• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.133-134
• /
• 1982

This experiment has been made to investigate the absorption of watersoluble zinc chloride by Pinus densiflora S. et Z. at different moisture content, under soaking process, to decide the optimum content condition for the maximum absorption of zinc chloride by the wood tested and to investigate the concentration of zinc chloride affecting each moisture content of wood. Material was cut in the Dept. of Forest, College of Agr. S.N.U. Suwon, Korea. Sample was divided into sap and heartwood group and cut $2{\times}2{\times}2\;cm$ in size, having exact three dimensions, using the part of D.B.H. The numbers of sample were 20 pieces for each moisture content condition for both sap and heartwood. Especially, the samples were protected from exposure to keep moisture content in green condition. The ranges of moisture content tested were as the table 3 and 4. The conclusions were as follows: 1. With 3% zinc chloride solution, the rate of absorption decreased with the time increased, if the air seasoned Korean red pine (Pinus densiflora S. et Z.) was treated in steeping process. Initial absorption for 30 minutes was more than 50% of total absorpon for 24 hours. 2. Rate of absorption was same under the green condition, while rate of absorption under the moisture content 7 to 30% varied. 3. Although it was not quite proportional change in the absorption with the difference of moisture content, the great change in the absorption occured by seasoning. With exception sap green condition, sapwood twice more permeable than the heartwood in the oven dried condition and it has been observed the nearly same amount of absorption at the moisture content of 7%, 10% and 15% respectively in heartwood. 4. It was better from water in wood from view-point of absorption of zinc chloride solution, but it was difficult practically to obtain the smallest moisture content, and then it was decided that values of allowable moisture content, on the basis of mean absorption, were 15% to 20% in the sapwood, and in the heartwood, 10% to 15%. The mean absorption for each moisture content in the sap and the heartwood were as following. 5. In general, the concentration of zinc chloride after steeping was nearly same between moisture content and sap and heartwood respectively.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.130-135
• /
• 2008

The objectives of this study are to investigate the combined heat and mass transfer enhancement using binary nanofluids as the working fluids in a $H_2O$/LiBr absorber. The result of heat and mass transfer experiment with the additives(Arabicgum, 2E1H) showed that the heat and mass transfer performance of binary nanofluid with 2E1H enhanced significantly in comparison with that without additive. In the case of 0.01wt% $Al_2O_3$ binary nanofluids with 2E1H, the vapor absorption rate increased up to 77% in comparison with that without additive. The heat transfer rate of 0.01wt% $Al_2O_3$ binary nanofluids with 2E1H increased up to 19%. Based on the experimental results, it is recommended that the $Al_2O_3$ binary nanofluid be good with 2E1H to improve the heat and mass transfer performance.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.164-165
• /
• 2000

There has recently been a considerable amount of interest in two-photon(TP) processes because of their applications to 3-D optical data storage and imaging, up-conversion lasing, and optical power limiting. Recently, the role of Dithienothlophene(DTT) as $\pi$-center of two-photon absorption(TPA) molecules was reported to give a large enhancement of TPA, compared with the benzeniods counterparts.$^{[1]}$ In this report, we carried out two experiments to investigate nonlinear optical absorption of the molecules in which central DTT is attached through conjugation to either a D/D or a D/A pair at the ends, forming a D-$\pi$-D(1 and 3) or D-$\pi$-A(2 and 4) sequence(Fig.1). All the samples were prepared in solutions with the same molar concentration. (omitted)

• 분석과학
• /
• 제8권3호
• /
• pp.305-311
• /
• 1995

Salicylic acid($C_6H_4(OH)COOH=H_2A$)와 전이금속인 Fe(III) 사이에 형성되는 착물의 안정도상수를 $20^{\circ}C$, 0.1M $KNO_3$ 수용액 중에서 자외-가시선 흡수광도법 및 pH 전위차적정법으로 측정하여 문헌값($logK_f=16.48$)과 비교하였다. $H_2A$의 $pK_{a1}$과 $pK_{a2}$는 $2.92{\pm}0.08$ 및 $12.90{\pm}0.13$이며, Fe(III)-$H_2A$의 1:1 착물의 $logK_f$는 $20^{\circ}C$에서 $11.88{\pm}0.12$였다.

• 대한화학회지
• /
• 제50권2호
• /
• pp.99-106
• /
• 2006

3-(2-thenoyl) 3-(p-NO2-phenylhydrazone) ethyl pyruvate(I), p-Br(II) 및 p-CH3(III)의 에탄올 용액의 전자흡수 스펙트럼을 조사하여 스펙트럼이 전자 전이에 해당하는 4개의 흡수띠로 구성되어 있음을 알았다. 이들 화합물의 pK 값을 분광광도법 및 pH 측정법으로 조사한 결과, 화합물(I)의 변색 범위는 페놀프탈레인과 유사한 8~10으로, 산-염기 지시약으로 사용될 수 있음을 알았다. 몇 가지 전이원소 (Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), UO2(II), La(III) 및 Zr(IV))와 이들 화합물과의 연속안정도상수를 pH 법으로 조사하여 본 결과, 모든 금속과 몰 비 1:1 및 1:2 (M: L)의 화학양론적 착물을 형성하며, 세 가지 유도체의 pK 값과 착물의 안정도 상수(log K)의 순서는 III > II > I 임을 알았다. 또한 전도도법 적정을 수행하여 이 적정이 금속이온과 리간드를 정량하는데 사용할 수 있음을 알았다.

