1 |
D. H. Park, Y. H. Tak, S. H. Um, J. J. Yun, C. W. Lee, 2013, Car Body Forming Technology using Magnesium Alloy Sheet, Proc. Kor. Soc. Tech. Plast. Conf., pp.239-240.
|
2 |
G. H. Lee, T. W. Yoon, C. Y. Kang, 2014, A Study on the Mechanical Properties and Formability of Mg AZ31B Sheet, Trans. Mater. Process., 23(8), pp.495-500.
DOI
|
3 |
S. H. Kim, K. D. Park, J. H. Jang, K. T. Kim, H. W. Lee, G. A. Lee, K. P. Kim, Y. S. Lee, 2008, Experimental and Analytical Researches on Mechanical Properties Related to Formability of AZ31B Alloy Sheet, Trans. Mater. Process., 17(7), pp.466-472.
DOI
|
4 |
H. Y. Kim, S. C. Choi, H. S. Lee, H. J. Kim, K. T. Lee, 2007, Experiments for Forming Limit Diagram and Springback Characteristics of AZ31B Magnesium Alloy Sheet at Elevated Temperature, Trans. Mater. Process., 16(5), pp.364-369.
DOI
|
5 |
Y. S. Lee, Y. N. Kwon, S. H. Kang, S. W. Kim, J. H. Lee, 2008, Forming Limit of AZ31 Alloy Sheet and Strain Rate on Warm Sheet Metal Forming, J. Mater. Process. Technol., Vol. 201, No. 1, pp. 431-435.
DOI
|
6 |
H. W. Kwon, N. Yoon, J. C. Kim, Y.-J. Jeong, Y.-S. Kim, 2011, Tribological Characteristics during Sheet Forming of the AZ31B Mg alloy, Proc. Kor. Soc. Tech. Plast. Conf., 10, pp.88-91.
|
7 |
H. Gwon, M. G. Kim, H. L. Hur, Y.-S. Kim, 2014, Correlation between galling and friction coefficient measured during sheet forming of Mg alloy using a steel die, Proc. Kor. Soc. Tech. Plast. Conf., 10, pp.174-177.
|