• 제목/요약/키워드: H3 system

검색결과 8,406건 처리시간 0.041초

토양 pH가 만수국(Tagetes patula L.)의 생육 및 항산화 작용에 미치는 영향 (Effects of Soil pH on the Growth and Antioxidant System in French Marigold (Tagetes patula L.))

  • 김정배;조현제;김학윤
    • 한국자원식물학회지
    • /
    • 제20권4호
    • /
    • pp.348-352
    • /
    • 2007
  • 인위적인 토양 pH 변화가 식물에 미치는 영향과 식물의 생화학적 방어반응을 조사하고자 황산용액을 첨가하여 산성화시킨 토양(pH 5.3, 4.5, 3.9, 3.5)에 만수국을 이용하여 실험을 수행하였다. 토양 산성화에 의해 MDA 함량이 크게 증가되었다. 토양의 $H^{+}$ 부하량 증가에 따라 산화형인 DHA 및 GSSG의 함량이 크게 증가되었다. 항산화 효소의 활성도 토양의 $H^{+}$ 부하량의 증가에 따라 증가하는 것으로 나타났다.

낙동강 하류 원수의 응집제 주입 자동화를 위한 Streaming Current Detector (SCD)와 Charge Analyzing System (CAS)의 평가 (Evaluation of Streaming Current Detector (SCD) and Charge Analyzing System (CAS) for automation of coagulant dosage determination)

  • 김상구;손희종;이정규;염훈식;유평종
    • 대한환경공학회지
    • /
    • 제39권4호
    • /
    • pp.201-207
    • /
    • 2017
  • 본 연구에서는 낙동강 하류원수에 대한 응집제 주입율 자동화를 위해 stream current detector (SCD)와 charge analyzing system (CAS)의 적용성 비교 평가하였다. SCD 시스템을 이용한 경우, 원수 pH가 9.3에서 5.7로 낮아지면 pH 9.3에서 설정된 유동 전하값을 응집제 주입율로 사용할 수 없었고, pH 5.7에 맞는 유동 전하값의 재설정이 필요하였다. 원수의 pH 변화에 따른 SCD의 유동 전하값의 재설정을 하지 않을 경우, 후단의 모래여과 처리수 탁도가 증가하는 현상을 보였다. CAS 시스템의 경우는 원수 pH의 범위가 6.0~9.3의 범위일 때 polydadmac을 전하 중화제로 사용하는 것이 가능하였고, 고탁도 원수에도 poly-dadmac이 양호한 전하중화제로 평가되었다. 그러나 pH 5~11의 범위에서 polydadmac의 전하량은 거의 변화하지 않은 반면, 응집제로 사용되는 alum의 전하량은 6배 정도 차이가 발생하고, pH에 적합한 응집제 요구량을 보였다. 따라서 원수의 pH가 높은 경우는 전하 적정제로 정수장에서 사용하는 응집제를 직접 이용하는 것이 효율적이었다.

유도제어시스템을 포함한 과학위성 M-3H-3의 궤도해석 (Launch trajectory analysis of a scientific satellite M-3H-3 including guidance and control system)

  • 최재원;이장규;이승현
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
    • /
    • pp.59-64
    • /
    • 1989
  • In this paper, the launch trajectory of the Japan scientific satellite M-3H-3 from launch to orbit injection is investigated. For the terminal conditions at a guidance target point, a guidance and control system is used. An open-loop and a closed-loop guidance schemes are used simultaneously. For the closed-loop guidance scheme, the velocity polynomial algorithm represented by the velocity difference between the target point and present velocity is used. A PD control system is used for activating gimbal type engines. The simulation result shows that all the terminal position and velocity conditions are satisfied and the trajectory for the M-3H-3 scientific satellite is reasonable.

  • PDF

Effect of Mutations of Five Conserved Histidine Residues in the Catalytic Subunit of the cbb3 Cytochrome c Oxidase on its Function

