• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.570-575
• /
• 2018

Hydroxyapatites (HAps) were synthesized using the powdered waste of fishery products, i.e., fish scales and crab shells, as starting materials. HAp was synthesized by a wet-chemistry method followed by calcination at 600 and $800^{\circ}C$. Calcined crabshell powder revealed a single HAp phase and fine powder, while calcined fish-scale powder showed a ${\beta}-TCP$ secondary phase, even at the higher calcination temperature. Dense HAp pellets were obtained from the crab-shell powder by spark plasma sintering at $1000^{\circ}C$ for 10 min under applied pressures of 40 and 80 MPa in a vacuum state, giving sample densities of 2.93 and $3.06g/cm^3$, respectively. The estimated grain size of HAp was $448{\pm}96$ and $283{\pm}59nm$ for applied pressures of 40 and 80 MPa, respectively. In contrast, the HAp obtained using the pressureless sintering technique showed excessive grain growth without further densification.

• 한국환경보건학회지
• /
• 제39권6호
• /
• pp.541-549
• /
• 2013

Objectives: We analyzed the characteristics of hazardous air pollutants (HAPs) in road tunnels in Seoul. Methods: Particle matter ($PM_{10}$), elemental carbon (EC), organic carbon (OC), and 16 species of polycyclic aromatic hydrocarbons (PAHs) in two road tunnels (NS tunnel and HJ tunnel) were sampled and analyzed from 2007 to 2011. Results: Levels of $PM_{10}$ and carbon ingredients which were mainly emitted from diesel-fueled vehicles showed a declining tendency in both road tunnels. PAHs levels in HJ were declining slightly while PAHs levels in the NS tunnel fluctuated considerably and showed an increasing tendency. Conclusions: These results suggested that the abatement project of diesel vehicle emissions by the Seoul metropolitan government from 2007 has had an impact on the reduction of DVE into the air, though there exist many things to consider for analyses.

• 한국분무공학회지
• /
• 제20권3호
• /
• pp.149-155
• /
• 2015

With increasing of GDP, the registration number of passenger cars has exceeded 20 million last year in Korea. Especially, the registration number of the diesel engine vehicles has been increasing. However, the WHO(World Health Organization) IARC (International Agency for Research on Cancer) has reported that diesel engine exhaust gas is an one of HAPs, which has carcinogenic for human, and they have designated it to Group 1. To solve this problem, exhaust gas from diesel engines has to be controlled. Thus, it has been controlling by European regulatory standard in Korea. On the other hand, in order to meet the enhanced emission regulations, all manufacturing company applied $NO_x$ control device to vehicles such as EGR (Exhaust Gas Recirculation), SCR (Selective Catalytic Reduction) and so on. However, these devices (EGR, SCR) were operated by difference reaction mechanism respectively, and the composition of exhaust gas would be differenced from that of them. In this study, it was conducted to evaluate variety characteristics on changing of exhaust gas composition by each $NO_x$ control device, and the heavy duty diesel trucks were chosen as experimental vehicles. From the result, it revealed that vehicles (with EGR) were discharged higher THC as 52.5% than that of others (with SCR). However, it did not followed that trend, in the case of CO; it was discharged as 57.2% lower than that of others (with SCR). In the future, these data would be used to apply to efficient $NO_x$ control device for meeting to EURO 6.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1678-1683
• /
• 2003

DBD(Dielectric Barrier Discharge) plasma in air is well established for the production of large quantities of ozone and is more recently being applied to aftertreatment processes for HAPs(Hazardous Air Pollutants). Although DBD high electron density and energy, its potential use as nano and sub-micron sized particle charging are not well known. Aim of this work is to determine design and operating parameters of a two-stage ESP with DBD. DBD and ESP are used as particle charger and precipitator, respectively. We measured particle precipitation efficiency of two-stage ESP and estimated ozone decomposition of both pelletized $MnO_2$ catalyst and pelletized activated carbon. To examine the particle precipitation efficiency, nano and sub-micron sized particles were generated by a tube furnace and an atomizer. AC voltage of $7{\sim}10$ kV(rms) and 60 Hz is used as DBD plasma source. DC -8 kV is applied to the ESP for particle precipitation. The overall particle collection efficiency for the two-stage ESP with DBD is over 85 % under 0.64 m/s face velocity. Ozone decomposition efficiency with pelletized $MnO_2$ catalyst or pelletized activated carbon packed bed is over 90 % when the face velocity is under 0.4 m/s in dry air.

