• 한국분말재료학회지
• /
• 제15권4호
• /
• pp.292-296
• /
• 2008

The electromagnetic (EM) wave absorption properties of the $Fe_{73}Si_{16}B_7Nb_3Cu_1$ nanocrystalline powder mixed with 5 to 20 vol% of Ni-Zn ferrites has been investigated in a frequency range from 100MHz to 10GHz. Amorphous ribbons prepared by a planar flow casting process were pulverized and milled after annealing at 425 for 1 hour. The powder was mixed with a ferrite powder at various volume ratios to tape-cast into a 1.0mm thick sheet. Results showed that the EM wave absorption sheet with Ni-Zn ferrite powder reduced complex permittivity due to low dielectric constant of ferrite compared with nanocrystalline powder, while that with 5 vol% of ferrite showed relatively higher imaginary part of permeability. The sheet mixed with 5 vol% ferrite powder showed the best electromagnetic wave absorption properties at high frequency ranges, which resulted from the increased imaginary part of permeability due to reduced eddy current.

• 한국수소및신에너지학회논문집
• /
• 제18권3호
• /
• pp.334-341
• /
• 2007

Al film(135.5 nm thick) with Pd film(39.6 nm thick) was made by thermal evaporation method. Electrical resistance change by hydrogen absorption and desorption was measured with four point measurement method. Even though Al film(135.5 nm thick) did not absorb any hydrogen at room temperature, Al/Pd film absorbed hydrogen at upto 640 torr pressure. Hydrogen absorption kinetics was monitored by measuring resistance change of the sample in the temperature range from $25^{\circ}C$ to $40^{\circ}C$. Absorption activation energy of Al/Pd film was about 10.7 and 17.7 kcal/mol H for 1st stage and last stage respectively at 1 torr hydrogen pressure. This activation values are bigger than that of Pd film, but are much less than that of Al film. This result indicates there is possibility that Al can be storage material for hydrogen by using Pd film evaporation on it.

• 한국결정성장학회지
• /
• 제21권2호
• /
• pp.55-59
• /
• 2011

Mong Hsu rubies from Myanmar include typically the dark core and blue patch but most of the previous research has merely focused on the dark core. This work is aimed to understanding clearly the characteristic of the dark core and blue patch of Mong Hsu rubies. It was found from the FTIR analysis that the dark core and blue patch region showed the absorption peaks of boehmite ($1986\;cm^{-1}$), diaspore ($2115\;cm^{-1}$) and water ($3400{\sim}3900\;cm^{-1}$) but the absorption peaks of O-H stretching ($3309\;cm^{-1}$ and $3078\;cm^{-1}$) were found only in blue patch region. The UV-VIS-NIR analysis of the dark core region revealed the stronger absorption of $Cr^{3+}$ at 405 and 554 nm compared to the blue patch region. In range of 600~800 nm, the UV absorption characteristic at 659, 675 and 693 nm assigned to $Cr^{3+}$ of core group samples is distinct from that of blue patch. The SEM-EDS examinations disclosed the existence of lots of micro-cracks and pores in the core regions compared to blue patch region.

• 대한화학회지
• /
• 제23권3호
• /
• pp.141-151
• /
• 1979

전형적인 음이온 교환수지인 Dowex 1-X8 (50∼100메쉬)에 술폰기를 갖는 킬레이트 시약인 8-hydroxyquinoline-5-sulfonic acid (HQS)와 7-nitroso-8-hydroxyquinoline-5-sulfonic acid (NHQS)를 흡착시킨 킬레이트 수지를 사용하여 수용액에 용해되어 있는 Fe(Ⅲ), Cu(Ⅱ), Pb(Ⅱ) 및 Zn(Ⅱ)을 흡착시켜 다른 이온들로부터 분리시키는 연구를 시도한다. 킬레이트 수지의 안정성은 수용액에 공존하는 음이온의 종류, 그 농도 및 액성에 따라 영향을 받으므로 수지사용의 최적조건을 결정하였으며, 수지에 대한 두 킬레이트 시약의 흡착성도 정성적으로 해석하였다. 금속이온의 흡착은 킬레이트 수지에 있는 HWS 및 NHQS와 각 금속이온과의 킬레이트 형성에 의한 것으로 그 흡착력은 각 킬레이트의 안정도상수값과 비례한다. 액성이 PH3∼4 범위에서 HQS-수지의 금속이온의 흡착능은 Fe(Ⅲ):0.63, Cu(Ⅱ):0.82 및 Pb(Ⅱ):0.79 mmol/g이며, NHQS-수지의 경우는 Cu(Ⅱ):1.07 및 Pb(Ⅱ):0.96mmol/g이다. 몇가지 금속이온의 혼합액을 시료로 하여 분리를 시도했다.

