• 제목/요약/키워드: H.N.C

검색결과 8,667건 처리시간 0.04초

N-(benzenesulfonyl)-C-(N-methylanilino)imidoyl Chloride 유도체의 가수분해 반응 메카니즘 (Hydrolysis Mechanism of N-(benzenesulfonyl)-C-(N-methylanilino)imidoyl Chloride Derivatives)

  • 권기성;송윤이
    • 대한화학회지
    • /
    • 제39권8호
    • /
    • pp.650-656
    • /
    • 1995
  • 25$^{\circ}C$의 50%(v/v) 메탄올-물의 혼합용매 속에서 N-(benzenesulfonyl)-C-(N-methylanilino)imidoyl Chloride 유토체의 가수분해 반응 속도 상수를 자외선 분광광도법으로 측정하여 반응속도식, 치환기효과, 용매효과, 염효과, 열역학적 할성화 파라미터 및 가수분해 생성물의 분석 등의 결과로부터 pH9.0 이하의 범위에서는 azocarbonium ion 중간체를 지나는 $S_N1$형 반응, pH 10.0 이상의 pH에서는 사면체 중간체를 지나는 친핵성 첨가-제거반응($Ad_{N-E}$)이 일어남을 제안하였다.

  • PDF

세리아가 첨가된 니켈/칼슘 하이드록시 아파타이트 촉매 상의 부탄 부분산화 연구 (Partial oxidation of n-butane over ceria-promoted nickel/calcium hydroxyapatite)

  • 곽정훈;이상엽;김미소;남석우;임태훈;홍성안;윤기준
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 추계학술대회 논문집
    • /
    • pp.89-92
    • /
    • 2007
  • Partail oxidation(POX) of n-butane was investigated in this research by employing ceria-promoted Ni/calcium hydroxyapatite catalysts ($Ce_xNi_{2.5}Ca_{10}(OH)_2(PO_4)_6$ ; x = $0.1{\sim}0.3$) which had recently been reported to exhibit good catalytic performance in POX of methane and propane. The experiments were carried out with changing ceria content, $O_2/n-C_4H_{10}$ ratio and temperature. As the $O_2/n-C_4H_{10}$ feed ratio increased up to 2.75, n-$C_4H_{10}$ conversion and $H_2$ yield increased and the selectivity of methane and other hydrocarbons decreased. But with $O_2/n-C_4H_{10}$ = 3.0, $n-C_4H_{10}$ conversion and $H_2$ yield decreased. This is considered due to that too much oxygen may inhibit the reduction of Ni or induce the oxidation of Ni, which results in poor catalytic activity. The optimum $O_2/n-C_4H_{10}$ ratio lay between 2.50 and 2.75. $Ce_{0.1}Ni_{2.5}Ca_{10}(OH)_2(PO_4)_6$ showed the highest $n-C_4H_{10}$ conversion and $H-2$ yield on the whole. In durability tests, higher hydrogen yield and better catalyst stability were obtained with the $O_2/n-C_4H_{10}$ ratio of 2.75 than with the ratio of 2.5.

  • PDF

Valproic Acid Induces Transcriptional Activation of Human GD3 Synthase (hST8Sia I) in SK-N-BE(2)-C Human Neuroblastoma Cells

  • Kwon, Haw-Young;Dae, Hyun-Mi;Song, Na-Ri;Kim, Kyoung-Sook;Kim, Cheorl-Ho;Lee, Young-Choon
    • Molecules and Cells
    • /
    • 제27권1호
    • /
    • pp.113-118
    • /
    • 2009
  • In this study, we have shown the transcriptional regulation of the human GD3 synthase (hST8Sia I) induced by valproic acid (VPA) in human neuroblastoma SK-N-BE(2)-C cells. To elucidate the mechanism underlying the regulation of hST8Sia I gene expression in VPA-stimulated SK-N-BE(2)-C cells, we characterized the promoter region of the hST8Sia I gene. Functional analysis of the 5'-flanking region of the hST8Sia I gene by the transient expression method showed that the -1146 to -646 region, which contains putative binding sites for transcription factors c-Ets-1, CREB, AP-1 and NF-${\kappa}B$, functions as the VPA-inducible promoter of hST8Sia I in SK-N-BE(2)-C cells. Site-directed mutagenesis and electrophoretic mobility shift assay indicated that the NF-${\kappa}B$ binding site at -731 to -722 was crucial for the VPA-induced expression of hST8Sia I in SK-N-BE(2)-C cells. In addition, the transcriptional activity of hST8Sia I induced by VPA in SK-N-BE(2)-C cells was strongly inhibited by SP600125, which is a c-Jun N-terminal kinase (JNK) inhibitor, and $G{\ddot{O}}6976$, which is a protein kinase C (PKC) inhibitor, as determined by RT-PCR (reverse transcription-polymerase chain reaction) and luciferase assays. These results suggest that VPA markedly modulated transcriptional regulation of hST8Sia I gene expression through PKC/JNK signal pathways in SK-N-BE(2)-C cells.