  • Oh Jeong-Il
    • Journal of Microbiology
    • /
    • 제44권3호
    • /
    • pp.284-292
    • /
    • 2006
  • The cbb3 cytochrome c oxidase has the dual function as a terminal oxidase and oxygen sensor in the photosynthetic bacterium, Rhodobacter sphaeroides. The cbb3 oxidase forms a signal transduction pathway together with the PrrBA two-component system that controls photosynthesis gene expression in response to changes in oxygen tension in the environment. Under aerobic conditions the cbb3 oxidase generates an inhibitory signal, which shifts the equilibrium of PrrB kinase/phosphatase activities towards the phosphatase mode. Photosynthesis genes are thereby turned off under aerobic conditions. The catalytic subunit (CcoN) of the R. sphaeroides cbb3 oxidase contains five histidine residues (H2l4, B233, H303, H320, and H444) that are conserved in all CcoN subunits of the cbb3 oxidase, but not in the catalytic subunits of other members of copper-heme superfamily oxidases. H214A mutation of CcoN affected neither catalytic activity nor sensory (signaling) function of the cbb3 oxidase, whereas H320A mutation led to almost complete loss of both catalytic activity and sensory function of the cbb3 oxidase. H233V and H444A mutations brought about the partial loss of catalytic activity and sensory function of the cbb3 oxidase. Interestingly, the H303A mutant form of the cbb3 oxidase retains the catalytic function as a cytochrome c oxidase as compared to the wild-type oxidase, while it is defective in signaling function as an oxygen sensor. H303 appears to be implicated in either signal sensing or generation of the inhibitory signal to the PrrBA two-component system.

중수로 원전$^{14}C$ 발생 특성 및 이온교환수지에 의한 $^{14}C$$\cdot$착탈 거동 분석 (Analysis on the Generation Characteristics of $^{14}C$ in PHWR and the Adsorption and Desorption Behavior of $^{14}C$ onto ion Exchange Resin)

  • 이상진;양호연;김경덕
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2004년도 학술논문집
    • /
    • pp.147-157
    • /
    • 2004
  • CANBU형 원전에서 $^{14}C$ 핵종은 감속재 계통, 냉각재, 환형기체 및 연료 계통에서 생성된다. 이4가지 계통 중 감속재 계통이 전체 $^{14}C$ 생성의 94.8%를 차지하고 있다. $^{14}C$ 핵종은 용액 내에서 PH에 따라 용존 이산화탄소$^{14}CO_2$), 중탄산 이온($H^{14}{CO_3}^-$), 탄산 이온($^{14}{CO_3}^{2-}$) 및 탄산($H_2^{14}CO_3$)의 형태로 존재하는데, 감속재 계통에서는 PH가 5이상으로서 주로 이산화탄소($^{14}CO_2$), 탄산($H_2^{14}CO_3$) 및 중탄산 이온($H^{14}{CO_3}^-$)으로 존재한다. 본 연구에서는 월성 원전 각 계통에서 사용되고 있는 이온교환수지 현황과 년도별 폐수지 발생현황을 조사하였다. 그리고 월성 원전에서 사용되고 있는 IRN 150 수지의 탄소화합물의 흡$\cdot$탈착 특성을 살펴보기 위해, 중성 pH에서 주로 존재하는 ${HCO_3}^-$ 이온을 IRN 150 수지와 반응시켜 포화시킨 뒤, $NaNO_3$$Na_3PO_4$ 및 HC1, NaOH의 탈착용액을 선정하여 ${HCO_3}^-$ 이온의 탈착 가능성을 알아보았다. $Na^+$ 이온에 의한 $CO^{2+}$ 이온 및 $Cs^+$이온의 탈착은 거의 발생되지 않았으며, ${NO_3}^-$ 이온 및 ${PO_4}^{3-}$ 이온에 의한 ${HCO_3}^-$ 이온의 탈착은 서서히 진행되었다.

  • PDF

Annular Denuder System을 이용한 부산시 대기 중 산성오염물질의 특성 (Characteristics of Acidic Air Pollutants in Pusan Area Using an Annular Denuder System)

  • 정장표;정창용;이학성
    • 한국대기환경학회지
    • /
    • 제13권5호
    • /
    • pp.397-410
    • /
    • 1997
  • An annular denuder filter pack sampling system (ADS) was used to collect acidic air pollutants in Pusan. During the study period (from June 1995 to November 1995), forty eight samples were collected every 12 hours starting from 6:00 in the morning. These samples were devided into two sets of data for day (6:00 a.m.-6:00 p.m.) and night (6:00 p.m.-6:00 a.m.). The chemical species were analyzed for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$ in the gas Phase, and N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^{+}$ in the particulate phase. The mean concentrations measured from this study were 0.24, 1.91, 30.07 and 4.24 $\mu\textrm{g}$/㎥ for HN $O_3$, HN $O_2$, S $O_2$ and N $H_3$, respectively. The mean concentrations of N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$ and N $H_4$$^+{\ulcorner}$ were 1.95, 7.36 and 3.48 $\mu\textrm{g}$/㎥, respectively. The mean concentrations of gaseous species except for HN $O_2$ were higher in daytime than in nighttime, but the reverse was true in the particulates except for N $H_4$$^{+}$. +/..

