• 한국응용곤충학회지
• /
• 제27권2호
• /
• pp.94-102
• /
• 1988

주사전자현미경 및 광학현미경을 이용하여 밝혀낸 담배나방(Heliothis assulta Guenee) 유충의 촉각 및 구기의 감각기 구조는 다음과 같다. 촉각은 세마디로 되어있지만 마지막 두마디에만 감각기가 분포하고, 기절은 단순히 촉각을 머리에 부착시킨다. 병절은 2개의 털 감각기와 3개의 방망이형 가각기를 가며, 편절은 3개의 방망이형 감각기와 2개의 2마디로된 방망이형 감각기를 갖는다. 큰 턱은 측면에 2개의 털 감각기를 가지며, 작은턱의 외엽에는 2개의 털, 3개의 방망이형 및 2 개의 종상형 감각기가 있다. 작은 턱 수염의 2마디중 첫째마디는 1개의 digitiform 감각기만을 갖는다. 그러나 둘째마디는 11개의 감각기를 갖는데. 1개의 digitiform 과 2개의 종상형 감각기는 측면에, 8개의 방망이형 감각기는 마디 끝에 위치한다. 윗입술은 외표면에 12개의 털, 내표면에 6개의 털, 2쌍의 함몰형과 1쌍의종상형 감각기를 갖는다. 퇴화된 아랫입술은 작은턱과 융합되어서, 하인두, spinneret, 수염을 지지하며, 이들중 아랫입술염에만 2개의 방망이형 감각기가 있다. 구조적 측면에서 감각기의 기능을 추정해보았으며 구기 전체 감각기의 70%를 차지하는 작은턱 감각기가 먹이 선택 행동에 중요한기능을 할 것으로 보인다.

• Bulletin of the Korean Chemical Society
• /
• 제29권7호
• /
• pp.1359-1363
• /
• 2008

Second-order rate constants have been determined spectrophotometrically for reactions of 2,4-dinitrophenyl 2- thiophenecarboxylate (2) with a series of alicyclic secondary amines in 80 mol % $H_2O$/20 mol % DMSO at 25.0 ${\pm}$ 0.1 ${^{\circ}C}$. The Brønsted-type plot exhibits a downward curvature, i.e., the slope decreases from 0.74 to 0.34 as the amine basicity increases. The $pK_a$ at the center of the Brønsted curvature, defined as $pK_a^o$, has been determined to be 9.1. Comparison of the Brønsted-type plot for the reactions of 2 with that for the corresponding reactions of 2,4-dinitrophenyl 2-furoate (1) suggests that reactions of 1 and 2 proceed through a common mechanism, although 2 is less reactive than 1. The curved Brønsted-type plot has been interpreted as a change in RDS of a stepwise mechanism. The replacement of the O atom in the furoyl ring by an S atom (1 $\rightarrow$ 2) does not alter the reaction mechanism but causes a decrease in reactivity. Dissection of the apparent second-order rate constants into the microscopic rate constants has revealed that the $k_2/k_{-1}$ ratio is not influenced upon changing the nonleaving group from furoyl to thiophenecarbonyl. However, $k_1$ has been calculated to be smaller for the reactions of 2 than for the corresponding reactions of 1, indicating that the C=O bond in the thiophenecarboxylate 2 is less electrophilic than that in the furoate 1. The smaller k1 for the reactions of 2 is fully responsible for the fact that 2 is less reactive than 1.

• 한국세라믹학회지
• /
• 제23권6호
• /
• pp.37-44
• /
• 1986

Yttria-antimonia-stabilized zirconia was investigated with respect to the amount of $Sb_2O_3$ addition in the range of 0.5~5mole% to the base composition of $(ZrO)_{0.92}(Y_2O_3)_{0.08}$ The sinterbility modulus of rupture Vickers hardness evaporation of components phase form-tion and mcicrostructure were evaluated with antimonia content. Also two probe A. C conductivity measurement was subjected to all specimens and the best results are achieved with 1mol% $Sb_2O_3$ as a sinter agent and relative density of~98% obtained at 140$0^{\circ}C$ and this composition has a maximum electrical conductivity due to the possible substition of $Sb^{3+}$ for $Zr^{4+}$ site. The effect of $Sb_2O_3$ on the electrical conductivity of th bulk and the grain boundaries has on investigated using frequency dispersion analysis (5~106 Hz) Antimonia addition has a negative in-fluence on both the bulk and the grain boundary conductivity except for a 1 mon% addition. The additive antimonia has improve a modulus of rupture to 60~MPa due to metastable-tetragonal phase apparence and decrease the hardness with increasing the $Sb_2O_3$ content.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.438-444
• /
• 1989