• 한국대기환경학회지
• /
• 제16권1호
• /
• pp.11-22
• /
• 2000

Polycyclic aromatic hydrocarbons(PAHs) have known as potentially hazardous air pollutants(HAPs0 to human health because of its carcinogenic and mutagenic behaviors. The purpose of this study was to determine the level of 6 PAHs(Fluoranthene, Pyrene, Benzo[a]anthracene, Chrysene, Benzo[b]fluoranthene, and Benzo[a]pyrene) as well as 10 inorganic elements(Cr, Na, K, Zn, Pb, Fe, Cu, Ti, Al and Cd) in the ambient PM-10. The total of 115 samples had been collected from February, 1996 to June, 1996 on quartz fiber by a PM-10 high volume air sampler near the Yong-Tong Apartment complexes. A statistical analysis was performed for the PAHs and inorganic elements data set using a principal component analysis in order to identify qualitatively the potential sources of PM-10. A total of 6 principal components were separated by intensive data pretrement and transformation processes, such as soil, refuse incineration, oil burning, coal burning, field burning, vehicle emission sources. The results showed that PAHs were associated with various burning activities like refuse and field burning, coal burning, and oil burning emissions in the study area. These derived sources were well matched with the previously known source profiles in terms of compositonal order and level of measured species. The combination data set consisted of both organic and inorganic species might provide more powerful source signature and might increase the number of potentially derived sources than PAHs or inorganic data alone.

• 한국통신학회논문지
• /
• 제32권6A호
• /
• pp.642-647
• /
• 2007

HAP(High Altitude Platform)을 이용한 무선 통신 시스템은 기존의 지상 및 위성 시스템보다 여러 고유의 장점을 통해 3세대 IMT-2000 무선 서비스를 제공하기 위한 대체 수단으로 제안되고 있다. W-CDMA HAP 시스템은 지상 이동 통신 시스템과 마찬가지로 인접 셀의 간섭을 줄이면서 시스템 용량을 증가시키기 위한 전력 제어가 가장 중요한 기술 중의 하나이므로 이에 대찬 연구가 요구되는 실정이다. 본 논문에서는 기존의 지상 이동 통신 시스템에서 이용되고 있는 SIR(signal-to-interference ratio) 기반의 DB(distributed balancing) 알고리즘에 HAP 시스템만의 고유의 기하학적 구조에 의한 간섭 프로파일을 도입하여 전력 제어를 행함으로서 기존의 HAP 시스템에 제안되고 있는 DBPA(distance-based power allocation) 알고리즘에 의한 전력 제어보다 성능을 크게 개선시킬 수 있을 뿐만 아니라 안테나 최대 이득(또는 사이드로브 특성 등)에 의해 나타나는 성능 변화를 제거할 수 있다.

• 환경영향평가
• /
• 제28권6호
• /
• pp.616-625
• /
• 2019

건강영향평가는 개발사업 시행에 따른 사람의 건강에 미치는 영향을 예측하여 건강피해를 최소화하기 위한 목적으로 환경영향평가 내에서 시행되고 있다. 하지만 건강영향평가 시 유해대기오염물질 배출량 산정방법에 대한 일관성 부족으로 건강영향평가 매뉴얼 개선이 필요하나, 아직 개정은 되지 않고 있다. 본 연구는 실제 산업단지 개발 사례 및 기 수행된 건강영향평가를 중심으로 유해대기오염물질 배출량 산정 시 매뉴얼에 제시된 원단위 산정 방법을 다르게 적용한 4가지 사례를 선정하여 각각 배출량을 산정하였다. 각 산정된 배출량을 토대로 CALPUFF 모델을 이용한 확산농도 예측 후, 노출농도를 기준으로 위해성 평가를 시행하였다. 위해성 평가 결과, 배출량 산정 방법별 위해도 수준의 차이가 비교적 크게 나타남에 따라, 배출량 산정시 원단위 적용에 대한 매뉴얼 개선이 필요한 것으로 검토되었다. 또한 배출량 산정 시 근거자료 활용에 대한 일관성, 건강영향평가에 최적화된 배출계수 개발, 현황 조사에 대한 신뢰성 향상이 필요할 것으로 판단된다.