  • PDF

염소계 화합물(TCE, PCE)로 오염된 토양 및 지하수 처리를 위한 실용적 고도산화처리시스템 개발 (I) (Development of Practical Advanced Oxidation Treatment System for Decontamination of Soil and Groundwater Contaminated with Chlorinated Solvent (TCE, PCE) : Phase I)

  • 손석규;이종열;정재성;이홍균;공성호
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제12권5호
    • /
    • pp.105-114
    • /
    • 2007
  • Advanced oxidation processes(AOPs)는 강력한 산화제인 hydroxyl radical(${\cdot}OH$)를 생성하여 오염물질을 산화시키는 기법이다. 본 연구에서는 DNAPL인 trichloroethylene(TCE)과 tetrachloroethylene(PCE)의 수리학적 특성을 고려하여 우수한 고도산화처리기법($UV/Fe^{3+}$-chelating agent/$H_2O_2$기법, $UV/H_2O_2$기법)의 적용성 평가를 실시하였다. TCE, PCE 처리에 있어 가장 높은 분해효율을 보인 기법은 $UV/H_2O_2$기법으로 pH 6의 중성조건에서 TCE의 경우 150분 만에 99.92%의 TCE 분해를 나타내었고($[H_2O_2]$ = 147 mM, UV dose = 17.4 kwh/L), PCE의 경우 반응 2시간에 99.99%가 분해되었다($[H_2O_2]$ = 29.4 mM, UV dose = 52.2 kwh/L). 또한, $UV/Fe^{3+}$-chelating agent/$H_2O_2$기법을 적용하였을 경우, TCE는 90분 만에 99.9% (UV dose = 34.8 kwh/L, $[Fe^{3+}]$ = 0.1 mM, [Oxalate] = 0.6 mM, $[H_2O_2]$ = 147 mM) PCE는 반응시간 6시간 만에 99.81% (UV dose = 17.4 kwh/L, $[Fe^{3+}]$ = 0.1 mM, [Oxalate] = 0.6 mM, $[H_2O_2]$ = 29.4 mM)의 빠른 분해경향을 보였다. 이러한 결과는 기존의 고도산화처리기법 중 modified Fenton 반응에 UV를 적용함으로서 반응 중 $H_2O_2$의 재생산을 증가시킬 수 있음을 보여주고 있다. 또한, Fe(III) 이온의 Fe(II) 이온으로의 환원을 용이하게 하여 기존 Fenton 반응에 비해 처리시간의 단축 및 분해효율의 향상을 기대할 수 있을 것이다. 그리고, oxalate나 acetate같은 저분자 유기산 착제의 적용으로 pH의 안정성과 분해효율의 향상이 가능하고, 철이온 및 oxalate나 acetate와 같은 물질이 자연상에 존재함에 따라 보다 경제적이고 친환경적인 실용적 처리기법 도출이 가능할 것이다.

지하수정호 결합 복합지열시스템의 시범운영 효과분석 (Analysis of Test Operations Effect of Open-Closed Loops Complex Geothermal System Combined with Groundwater Well)

