeneous mixture in the entire cylinder area, reducing nitrogen oxides (NOx) and particulate matter (PM) and improving braking heat efficiency at the same time. However, there is a disadvantage in that the amount of incomplete combustion increases in a low load region with a relatively small amount of fuel-air. To solve this, sensitive control according to the diesel injection timing and fuel ratio is required. In this study, experiments were conducted to improve efficiency and exhaust emissions of the natural gas-diesel dual fuel engine at low load, and evaluate combustion stability according to the diesel injection timing at the operation point for power generation. A 6 L-class commercial diesel engine was used for the experiment which was conducted under a 50% load range (~50 kW) at 1,800 rpm. Two injectors with different spray patterns were applied to the experiment, and the fraction of natural gas and diesel injection timing were selected as main parameters. Based on the experimental results, it was confirmed that the brake thermal efficiency increased by up to 1.3%p in the modified injector with the narrow-angle injection added. In addition, the spray pattern of the modified injector was suitable for premixed combustion, increasing operable range in consideration of combustion instability, torque reduction, and emissions level under Tier-V level (0.4 g/kWh for NOx).

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.671-687
• /
• 2021

This study investigated the firing temperature and thermal deformation process of roof tiles excavated from the connected stone-mound tomb in Seokchon-dong, Seoul, based on mineralogical and physical properties. A large number of roof tiles were excavated from the tomb site and some roof tiles were deformed by heat and were fired in uneven conditions. The colors of original roof tiles and their cores are mostly yellowish-brown, with high water absorption over 12%, containing fine-grained textures and some minerals such as quartz, feldspars, amphibole, and mica. It is estimated that the original roof tiles were fired below 900℃ in oxidation condition, showing loose matrices and mica layers by scanning electron microscopy. However, deformed roof tiles have the uneven surface color of reddish-brown and bluish-gray, and those cross-sections have sandwich structures in which dense reddish-brown surface and porous grey core coexist. They contained mullite and hercynite, so it was estimated to have been fired over 1,000℃, with 0.81~11% water absorption. In some samples, bloating pores by overfiring were observed, which means that they were fired at more than 1,200℃. In addition, the refirng experiments that the original roof tile was fired between 800℃ and 1,200℃ were carried out to investigate the physical and mineralogical properties of roof tiles compared to deformed ones. As a result, the water absorption decreased rapidly and the mineral phase started to change over 1,000℃. As the temperature gradually rises, the matrices are partially melted and recrystallized, resulting in similar thermal characteristics of deformed roof tiles. Therefore, the roof tiles from ancient tombs in Seokchon-dong seem to experience the secondary high temperature of 1,000 to 1,200℃ under uneven firing conditions, resulting in deformation characteristics such as shape transformation and mineral phase transition. It is considered to have been related to cremation rituals at the tombs of Seockchon-dong during the Baekje period.