• 대한설비공학회지:설비저널
• /
• 제19권3호
• /
• pp.154-163
• /
• 1990

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.18-22
• /
• 2008

The electromagnetic (EM) wave absorption properties with a variation of crystallization annealing temperature have been investigated in a sheet-type absorber using the $Fe_{73}Si_{16}B_7Nb_3Cu_1$ alloy powder. With increasing the annealing temperature the complex permeability (${\mu}_r$), permittivity (${\varepsilon}_r$) and power absorption changed. The EM wave absorber shows the maximum permeability and permittivity after the annealing at $610^{\circ}C$ for 1 hour, and its calculated power absorption is above 80% of input power in the frequency range over 1.5 GHz.

• 설비공학논문집
• /
• 제8권3호
• /
• pp.351-360
• /
• 1996

This study focuses on the development and evaluation of the high efficiency absorption chiller-heater, which can be applied to a direct gas fired, double effect system with 40RT (508,000kJ) cooling capacity. The performance of the absorption chiller-heater is investigated through cycle simulation and experiment to obtain the system characteristics with the inlet tenperature of cooling, chilled water, and gas input flow rate. The efficiency of the different cycles has been studied and the simulation and experiment results show that higher coefficient of performance could be obtained for mixed flow cycle. The five percent difference was obtained from the comparison between experimental and cycle simulation results. As a result of this study, the optimum designs were determined based on the operating conditions and the coefficient of performance.

• Archives of Pharmacal Research
• /
• 제17권3호
• /
• pp.182-189
• /
• 1994

The effect of lipophilicity on the mechanisms of drug absorption through biomembranes was investigated empolying HPLC system and the fluorescence technique. Human erythrocyte ghost membranes were used as a model biomembrane. A series of four parabens (methyl, ethyl, rpopyl, and butyl) and p-hydroxybenzoic acid were used as the model drugs for lipophilicities and their partition coefficients were measured in Sorensen's phosphate buffer solution (pH 5)/octanol system. Absorption amount of parabens through erythrocyte ghost membranes increased with an increase of lipophilicity resulted from the addition of methylene group to the n-alkyl chain of parabens. And the effect of parabens on the fluidity of ghost membrane also increased with an increase of their lipophilicities.

• 한국수산과학회지
• /
• 제9권3호
• /
• pp.169-175
• /
• 1976

해수중 ppb 정도의 카드뮴, 구리, 납, 아연 및 수은 정량을 위한 용매추출-원자흡광법 및 환원기화법에 의한 무염원자흡광법을 검토했다. 용매추출 때의 최적 pH는 pH4-7였으며 용매로는 MIBK가 가장 효율이 좋았으며 킬레이트제로는 DDTC가 APDC보다 추출율 및 기타 조건이 유리했다. 즉 $1\iota$ 해수를 사용하여 pH4-5에서 DDTC-MIBK로 추출하여 아세칠렌-공기불꽃 중에 흡입시켜 흡광도를 측정하는 방법으로 해수시료를 분석한 결과 정밀저는 표준편차로 카드뮴 0.058 ppb, 구리 0.084 ppb, 납 0.44ppb였다, 아연은 $1\iota$ 시수를 사용했을 때는 블랭크값이 녀무 크게 나오고 그 정밀도가 극히 좋지 않았다. 시수량을 200ml로 했을 때는 비교적 정밀도가 좋았으며 표준편차로서 2.49 ppb였다. 수은은 시수 500ml을 황산-과망간산칼리움 분해법으로 분해시켜 염화제1주석으로 수은을 환원기화시켜 흡광도를 측정했으며 그 정밀도는 0.005 ppb였다. 이상의 방법으로 측정할 수 있는 각 금속의 정량감도는 카드뮴 $0.08\;ppb/\%$, 구리$0.15\;ppb/1\% $, 납 $0.6\;ppb/1\%$, 아연 $1.2\;ppb/1\%$, 수은 $0.01\;ppb/1\%$였다. 채수후 분석시까지의 시수보관에 따른 각 금속의 농도변화는 시수$1\iota$에 대해 질산 10ml 정도 넣어 pH 1.5 부근으로 하며 플리에칠렌병에서 보관한 결과 카드뮴, 구리, 납, 수은은 30일정도 까지는 안정하였으며 아연은 불규칙한 심한 변동을 보였다.