  • 송재용;김기준;이근춘;정교철
    • 지질공학
    • /
    • 제28권3호
    • /
    • pp.475-488
    • /
    • 2018
  • 본 연구에서는 지하수 관정을 활용하고 밀폐형-개방형이 결합된 복합지열시스템(CWG 시스템)을 시설재배지에 적용하여 열원측 및 부하측의 열교환량과 투입된 전력량 대비 효율을 평가하였다. 또한, 운전 과정에서의 외기온도 및 시설재배지 온도를 평가하여 복합지열시스템 적용시의 냉난방 효과를 분석하였다. 냉방운전시 열원측 열교환량 평가결과, 약 235 L/min의 지하수가 유입되는 개방형에서 평균 90.0 kW/h, 약 85 L/min의 순환수가 유동하는 밀폐형에서 40.1 kW/h의 열교환량이 발생하였으며, 전체 열교환량은평균 130.1 kW/h로 분석되었다. 부하측에서 실질적으로 전달되는 열교환량은 평균 110.4kW/h로 평가되었다. 복합지열시스템의 냉방효율을 분석한 결과, 평균 EER는 5.63으로 분석되었다. 난방운전 시 열원측 열교환량 평가결과, 약 266 L/min의 지하수가 유입되는 개방형에서 평균 60.4 kW/h, 약 86 L/min의 순환수가 유동하는 밀폐형에서 22.4 kW/h의 열교환량이 발생하였으며, 전체 열교환량은 평균 82.9 kW/h로 분석되었다. 부하측에서 실질적으로 전달되는 열교환량은 평균 112.0 kW/h로 평가되었다. 복합지열시스템의 난방효율을 분석한 결과, 평균 COP는 3.92로 분석되었다. 외기온도와 CWG 시스템을 적용한 시설하우스 및 비교 시설하우스 내부온도와의 상관관계를 분석한 결과 30RT 용량의 CWG 시스템 하우스가 비교 하우스에 비해 외기온도 $20^{\circ}C$인 경우 $3.4^{\circ}C$, 외기온도 $25^{\circ}C$인 경우 $6.8^{\circ}C$, 외기온도 $30^{\circ}C$인 경우 $10.1^{\circ}C$, 외기온도 $35^{\circ}C$인 경우 $13.4^{\circ}C$의 온도가 저감되는 것으로 평가되었다. 이러한 결과를 볼 때, 본 시스템을 적용할 경우 일반적으로 외기온도가 $30^{\circ}C$ 이상을 보이는 여름철에 CWG 시스템을 적용하지 않은 시설재배지에 비해 약 $10^{\circ}C$ 이상의 냉방효과가 나타낼 수 있을 것으로 판단된다. 이와 같은 결과는 시설재배지의 복합지열시스템 설계에 활용될 수 있고, 다양한 조건에서의 시험성과와 종합하여 복합지열시스템의 냉난방 효과에 대한 보다 명확한 규명이 가능할 것으로 판단된다.

혼합 $H_2/H_{\infty}$제어에 의한 강인한 서보시스템의 설계 -3관성 벤치마크문제의 해법 - (Robust Servo System Design by $H_2/H_{\infty}$ Control - Application to Three Inertia Benchmark Problem-)

  • 최연욱
    • 융합신호처리학회논문지
    • /
    • 제6권3호
    • /
    • pp.148-156
    • /
    • 2005
  • 본 논문은 혼합 $H_2/H_{\infty}$ 제어를 이용한 강인한 서보시스템의 설계법을 제안하고 이것을 3관성 벤치마크문제에 적용하여 이 방법의 유용성을 확인한다. 먼저 내부모델의 원리를 이용하여 혼합 $H_2/H_{\infty}$ 제어기법을 적용할 수 있는 구조를 제안하고 이 구조의 타당성을 검토한다. 다음에 강인한 서보시스템의 설계조건을 각각 $H_2$$H_{\infty}$의 설계사양으로 분리한 뒤 제안된 혼합 $H_2/H_{\infty}$ 설계법에 적용하여 설계를 LMI이론에 의하여 실행한다. 마지막으로 3관성벤치마크 문제에서 부가된 몇 가지의 사양을 제안된 혼합 $H_2/H_{\infty}$법에 맞도록 수정한 뒤 제어기의 설계를 통한 설계사양의 만족도를 확인한다.

  • PDF

HOT CHANNEL ANALYSIS CAPABILITY OF THE BEST-ESTIMATE MULTI-DIMENSIONAL SYSTEM CODE, MARS 3.0

  • JEONG J.-J.;BAE S. W.;HWANG D. H.;LEE W. J.;CHUNG B. D.
    • Nuclear Engineering and Technology
    • /
    • 제37권5호
    • /
    • pp.469-478
    • /
    • 2005
  • The subchannel analysis capability of MARS, a multi-dimensional thermal-hydraulic system code, has been enhanced. In particular, the turbulent mixing and void drift models for the flow-mixing phenomena in rod bundles were improved. Then, the subchannel analysis feature was combined with the existing coupled system thermal-hydraulics (T/H) and 3D reactor kinetics calculation capability of MARS. These features allow for more realistic simulations of both the hot channel behavior and the global system T/H behavior. Using the coupled features of MARS, a coupled analysis of a main steam line break (MSLB) is carried out for demonstration purposes. The results of the calculations are very reasonable and promising.