배가스로부터에틸렌 회수를 위한 활성탄과 CMS 흡착탑의 흡착거동 특성 (Adsorption Dynamics of Activated Carbon and Carbon Molecular Sieve Beds for Ethylene Recovery)

  • 윤기용;전필립;우은지;;이창하
    • Korean Chemical Engineering Research
    • /
    • 제50권3호
    • /
    • pp.527-534
    • /
    • 2012
  • FCC 연료가스로부터 에틸렌 회수를 위한 흡착공정을 개발을 위하여 활성탄(AC)과 탄소분자체(CMS)로 충진된 흡착탑의 흡착 동특성을 비교하였다. FCC 연료가스로는 6성분($CH_4/C_2H_4/C_2H_6/C_3H_6/N_2/H_2$,32:15:14:2:12:25 vol.%) 혼합가스를 이용하였으며, 흡착탑의 흡착 및 탈착파과 실험을 실시하였다. 활성탄 흡착탑의 경우 파과는 $H_2$ < $N_2$ < $CH_4$ < $C_2H_4$ < $C_2H_6$ 순서로 나왔으며, CMS 흡착탑의 경우는 $H_2$< $CH_4$ < $N_2$ < $C_2H_6$ < $C_2H_4$ 순서를 보였다. CMS 흡착탑은 활성탄 흡착탑보다 성능이 나쁘나, 속도분리의 특성으로 $CH_4$$N_2$뿐만 아니라 활성탄에서 제거하기 어려운 $C_2H_6$ 이상의 성분들을 흡착단계에서 제거할 수 있다. 흡착탑의 재생은 감압과정만으로는 두 흡착제 충진탑에서 충분히 재생되기 어려우며, 진공재생이 필요하다. 따라서 CMS를 이용하는 흡착공정은 전처리 공정으로 설계하고, 활성탄을 이용하는 흡착공정을 주요 분리기로 설계하는 압력진공순환식 흡착공정(PVSA)이 에틸렌 회수에 제안될 수 있다.

피리딘과 할로겐 또는 할로겐간 화합물 사이의 전하이동 착물생성에 관한 열역학적 연구 (The Thermodynamics of the Formation of Pyridine-Halogen and Interhalogens Charge Transfer Complexes)

  • 권오천;경진범;최기준
    • 대한화학회지
    • /
    • 제26권6호
    • /
    • pp.363-368
    • /
    • 1982
  • 피리딘과 요오드, 일브롬화요오드 및 일염화요오드 사이에 생성되는 전하이동 착물을 사염화탄소 용액내에서 자외선 분광 광도법을 사용하여 연구한 결과$ C_5H_5N{\cdot}I_2}$, $ C_5H_5N{\cdot}IBr$$ C_5H_5N{\cdot}ICl$형의 1:1 분자 착물이 생성됨을 알았다. 이들 착물 생성에 대한 흡수최대는 온도가 상승함에 따라 blue shift 되므로 이를 고려하여 각 온도에서의 평형 상수와 흡광계수를 구하였다. 이 값으로부터 이들 착물 생성에 대한 ${\Delta}H$, ${\Delta}D$${\Delta}S$의 열역학적 파라미터를 산출하였다. 이 결과 착물의 상대적 안정도가 다음과 같은 순서로 됨을 알 수 있었다. $ C_5H_5N{\cdot}I_2$ < $ C_5H_5N{\cdot}IBr$ < $ C_5H_5N{\cdot}ICl$ 이 순서는 피리딘에 대한 그들의 상대적 산성도를 의미하며 전자수용체의 편극율 및 할로겐 원자의 전기 음성도의 차이에 의하여 설명될 수 있다.

  • PDF

Sodium Sulfisoxazole Hexahydrate의 결정 및 분자구조와 수소결합에 관한 연구 (The Crystal and Molecular Structure of Sodium Sulfisoxazole hexahydrate)

  • 박영자;구정회
    • 대한화학회지
    • /
    • 제20권1호
    • /
    • pp.19-34
    • /
    • 1976
  • Sodium sulfisoxazole hexahydrate, $C_{11}H_{12}N_3O_3SNa{\cdot}6H_2O$의 결정 및 분자구조를 X-선 회절법으로 해명하였다. 이 화합물의 결정은 공간군 $P2_1/c$에 속하는 단사형으로 a = 15.68(3), b = 7.70(2), c = $17.94(4){\AA}$, ${\beta}$ = $118(2)^{\circ}$ and Z = 4이다. Weissenberg 사진 촬영으로 얻은 회절반점의 총수는 1717개이며 중원자법을 적용하여 구조해명을 한 후 최소 자승법으로 정밀화하였으며 최종 R값은 0.14이다. Benzene ring과 isoxazole ring은 평면구조를 가지며 서로 $60^{\circ}$의 각을 이루고 있다. 나트륨 원자는 다섯개의 물의 산소 원자들과 N(1)으로 만들어진 찌그러진 팔면체로 배위되어 있다. 분자들은 결정내에서 14개의 서로 다른 종류의 수소결합으로 결합되어 있다. 여섯종류의 $O-H{\cdots}O-H$, 세종류의 $O-H{\cdots}O,$ 두종류의 $O-H{\cdots}N$및 각각 한종류의 $N-H{\cdots}O,$ $O-H{\cdots}N$, $N-H{\cdots}O-H$ 수소결합들이며 그 길이는 2.71에서 $3.04{\AA}$까지이다.