The role of TiC and the effect of Y2O3 addition on the densification, microstructure and mechanical properties of Al2O3-TiC composite have been studied. The amount of Y2O3 has been varied from 0 to 2 wt.% while keeping the TiC content at 10, 20 or 30 wt.%. The powder compacts have been sintered at 1,75$0^{\circ}C$ for various times in 1 atm Ar atmosphere and hot isostatically pressed (HIPed) at 1,$600^{\circ}C$ for 0.5h under 1,500atm Ar. Considerable increase in sintered density(over 95%) has been achieved by adding 0.5 wt.% Y2O3 in specimens containing high TiC volume. More addition of Y2O3 does not affect the densification. With increasing the sintering time from 0.5 to 4h, slight increase in density results. The growth of Al2O3 grain has been enhanced by Y2O3 addition ; this tendency is reduced with increasing TiC content because of grain boundary dragging effect of TiC particles. The hardness of specimens increases considerably by an addition of 0.5wt.% Y2O3 owing to the density increase. Further addition of Y2O3 has no effect on hardness. Fracture toughness augments with TiC content by crack deflection around the particles. By adding 0.5wt.% Y2O3, all the specimens can be densified to isolated pore stage and thus can be HIPed to full densification and better mechanical property. In particular, the fracture toughness of Al2O3-30 TiC specimen increases about 50% by HIPing. Fully dense Al2O3-30 TiC with good mechanical properties can be prepared by normal Sintering/HIPing process.

• 한국의류산업학회지
• /
• 제20권6호
• /
• pp.645-655
• /
• 2018

Online to Offline(O2O), a new model of e-commerce, has been gradually recognized and accepted by consumers. Electronic commerce has become diversified and O2O marketing is the new trend of e-commerce. The rapid popularization of mobile Internet and online shopping makes O2O service gets more attention. Although recently O2O service and O2O marketing get much attention, there is no much preceding research about the antecedents of mobile shopping of O2O market. The purpose of the study is to examine the effect of shopping orientation on intention to reuse O2O services and the moderating effect of impulse buying tendency. A total of 209 surveys were collected online in total for the data of the study. The key findings of this study are as follows: First, convenience seeking shopping orientation has a positive effect on the intention to reuse O2O service and brand seeking shopping orientation has, too. Second, impulse buying tendency positively moderated the relationship between hedonic seeking shopping orientation and intention to reuse O2O service, and negatively moderated sales seeking shopping orientation and intention to reuse O2O service. The results of this study presented some implications for operators at O2O service area. Research findings and study limitations are discussed.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권5호
• /
• pp.220-229
• /
• 2004

We have examined a technique of one-dimensional (1D) fluid modeling for radio-frequency Ar capacitively coupled plasmas (CCP) between unequal-sized powered and grounded electrodes. In order to simulate a practical CCP reactor configuration with a grounded side wall by the 1D model, it has been assumed that the discharge space has a conic frustum shape; the grounded electrode is larger than the powered one and the discharge space expands with the distance from the powered electrode. In this paper, we focus on how much a 1D model can approximate a 2D model and evaluate their comparisons. The plasma density calculated by the 1D model has been compared with that by a two-dimensional (2D) fluid model, and a qualitative agreement between them has been obtained. In addition, 1D and 2D calculation results for another reactor configuration with equal-sized electrodes have also been presented together for comparison. In the discussion, four CCP models, which are 1D and 2D models with symmetric and asymmetric geometries, are compared with each other and the DC self-bias voltage has been focused on as a characteristic property that reflects the unequal electrode surface areas. Reactor configuration and experimental parameters, which the self-bias depends on, have been investigated to develop the ID modeling for reactor geometry with unequal-sized electrodes.

