• Corrosion Science and Technology
• /
• v.8 no.5
• /
• pp.193-196
• /
• 2009

For the estimation of uncertainty in potentiodynamic polarization resistance measurement, the type A uncertainty was measured using type 316 stainless steel in an acidified NaCl solution. Sensitivity coefficients were determined for measurand such as scan rate of potential, temperature of solution, concentration of NaCl, concentration of HCl, surface roughness of specimen and flow rate of purging gas. Sensitivity coefficients were large for the measurand such as the scan rate of potential, temperature of solution and roughness of specimen. However, the sensitivity coefficients were not the major factors influencing the combined standard uncertainty of polarization resistance due to the low values of uncertainty in measurements of the measurands. A major influencing factor was the concentration of NaCl. The value of type A uncertainty was 1.1 times the value of type B uncertainty, and the combined standard uncertainty was 10.5 % of the average value of polarization resistance.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.239-242
• /
• 2004

Pilot-scale soil washing facility was developed and operation condition was determined in order to remediate a soil contaminated with As, Ni and Zn. Soil washing facility is composed of soil particle separation, soil washing and wastewater treatment process. Both oxyanionic As and cationic Ni and Zn were effciently removed using HCl rather 0than H$_2$SO$_4$ and H$_2$PO$_4$. This is why oxyanion and cation metals can be extracted simultaneously from the contaminated soil in acidic solution. Further, the contaminated soils include calcite and then demand much acidity, that is consumption of acid solution. Fine particles are enriched with contaminants, and coarse particles are removed effectively rather than fine particles. As, Ni and Zn are strongly associated with minerals, and then the residence time should be increased for a reaction with washing solution.

• Archives of Pharmacal Research
• /
• v.13 no.4
• /
• pp.293-297
• /
• 1990

Sustained release microspheres containing phenylpropanolamine HCI (PPA) were prepared with acrylic polymer (Eudragit RL/RS) sand hydroxypropylmethylcellulose phthalate (HPMCP) using a emulsion-solvent evaporation method. Magnesium strate was used a smoothing agent for preparation of microspheres. The microspheres obtained were very spherical and free-flowing particles. Scanning electron microscopy showed that microspheres have a smooth surface and a sponage-like internal structure. The dissolution rate of PPA from the microspheres was dependent on the pH of dissolution media. PPA showed faster relase in hP 1. 2 solution than in pH 7.4 solution due to the solubility of PPA. Therefore we prepared new microspheres containing 5% (w/v) HPMCP in order to control the release of PPA. The release rate of PPA from these new microspheres was similar in pH 1.2 and pH 7.4 solution.

• Journal of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.109-112
• /
• 1964

A volumetric method of the determination of calcium carbonate and calcium fluoride in fluorspar concentrate is described. The carbonate is converted into solution by treatment of the sample in HNO$_3$-acetone (l% by volume) mixture, and the fluoride by treating the residue with H$_3BO_3$-HCl mixture. The calcium in the solution is determined volumetrically using EDTA standard solution. The selective dissolution of calcium carbonate by HNO$_3$-acetone mixture is superior to Bidtel's acetic method and little correction for the dissolution of calcium fluoride is needed. Triethanolamine is found to be superior to KCN in masking heavy metal ions.

• Journal of the Korean Chemical Society
• /
• v.5 no.1
• /
• pp.56-59
• /
• 1961

Ion exchange procedure was studied for the separation of thorium from the acidic solution obtained by means of decomposition of monazite with alkali solution. Present cation exchange method consists of adsorption of cations from the sample solution (ca. 0.6N HCl acidic) onto Amberlite IR-120 resin, elution of all of the rare earth cations with 700 ml. of 2N Hydrochloric acid, and recovery of the thorium by elution with 200ml. of 6N sulfaric acid. Thorium recovery by the ion-exchange method mentioned above, was quantitative, and it is concluded that this ion-exchange method may be used not only for industrial separation of thorium from rare earths but also for quantitative determination of thorium with relative error, ${\pm}1.0.$.

• Journal of Plant Biology
• /
• v.17 no.3
• /
• pp.113-117
• /
• 1974

In counting chromosome number and karyotype study, it is necessary to let chromosomes on metaphase by pretreatment before fixation. For this purpose, colchicine, or 8-oxyquinoline are generally used. The author found out that chromosomes could be scattered by illuminating cyanoferrate complex solution in which root-tips were sunk. As materials, 8 sorts of plant such as Allium fisturosum, allium tuberosum Rottler, Triticum vulgare were used. Their root-tips were sunk on the bottom of beaker in potassium ferricyanide solution $3{\times}10-4M$ and illuminated through the solution by sterilizing lamp for 1~2 hours in dark room, keeping 10 cm distance from light source to the surface of solution and 2cm depth of solution. Then again, they were illuminated to the light which was somewhat weaker intensity than the former (distance, 16cm; depth, 3cm) for 1.5~2 hours after immersed in 1/100N-HCl and washed in water for each 5minutes. By such methods chromosomes could be scattered. About the mechanism of scattering, it is supposed that CN and Fe(CN)x ions $(x {\leq}5)$ which were gradually produced in the process of photodissociation acted together on the scattering of chromosomes.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.2
• /
• pp.116-121
• /
• 1999

