• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1109-1113
• /
• 1999

sothemal reduction at $50^{\circ}C$ using $Pt/MoO_3$ or $Pt/MoO_3/SiO_2$ made by dry impregnation or physical mixture of $Pt^{\circ}$ and $MoO_3$ demonstrated that the $H_2$ uptake vis $H_2$ spillover from Pt into $MoO_3$ was enhanced as calcination temperature was increased. Surface area of exposed Pt crystallites measured by CO chemisorption was decreased with higher calcination temperature. In addition, TEM showed that $MoO_x$ overlayers were formed on Pt crystallites after calcination at $400^{\circ}C$. Consequentially, it was found that this increased active contact sites between Pt and $MoO_3$ due to surface morphological change was one of the dominant factors for this increased $H_2$uptake via $H_2$ spillover from Pt crystallites into $MoO_3$.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.7
• /
• pp.401-409
• /
• 2003

This paper describes the design and the performance analysis of an $H_2$ controller for noncollocated active vibrating systems. An experiment for the active vibration control of a flexible structure is performed. The experimental model used is a cantilever beam controlled by an active damping system consisting of a laser sensor and an electromagnetic actuator. The $H_2$ controller design is based on the reduced order model and the designed system is capable of attenuating vibration without causing spillover instability. The design procedure to prevent spillover instability is described via the sensitivity analysis. The performances of the controller are verified by experimental results.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.861-868
• /
• 1996

Skeletal isomerization reaction known as exothermic reaction shows possible maximum yield of i-butene from n-butene at $110^{\circ}C$ over $Pt/MoO_3/SiO_2$. Compared with conventional catalyst such as silica, zeolite, alumina etc., $Pt/MoO_3/SiO_2$ demonstrates higher yield while by-products except 2-butene do not form. Faster H spillover rate over $Pt/MoO_3/SiO_2$ is demonstrated via isothermal reduction experiment at $110^{\circ}C$ compared to the rate over $Pt/MoO_3/Al_2O_3$. Overall isomerization rates are proportional to higher spillover rates from Pt onto $MoO_3$ surface. The skeletal isomerization reaction is composed of two elementary steps. First, carbonium ion formation over Pt crystallites by H spillover. Second, carbenium ion formation over $MoO_3$ followed by formation of i-butene. Moreover, it is suggested that H spillover step from Pt surface onto $MoO_3$ is assumed to be the rate determining step and control the overall isomerization rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.1
• /
• pp.34-37
• /
• 2004

Effect of $H_2$ spillover rate as functon of calcination temperature on reaction kinetics was evaluated. Reaction kinetics including yield, conversion and selectivity of 1-butene isomerization over $Pt/HxMoO_3/SiO_2$ were measured as reaction temperature was increased. While conversion of 1-butane was decreased, yield of iso-butene was increased. Two kinds of reaction mechanism were proposed from the change of selectivity as function of temperature.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.7
• /
• pp.401-401
• /
• 2003

This paper describes the design and the performance analysis of an Ha controller for noncollocated active vibrating systems. An experiment for the active vibration control of a flexible structure is performed. The experimental model used is a cantilever beam controlled by an active damping system consisting of a laser sensor and an electromagnetic actuator. The $H_2$ controller design is based on the reduced order model and the designed system is capable of attenuating vibration without causing spillover instability, The design procedure to prevent spillover instability is described via the sensitivity analysis. The performances of the controller are verified by experimental results.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.5
• /
• pp.377-385
• /
• 2008

In this study, we demonstrated that, although hydrogen molecules can be adsorbed onto the adsorbent such as MOF and MC itself, the loading of noble metal such as Pt is necessary to enhance the $H_2$ storage capacity since $H_2$ molecules can be dissociatively adsorbed on Pt metal and migrated to high-surface-area adsorbent via the primary spillover. In addition, the hybrid material have been prepared coupling MOF-5 with Pt/MC through carbon bridges formed by sucrose polymerization/carbonization. That this material showed the highest $H_2$ uptake at room temperature and about 100 bar is believed to be associated with the secondary spillover effect. Thus, such a strategy is very promising in developing $H_2$ storage technology using porous adsorbents. However, further experiments should be carried out to explore the choice of bridge carbon, the hybridization method, the dispersion technique of noble metals, etc.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.4
• /
• pp.331-336
• /
• 2009

수소가 Pt/$MoO_3$로 흡장되는 현상을 XRD, TEM, CO 화학흡착 분석방법을 사용하여 조사하였다. 소성과정은 Pt/$MoO_3$ 촉매의 Chlorine 함유량을 감소하며 박막을 형성하였다. 소성전과 비교하여 수소 흡장량은 소성 후에 증가하였다. Orthorhombic Pt/$MoO_3$은 Hexagonal Pt/$MoO_3$보다 항상 수소 흡장량이 증가하였다. 상대적으로 Hexagonal Pt/$MoO_3$에서 수소 흡장량이 감소하는 이유는 Hexagonal 결정격자 내에 존재하는 $NH_4^+$ 이온에 기인하는 것으로 판단된다. 결정격자 내부로의 수소 침투시 암모니움 이온이 수소내부 기공에 장애물 역할을 하므로, 수소 흡장량이 감소하는 것으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.59.6-59
• /
• 2002

$\textbullet$ An experiment for the active vibration control of a cantilever beam is performed. $\textbullet$ An active damping system consisting of a laser sensor and an electromagnetic actuator. $\textbullet$ The design procedure and the performance analysis of an H2 controller for non-collocated systems. $\textbullet$ Simulations and experiments are performed to verify the performances of the controller. $\textbullet$ The optimal H2 controller is designed based on a reduced order model. $\textbullet$The Sensitivity function is introduced to analyze the Spillover phenomenon. $\textbullet$ Active vibration control, Cantilever beam, H2 controller, spillover, Non-collocated system.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.280-283
• /
• 2004

Effect of H2 spillover rate as function of reduction temperature on reaction kinetics was evaluated. Reaction kinetics including yield, conversion, activation energy and selectivity of 1-butene isomerization over Pt/HxMoO/SiO were measured as reaction temperature was increased. While conversion of 1-butane was decreased, yield of iso-butene was increased. Two kinds of reaction mechanism were proposed from the change of selectivity as function of temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.4
• /
• pp.282-285
• /
• 2004

Kinetics of H-spillover over $Pt/MoO_3$ was greatly affected by the amount of residual chlorine differing by calcination temperature. Multifacetted techniques for characterization were dedicated to elucidate the faster reduction of chlorine in the isothermal reduction (ITR) at $50^circ{C}$ after calcination. Reduction of residual chlorine over Platinum resulted in opening the more channel of hydrogen pathway into more $MoO_3$ particles and controlling the kinetics of hydrogen uptake.