• Transactions of Materials Processing
• /
• v.27 no.3
• /
• pp.160-164
• /
• 2018

The success of warm forming of Mg alloy sheets is very dependent on its frictional behavior at elevated temperatures. The effects of contact pressure and sliding length on the frictional characteristics of AZ31B Mg alloy sheet were investigated at elevated temperature and at room temperature. The contact pressure range for the friction test was determined through FE analysis of the roof panel which is a candidate for Mg alloy application. According to the experimental results, the frictional behavior of the Mg alloy sheet is equally highly influenced by both sliding length and contact pressure at room temperature. At elevated temperatures, however, the sliding length has a more dominant influence on the frictional characteristics of the Mg alloy sheet than the contact pressure, if the contact pressure is lower than a certain level.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.160-164
• /
• 2014

Recently, there has been an active study about friction force of moving parts for automotive. This study is development and evaluation of oil pockets for journal bearing and tappet valve for range extended electric vehicle. Specially, oil pockets are effect on friction force depend on pitch, size, depth. In this study, fine oil pocket was formed using by etched texturing on the journal bearing and tappet valve. And oil pocket analyzed by SEM and friction force test was carried out by tensile tester. Finally, in this study, it was suggested by round and plane part which journal besring and tappet valve.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.160-164
• /
• 2020

Papenfussiella densa was described as Papenfussiella kuromo f. densa from Japan by Inagaki in 1958. P. densa has been recognized as an endemic and independent species based on the molecular analyses of type material without detailed morphological observations. In this study, Papenfussiella densa is reported as a new record from Dok-do, South Korea, based on morphological and molecular analyses. Papenfussiella densa is mainly characterized as having narrow, branched, slimy, and tomentose thalli with branchlets, partially hollow in the medulla of the middle part. The molecular analyses of the chloroplast rbcL-rbcS DNA sequence of the Papenfussiella densa sample from Korea revealed that it matched that of P. densa from Japan and was nested in the clade of Papenfussiella. There was only a 0.02% gene sequence divergence between the Korean and Japanese samples. We report P. densa as a new record from Korea and add this species to the list of Korean macroalgal flora.

• Applied Microscopy
• /
• v.46 no.3
• /
• pp.160-163
• /
• 2016

Effect of dealloying condition on the formation of nanoporous structure in melt-spun $Al_{60}Ge_{30}Mn_{10}$ alloy has been investigated in the present study. In as-melt-spun $Al_{60}Ge_{30}Mn_{10}$ alloy spinodal decomposition occurs in the undercooled liquid during cooling, leading to amorphous phase separation. By immersing the as-melt-spun $Al_{60}Ge_{30}Mn_{10}$ alloy in 5 wt% HCl solution, Al-rich amorphous region is leached out, resulting in an interconnected nano-porous $GeO_x$ with an amorphous structure. The dealloying temperature strongly affects the whole dealloying process. At higher dealloying temperature, dissolution kinetics and surface diffusion/agglomeration rate become higher, resulting in the accelerated dealloying kinetics, i.e., larger dealloying depth and coarser pore-ligament structure.

• Transactions of Materials Processing
• /
• v.13 no.2
• /
• pp.160-167
• /
• 2004

In order to theoretically analyze the creep behavior of high Cr steel at $600^{\circ}C$, a unified elasto-viscoplastic constitutive model based on the consideration of dislocation density is proposed. A combination of a kinetic equation describing the mechanical response of a material at a given microstructure in terms of dislocation glide and evolution equations for internal variables characterizing the microstructure provides the constitutive equations of the model. Microstructural features of the material such as the grain size and spacing between second phase particles are directly implemented in the constitutive equations. The internal variables are associated with the total dislocation density in a simple model. The model has a modular structure and can be adjusted to describe a creep behavior using the material parameters obtained from uniaxial tensile tests.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.160-170
• /
• 2002

Many of aged and damaged concrete structure have been revitalized with composite reinforcement. Flexural behaviors of composite-patched concrete specimens are characterized by high-sensitivity moire interferometry. The three-mirror, four-beam interferometry system and a compact loading system are used for obtaining singe patterns representing whole-field contour maps of in-plane displacements. It is seen from the calibration test for the loading system that the measured bending displacement is in excellent agreement with the displacement calculated by the beam theory. The crack opening displacement as well as the bending and the horizontal displacement fur the notched and unnotched specimen are investigated. The results also show that the notched specimen reinforced by a composite sheet has sufficient stiffness and strength compared to the original concrete specimen.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.111-116
• /
• 2007

A high power LED which is being used in many illumination applications as a new light source was simulated for its physical structure and then its optical properties were analyzed. To obtain accurate results from the designed LED model, properties of the die chip and reflector cup were varied. As a result, a high power LED model which has a radiation pattern of a Lambertian with its viewing angle of approximately $140^{\circ}$ and total included angle of $160^{\circ}$ was designed.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.160.1-160.1
• /
• 2012

We present an alternative approach for satellite formation reconfiguration by an optimal impulsive-thrust strategy to minimize the total characteristic velocity in a near-circular-orbit. Linear transformation decouples the Hill-Clohessy-Wiltshire(HCW) dynamics into a new block-diagonal system matrix consisting of 1-dimensional harmonic oscillator and 2-dimensional subsystem. In contrast to a solution based on the conventional primer vector theory, the optimal solution and the necessary conditions are represented as times and directions of impulses. New analytical expression of the total characteristic velocity is found for each sub systems under general boundary conditions including transfer time constraint. To minimize the total characteristic velocity, necessary conditions for times and directions of impulses are analytically solved. While the solution to the 1-dimensional harmonic oscillator has been found, the solution to the 2-dimensional subsystem is currently under construction. Our approach is expected to be applicable to more challenging problems.

• Journal of Chest Surgery
• /
• v.53 no.4
• /
• pp.160-167
• /
• 2020

Surgical resection is the mainstay of treatment for locally advanced esophageal cancer. Neoadjuvant therapy is recommended to improve survival, based on the results of several randomized trials and meta-analyses. However, controversy remains regarding how to combine surgery, radiotherapy, and chemotherapy. Moreover, in East Asia, the predominant histological type is esophageal squamous cell carcinoma, which has a different epidemiology and tumor biology from esophageal or gastroesophageal junctional adenocarcinoma. As such, the management of esophageal cancer in East Asia seems to be different from that in Western countries. Thus, this article reviews the current evidence on neoadjuvant therapy and considers the optimal combinations and ongoing strategies of multimodal therapy for esophageal squamous cell carcinoma.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2002.11b
• /
• pp.160-160
• /
• 2002

Previously, we reported a novel polymeric micellar solubilizer, Aceporol 330, that showed relatively low toxic effects when it was compared with that of Cremophor EL which is currently being used for paclitaxel. In this study, we have developed a new micellar solubilizer, Aceporol 460, that has 3-4 times higher lading capacity for paclitaxel than Aceporol 330.(omitted)