• Applied Biological Chemistry
• /
• 제23권2호
• /
• pp.123-130
• /
• 1980

1. Sodium tetrahydrofurfuryl thiosulphate 제조(製造)에 사용(使用)하는 KI를 사용(使用)하지 않아도 무방(無妨)하다. 2. Thiamine 유도체를 제조(製造)함에있어 thiothiamine(SB_1)$에서 출발(出發)하는 방법(方法)이 $thiamine{\cdot}HCI$에서 출발(出發)하는 방법(方法)에 비(比)하여 득량(得量), 순도면(純度面)에서 손색이 없였다. 3.자외흡수(紫外吸收) spectrum의 최대흡수(最大吸收)는 TTFD는 PH 3.4에서 $244{\sim}246nm$, pH 10.9에서 $234{\sim}285nm$을, (TPD)는 pH 3.4에서 $245{\sim}246nm$, pH 10.9에서 $233{\sim}235nm$을 각각 나타내었다. 4. 적외흡수(赤外吸收) spectrum는 각흡수대(各吸收帶)가 지시(指示)하는 관능기(官能基)로써 TTFD, TPD의 화학구조(化學構造)를 지지(支持)할 수 있다. 5. Box-wilson 계획(計劃)에 따라 TTFD의 제조최적조반(製造最適條伴)은 다음과 같다. a. Thiol형(型) $B_1$의 수용액(水溶液)의 pH는 12.09 b. $B_1{\cdot}HCl$ 20g에 대하여 Bunte's salt 양(量)은 35.01g c. 반응온도(反應溫度) $15.59^{\circ}C$. 6. TTFD, TPD 원료자체정량(原料自體定量)에는 비수적정법(非水滴定法)이 좋고 그의 제제(製劑)의 정량(定量)에는 흡광도법(吸光度法)이 간편(簡便)하고 재현성(再現性)이 있었다.

• 한국산업보건학회지
• /
• 제31권2호
• /
• pp.173-183
• /
• 2021

Objectives: This study evaluated the skin permeability of lawsone in henna hair dyes to understand the exposure characteristics of henna hair dyes in the human body. It examined the protective effects of protectants by applying protectants A, B, and C to test skin. Methods: Skin absorption tests were conducted using Franz diffusion cells according to OECD test guideline 428. After applying one kind of natural henna hair dye and chemical henna hair dye, respectively, to a standardized pig skin model, samples of receptor fluid were collected at 1h, 3h, 6h, and 24h. The skin permeation of lawsone was determined using HPLC. After the skin absorption experiment, the skin to which hair dye was applied was analyzed to determine the residual amount of lawsone in the skin. Results: The cumulative permeation of both natural and chemical henna hair dyes increased over time, and the natural henna hair dye had a flux value (t=3.194, p<.05) high both in the K_p value (t=3.207, p<.05) and the residual amount (t=22.701, p<.001). For skin treated with a protectant, the cumulative permeation of natural henna hair dye 24h control and the cumulative permeation of protectant A, B, and C increased over time. Flux and K_p values were in the order control > protectant A > protectant C > protectant B. The residual amount (F=4.469, p<.05) was in the order of protectant C > protectant A > protectant B > control. At 3h, the dye application time of natural henna hair dye, the lawsone flux value (F=4.454, p<.05) and K_p value (F=4.455, p<.05) were higher in the control group than in the protectant groups. The 24h cumulative permeation of the chemical henna hair dye increased with time in both the control and the protectant groups, and the flux and K_p values were in the order of protectant A > protectant C > protectant B > control. The residual amount (F=7.901, p<.01) was in the order of protectant B > protectant A> protectant C > control. Conclusions: Within the normal dyeing time for henna hair dye (three hours for natural henna hair dyes and 30 minutes for chemical henna hair dyes) lawsone skin penetration was not observed even when no protective agent was applied. After that time, however, evidence of skin penetration and retention of lawsone and the protective effect of protective agents were observed.