• 한국대기환경학회지
• /
• 제30권4호
• /
• pp.362-377
• /
• 2014

Polycyclic aromatic hydrocarbons (PAHs) have been of particular concern since they are present both in the vapor and particulate phases in ambient air. In this study, a simple method was applied to determine the vapor phase PAHs, and the performance of the new method was evaluated with a conventional method. The simple method was based on adsorption sampling and thermal desorption with GC/MS analysis, which is generally applied to the determination of volatile organic compounds (VOCs) in the air. A combination of Carbotrap (300 mg) and Carbotrap-C (100 mg) sorbents was used as the adsorbent. Target compounds included two rings PAHs such as naphthalene, acenaphthylene, and acenaphthene. Among them, naphthalene was listed as one of the main HAPs together with a number of VOCs in petroleum refining industries in the USA. For comparison purposes, a method based on adsorption sampling and solvent extraction with GC/MS analysis was adopted, which is in principle same as the NIOSH 5515 method. The performance of the adsorption sampling and thermal desorption method was evaluated with respect to repeatabilities, detection limits, linearities, and storage stabilities for target compounds. The analytical repeatabilities of standard samples are all within 20%. Lower detection limits was estimated to be less than 0.1 ppbv. In the results from comparison studies between two methods for real air samples. Although the correlation coefficients were more than 0.9, a systematic difference between the two groups was revealed by the paired t-test (${\alpha}$=0.05). Concentrations of two-rings PAHs determined by adsorption and thermal desorption method consistently higher than those by solvent extraction method. The difference was caused by not only the poor sampling efficiencies of XAD-2 for target PAHs and but also sample losses during the solvent extraction and concentration procedure. This implies that the levels of lower molecular PAHs tend to be underestimated when determined by a conventional PAH method utilizing XAD-2 (and/or PUF) sampling and solvent extraction method. The adsorption sampling and thermal desorption with GC analysis is very simple, rapid, and reliable for lower-molecular weight PAHs. In addition, the method can be used for the measurement of VOCs in the air simultaneously. Therefore, we recommend that the determination of naphthalene, the most volatile PAH, will be better when it is measured by a VOC method instead of a conventional PAH method from a viewpoint of accuracy.

• 한국환경보건학회지
• /
• 제44권1호
• /
• pp.63-75
• /
• 2018

Objectives: The aim of this research is to explore the total heavy metals from a coal-fired power plant burning bituminous coal with wood pellets due to the implementation of the Renewable Portfolio Standard policy (RPS, 10% of electricity from renewable energy resources by 2023). Methods: The research was carried out by collecting archival data and using the USEPA's AP-42 & EMEP/EEA compilation of emission factors for use in calculating emissions. The Monte Carlo method was also applied for carrying out the calculations of measurement uncertainty. Results: In this paper, the results are listed as follows. Sb was measured at 110 kg (2015) and calculated as 165 kg (2019) and 201 kg (2023). Cr was measured at 1,597 kg (2015) and calculated as 1,687 kg (2019) and 1,728 kg (2023). Cu was measured at 2,888 kg (2015) and calculated as 3,133 kg (2019) and 3,264 kg (2023). Pb was measured at 2,580 kg (2015) and calculated as 2,831 kg (2019) and 2,969 kg (2023). Mn was measured at 3,011 kg (2015) and calculated as 15,034 kg (2019) and 23,014 kg (2023). Hg was measured at 510 kg (2015) and calculated as 513 kg (2019) and 537 kg (2023). Ni was measured at 1,720 kg (2015) and calculated as 1,895 kg (2019) and 1,991 kg (2023). Zn was measured at 7,054 kg (2015) and calculated as 9,938 kg (2019) and 11,778 kg (2023). Se was measured at 7,988 kg (2015) and calculated as 7,663 kg (2019) and 7,351 kg (2023). Conclusion: This shows that most heavy metals would increase steadily from 2015 to 2023. However, Se would decrease by 7.9%. This analysis was conducted with EMEP/EEA's emission factors due to the limited emission factors in South Korea. Co-firewood pellets in coal-fired power plants cause the emission of heavy metals. For this reason, emission factors at air pollution control facilities would be presented and the replacement of wood pellets would be needed.

• 공업화학
• /
• 제34권6호
• /
• pp.670-673
• /
• 2023

수산화인회석은 생체 적합성이 뛰어나 다양한 분야에 활용이 가능하다. 그 중 약물/유전자 전달과 같은 실용적인 생물학적 응용을 수행하기 위해 인산완충식염수(PBS) 용액 속 수산화인회석의 콜로이드 안정성은 특히 중요하다. 본 연구에서는 글리세롤 용액 하에 수산화인회석을 200 ℃로 열처리하여 글리세롤이 흡착된 수산화인회석(Gly-HAP)을 합성하였다. 이를 상온에서 합성한 수산화인회석(RT-HAP) 및 증류수에서 200 ℃로 열처리된 수산화인회석(H₂O-HAP)과 물성 및 콜로이드 안정성을 비교하였다. 증류수와 글리세롤 용액 모두에서 열처리는 수산화인회석의 결정성을 향상시켰다. 하지만 글리세롤에 대한 수산화인회석의 낮은 용해도와 수산화인회석 표면에 글리세롤 분자들의 흡착으로 인해 열처리 과정에서 Gly-HAP의 결정 성장이 제한되었다. 반면에 H₂O-HAP는 초기 결정 크기에 비해 약 4배 성장하였다. RT-HAP 및 H₂O-HAP과 비교하면, Gly-HAP는 PBS 용액에서 콜로이드 안정성이 향상되었으며, 이는 글리세롤이 수산화인회석 표면에 흡착되어 HAP 결정들의 응집을 억제한 것에 기인한다.