  • PDF

열교환기 효율이 초저온 냉동사이클 성능에 미치는 영향 (Effect on Heat Exchangers Efficiency on Performance of Cryogenic Refrigeration Cycles)

  • 윤정인
    • 동력기계공학회지
    • /
    • 제17권4호
    • /
    • pp.58-63
    • /
    • 2013
  • This paper presents the new cascade liquefaction cycles using $CO_2-C_2H_6-N_2$ and $CO_2-N_2O-N_2$. The performance of the cascade liquefaction cycles with respect to temperature differences in the LNG heat exchangers is analyzed using HYSYS software and then compared the performance of these cycles with phillips optimized cascade liquefaction cycle. The coefficient of performance of the new liquefaction cycles considered in this study decreases with the temperature differences in the LNG heat exchangers, but the compressor work, expander work and heat capacity in the LNG heat exchanger increases, respectively. From the comparison of performance of three cycles, the cascade liquefaction cycles using $CO_2-C_2H_6-N_2$ showed the highest COP. And the cycles using $CO_2-C_2H_6-N_2$ and $CO_2-N_2O-N_2$ presented the second and third highest COP, respectively. In the view of performance, the optimized cascade liquefaction cycle using $C_3H_8-C_2H_4-C_1H_4$ yields much better COP. But, in the environment view, it is found that the cascade liquefaction cycle using $CO_2-C_2H_6-N_2$ shows favorable characteristics.

Coated $Si_3N_4$-TiC Ceramic 공구의 마모 특성 (Wear Characteristics of Coated $Si_3N_4$-TiC Ceramic Tool)

  • 김동원;권오관;이준근;천성순
    • Tribology and Lubricants
    • /
    • 제4권2호
    • /
    • pp.44-51
    • /
    • 1988
  • Titanium carbide(TiC), Titanium nitride(TiN), and Titanium carbonnitride(Ti(C,N)) films were deposited on $Si_3N_4$-TiC composite cutting tools by chemical vapor deposition(CVD) using $TiCl_4-CH_4-H_2$, $TiCl_4-N_2-H_2$, and $TiCl_4-CH_4-N_2-H_2$ gas mixtures, respectively. The experimental results indicate that TiC coatings compared with TiN coatings on $Si_3N_4$ -TiC ceramic have an improved microstructural property, good thermal shock resistance, and good interfacial bonding. However TiN coatings compared with TiC coatings have a low friction coefficient with steel and good chemical stability. It is found by cutting test that coated insert compared with $Si_3N_4$-TiC ceramic have a superior flank and crater wear resistance. And multilayer coating compared with monolayer coating shows a improved wear resistance.

Characterizations of some real hypersurfaces in a complex space form in terms of lie derivative

  • Ki, U-Hang;Suh, Young-Jin
    • 대한수학회지
    • /
    • 제32권2호
    • /
    • pp.161-170
    • /
    • 1995
  • A complex $n(\geq 2)$-dimensional Kaehlerian manifold of constant holomorphic sectional curvature c is called a complex space form, which is denoted by $M_n(c)$. A complete and simply connected complex space form is a complex projective space $P_nC$, a complex Euclidean space $C^n$ or a complex hyperbolic space $H_nC$, according as c > 0, c = 0 or c < 0. Takagi [12] and Berndt [2] classified all homogeneous real hypersufaces of $P_nC$ and $H_nC$.

  • PDF

아데닌, 우라실, 시토신 및 말로네이트 배위자를 가진 팔라듐(II) 착물의 합성과 그 성질 (Synthesis and Characterization of Pd(II) Complexes with Adenine, Uracil, Cytosine and Malonate Ligands)

  • 오상오;모성종
    • 대한화학회지
    • /
    • 제30권3호
    • /
    • pp.320-326
    • /
    • 1986
  • 몇몇 백금(II) 착물과 팔라듐(II) 착물에 잠재적인 항종양 활성이 있다고 보고 되었다. 그러나 백금(II) 착물들은 항종양제로서 독성이 있으므로 본 연구에서는 아데닌, 우라실, 시토신 및 말로네이트 배위자를 포함한 팔라듐(II) 착물에 관심을 가지고 합성하였다. 팔라듐(II)와 배위자와의 반응은 수용액 상태에서 연구하였으며, $[Pd(en)(C_5H_5N_5)_2](NO_3)_2,\;[Pd(en)(C_4H_3N_2O_2)Cl],\;[Pd(en)(C_4H_5N_3O)_2](NO_3)_2{\cdot}(C_4H_5N_3O)$$[Pd(en)(C_3H_2O_4)]$ 분자식의 형태로 분리하였다. 이들 화합물들은 원소분석 및 질량분석 및 질량분석으로부터 존재 원소의 함량과 분자식을 추정하였으며, 적외선 스펙트럼과 전자 스펙트럼으로부터 금속과 배위자의 결합 및 전자이동에 대해서 조사하였다.

  • PDF