• Journal of Magnetics
• /
• 제14권4호
• /
• pp.155-160
• /
• 2009

This study examined the effects of a decrease in thickness of magnetic alloy flakes on the electromagnetic wave absorption characteristics of nanocrystalline $Fe_{73.5}Cu_1Nb_3Si_{15.5}B_7$ (at.%) alloy flakes/polymer composite sheets available for a quasi-microwave band. The thickness of FeCuNbSiB alloy flakes decreased to 1-2 $\mu$m with increasing milling time up to 24 h, and the composite sheet including alloy flakes milled for 24 h exhibited considerably enhanced power loss properties in the GHz range compared to the sheets having non-milled alloy powders. Although a considerable increase in loss factor upon milling was observed in the narrow frequency range of 4-6 GHz, there was no correlation between the complex permeability and flake thickness. However, the complex permittivity increased with increasing milling time, and there was good agreement between the milling time and the frequency dependences of the complex permittivity and power loss.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.546-551
• /
• 2009

The objective of this study was to investigate Fourier transform infrared (FT-IR) spectrometry and the X-ray diffraction (XRD) characterization of melanoidins formed from glucose and fructose with amino acid enantiomers in the Maillard reaction. Before dialysis, FT-IR spectroscopy of all the samples showed that the characteristic absorption intensities appeared as a broad and intense band of the stretching vibration of the -OH group at 3,400/cm for a high pH. The absorption bands of the melanoidins sharply decreased in intensity after dialysis as compared to those before dialysis. In particular, the absorption bands at 992 and 575/cm disappeared. The XRD confirmed that the crystal structure of the melanoidins disappeared after dialysis and a new crystal structure was formed at 9 and $28^{\circ}$ ($2{\theta}$. In particular, broad diffraction peaks were formed in the $10-21^{\circ}$ ($2{\theta}$) range for a high pH, while other sharp diffraction peaks disappeared.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2004년도 춘계 학술발표회 논문집
• /
• pp.201-212
• /
• 2004

An experimental study of the absorption process of water vapor into a lithium bromide solution was performed. For the purpose of developing high performance absorption chiller/hater utilizing lithium bromide solution as working fluid, it is important to improve the performance of absorber with the larger heat transfer area of the four heat exchangers. The experimental apparatus was composed of a plate type absorber which could increase the heat exchange area per unit volume to investigate more detail characteristics instead of the conventional type, that is, horizontal tube bundle type. The size of plate absorbers were made for 0.4m$\times$0.6m and the design objective of a refrigeration capacity was 1RT. In this experiment, three kinds of plate absorbers namely flat plate, dimple plate and groove plate were used. The obtained results were less than the design objective values, that is, the refrigeration capacity was about 0.3 ～0.4RT and the overall heat transfer coefficient was 500～600 kcal/$m^2$h$^{\circ}C$ at the standard conditions.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1976-1980
• /
• 2010

A simple and reliable method has been developed to selectively separate and concentrate trace amounts of Fe(III) ions from water and food samples by using flame atomic absorption spectrometry. A new reagent, 5-hydroxy-4-ethyl-5,6-di-pyridin-2-yl-4,5-dihydro-2H-[1,2,4] triazine-3-thione, was synthesized and characterized by using FT-IR spectroscopy and elemental analysis. Effects of pH, concentration and volume of elution solution, sample flow rate, sample volume and interfering ions on the recovery of Fe(III) were investigated. The optimum pH was found to be 5. Eluent for quantitative elution was 10 mL of 2 M HCl. The preconcentration factor of the method, detection limit (3s/b, ${\mu}gL^{-1}$) and relative standard deviation values were found to be 25, 4.59 and 1%, respectively. In order to verify the accuracy of the method, two certified reference materials (TMDA 54.4 lake water and SRM 1568a rice flour) were analyzed. The results obtained were in good agreement with the certified values. The method was successfully applied to the determination of Fe(III) ions in water and food samples.