This study was aimed to explain the essence of Hydroxylammonium hydrochloride(H.A.) effect on degummed silk fiber increasing the colour sites due to oxime generating reaction. H.A. in aqueous solution caues to increase the amount of [H+] and reduce pH values as the concentration of H.A. increases. The rate of [H+] absorption of silk fiker in acidic solution differs on the basic of solution pH and shows a specific uptake in each pH, the lower the pH of solution, the higher the amount [H+] absorption. The pH of solution after treating of silk fiber in H.A. and HCl, showed more remaining [H+] in H.A. solution due to [H+] releasing under the procedure of oxime production. Also it was revealed that in higher concentration of H.A. the reaction for oxime fixation in silk fiber carried out stonger and as a result the bigger gap with acid uptake curve appeared. FT-IR analysis of silk fiber treated with H.A. revealed the creating of intermolecular H-bond at the 2,981-2.930 cm-1, which was not appeared for nontraeted silk fibers and shows H-bond between N-OH group in oue chain and C=) group in another chain of silk protein. Colourimetry of dyed silk fiber after H.A. tratment showed that the silk fiber treated with the high concentration of H.A. compare to low concentration, absorbed more dyeing molecules and so Showed less percontage of Whiteness.

• Membrane and Water Treatment
• /
• v.3 no.2
• /
• pp.123-131
• /
• 2012

This study investigated the extraction and stripping performance of PIMs consisting of PVC and Aliquat 336. Extraction and stripping of three representative heavy metals - namely $Cd^{2+}$, $Cu^{2+}$, and $Zn^{2+}$ - by the synthesized membranes were evaluated as a function of sodium chloride concentration and under different stripping solutions (0.01 M $HNO_3$, Milli-Q water, 0.01 M HCl and 0.01 M NaOH), respectively. Results reported here indicate that the formation of negatively charged metal chloride complex species was responsible for the extraction of the target metal to PIMs. Experimental results and thermodynamic modeling of the speciation of chloro metal complexes further confirm that the extraction selectivity between $Cd^{2+}$, $Cu^{2+}$ and $Zn^{2+}$ can be controlled by regulating the chloride concentration of the feed solution. An acidic solution without any chloride was the most effective stripping solution, followed by Milli-Q water, and a diluted hydrochloric acid solution. On the other hand, the stripping of metals from PIMs did not occur when a basic stripping solution was used.

• Journal of the Korean institute of surface engineering
• /
• v.5 no.2
• /
• pp.1-4
• /
• 1972

We have studied about the optimum chemical etching and sensitizing conditions of the plating on plastics. As specimen 'Mitzubishi Nobren MM2A' was used. The results were as follow. 1) The optimum chemical etching conditions. Etched the specimens for $10{\sim}40$ minutes at $70{\sim}80^{\circ}C$ with the etching solution of table 1, and for $10{\sim}15$ minutes at $65{\sim}70^{\circ}C$ with the etching solution of table 2 Table 1. Etching solution (I) Composition : $H_2SO_4(95%)-Component : 250 ml, Composition : $H_3PO_4(85%)$ - Component : 75ml, Composition : $K_2Cr_2O_7$ - Component : 12.5g, 2) The optimum sensitizing conditions. Sensitized the specimens for $60{\sim}90$ seconds at $25^{\circ}C$ with the sensitizing solution of table 3 Table 2. Etching solution (II) Composition : $H_2SO_4(95%)$ - Component : 22.5ml, Composition : $H_3PO_4(85%)$ - Component : 15ml, Composition : $CrO_3$ - Component : 105g, Composition : Water - Component : 150 ml, Table 3. Sensitizing solution Composition : $SnCl_2$ - Component : 9g, Composition : HCl(35%) - Component : 36ml, Composition : Water - Component : 300 ml

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.741-745
• /
• 2005

Pectin was dissolved in HCl, citric acid, and deionized distilled water (DW, 2%, v/v) and irradiated at different irradiation doses (2.5-50 kGy) by gamma ray to investigate its physicochemical characteristics and biological activity. Viscosity of pectin solution was significantly decreased by irradiation up to 10 kGy, then remained constant thereafter. Gamma-irradiation increased monosaccharide and polysaccharide levels up to 30-40 kDa. Electron donating ability of pectin solution was highest when DW was added and was increased by increasing irradiation dose (p<0.05). ${\beta}-Carotene$ bleaching assay revealed irradiation resulted in development of antioxidantive activity in pectin solution. Growth inhibition of cancer cell lines was observed in irradiated pectin solution in dose-dependent manner, with G36l showing the highest. Results suggested irradiation of pectin solution could be effective for preparation of functional pectin oligomer.