• STI Policy Review
• /
• 제2권2호
• /
• pp.11-24
• /
• 2011

S&T policy has been traditionally regarded as a sector policy; however, it is now evolving into an infrastructure innovation policy that forms the foundation of diverse types of policies. Simultaneously, environmental and energy policies formerly considered as sector policies are now being expanded and integrated into a higher level policy for sustainable development. With these changes underway, the importance of policy integration has increased. Efforts are being made to minimize contradictions between environmental, social, and innovation policies that emphasize proactive linkage among policies or place the highest priority on environmental policy following the theory of Environmental Policy Integration (EPI). Confronted with these policy changes, the Lee Myung-bak government announced "Low-Carbon Green Growth" in 2008 as national agenda for development that focus attention on environmental and energy issues. Economic policy and environmental policy have been traditionally seen in a conflicting relationship with different paths of policy development. However, the administration of President Lee is now emphasizing the synergy effects between the environment and economic growth with the concept of green growth. The green growth policy of the Korean government has great significance as it has built a momentum for incorporating social goals such as environmental values or sustainable development into economic growth-oriented policies; however, there remain many challenges due to the legacy of the development period that has dominated Korean society. The Korean government says it reflects "EPI" or "environmentalism" in policy goals; however, in reality it prioritizes development over the environment.

• 한국지능시스템학회논문지
• /
• 제8권6호
• /
• pp.129-135
• /
• 1998

본 논문은 서러 다른 접근방식을 사용하는 카오스 회귀 신경예측모델과 다층 신경회로망이 결합하여 고립음의 인식률을 높이고자 하였다. 전반적으로 다층신경회로망은 MLP와 결합한 인식률은 1.2%에서 2.5% 이상이 개선 되었다. 이는 서로 인식하는 방법이 다르기 때문에 서로 상호 보완되고, 카오스의 다이내믹 성질이 인식률을 개선시켰음을 실험으로 밝혔다. MLP와 결합한 인식률은 카오스 다층신경망일 때가 가장 좋았다. 그러나 학습시 알고리즘이 단순하고, 신뢰도 면에서는 오히려 카오스 단층 신경망이 인식률은 0.5%정도 떨어지지만 더욱 좋다고 생각된다. 주로 MLP는 숫자음 “일”과 “오”에서 우수한 성적을 나타내었고, 카오스 예측 신경망은 숫자음 “영”, “삼”, “칠”에서 우수하였다.

• 물과 미래
• /
• 제28권5호
• /
• pp.163-174
• /
• 1995

하천제방의 붕괴 및 월류에 따른 제내지에서의 범람 홍수파 해석을 위해서 DFLOW-2 모형을 개발하였다. 본 DFLOW-2 모형은 1990년 9월 한강 하류부의 일산제 제방붕괴의 경우에 대해서 적용하였다. 인도교에서 전류구간에 대한 1차원 부정류 해석을 실시하였고, 제방붕괴에 따른 월류량을 1차원 해석에서 내부 경계조건으로 처리하였다. 제방붕괴 후의 제내지에서의 2차원 범람 해석을 실시하었고, 이를 후처리모형을 이용하여 주요시간대별 홍수범람 수위와 유속분포도등을 작성하였다. 계산된 결과는 당시의 현지조사 결과 및 홍수흔적치등과 비교하여 범람수위, 홍수도달시간 및 범람범위등에서 비교적 잘 일치하고 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.127-134
• /
• 2011

유전알고리즘을 사용하여 액체로켓엔진의 연소실 압력과 노즐 확장비, O/F 비 등 주요 설계변수를 최적화하였다. 대상엔진은 LO2/RP-1을 추진제로 사용하는 개방형 가스발생기 사이클을 대상으로 하였다. 연소실의 물성치는 CEA2를 이용하였으며, 무게 산출은 참고문헌을 바탕으로 모델링 하였다. 최적설계의 목적함수는 비추력과 추력중량비를 다중목표로 설정하여 가중치 방법을 사용하였다. 유전알고리즘을 최적화 과정을 거친 결과 비추력은 최대 4%, 추력중량비는 최대 23% 정도 증가하였다. 또한 다양한 추력에 대해서 Pareto frontier line을 얻었다.