• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.332-335
• /
• 1999

The purpose of this study is to make clear that the relationship between the directional properties of late arriving sound and listener envelopment (LEV). Psycho-acoustical experiments are performed with an objective measure of inter-aural cross-correlation(IACC) in order In predict whether LEV is perceived equally in two kinds of sound fields with horizontal or vertical component of late arriving sound. It is found that LEV is affected by not horizontal component of late arriving sound but also vertical one.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.3
• /
• pp.323-332
• /
• 1997

It was reported by some researchers that two-stage parallel-plate ESPs, commonly called electronic air cleaners, show decreasing behavior of collection efficiency as particle size decreases below about $0.03{\mu}m$. This phenomenon is attributed to partial particle charging characteristics, where some of incoming particles are not charged in the charging cell of 2-stage parallel-plate ESP. One way to improve the decreasing collection efficieny in that particle size range is to enforce particle charging quantity in the charging cell. In the present study, in order to do this a 2-wire series-type charging cell modified from a 1-wire normal-type one was suggested and investigated theoretically and experimentally concerning improvement of the collection efficiency. It was confirmed from the experimental and theoretical works that the collection efficiency was apparently improved.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.4
• /
• pp.326-332
• /
• 2008

In this work CdS films were prepared by using chemical bath deposition, which is simple and inexpensive technique suitable for large deposition area. Annealing in air at different temperatures (300, 350, 400, 450 and $500^{\circ}C$) at constant time of 30 min, also for different times (15, 30, 45, 60 and 90 min) at constant temperature ($300^{\circ}C$) is achieved. X-Ray analysis has confirmed the formation of cadmium oxide (CdO) with slight increase in grain size, shift towards lower scattering angle due to relaxation in the tensile strain for deposition films, and structure change from cubic and hexagonal to the hexagonal. From electrical properties, significant increase in electrical conductivity appeared in samples annealed at $300^{\circ}C$ for 60 min, and at $350^{\circ}C$ for 30 min.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.332-333
• /
• 2010

The 5kW SOFC(Solid Oxide Fuel Cell) System is composed to 3kW parallel Fuel Cell. We propose to the parallel control of 5kW PCS in the unbalance condition of fuel cell. The developed 5kW PCS can be found control ability of DC/DC converters in the operating conditions of the unbalanced parallel operation. It is verify to the control characteristics by simulation and experiment.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.329-332
• /
• 2004

Cast-forging process has a lot of advantages in terms of saving materials along with enhancement of mechanical properties. Therefore, this process has been taken as one of candidate process to manufacturing automotive suspension parts. Since most of cast-forging parts are made with using Al-Si alloys of high castability, the mechanical properties largely depends on the primary ${\alpha}$ and eutectic Si particles. During hot forging step these microstructural features evolve with strain increment. In the present study, the mechanical property evolution was investigated in terms of microstructual evolution with strain. Specially, fracture behavior of A356 alloy was studied to find out how to improve the mechanical properties.

• Korean Journal of Pharmacognosy
• /
• v.30 no.3
• /
• pp.332-334
• /
• 1999

Corydalis Tuber has been used in traditional medicine for an analgesic, antispasmodic and gastric ulcers. For the quality control on this drug, isolation and quantitative determination of berberine and coptisine from Corydalis ternata Nakai (Papaveraceae) has been conducted by using HPLC method. Berberine and coptisine in quarternary alkaloidal fraction from the crude drug were separated on silicagel column using a $CHCl_3:MeOH\;(85:15)$ and $CHCl_3:MeOH:H_2O\;(70:30:4)$ as an eluent, and the average contents were about 0.93 and 0.36%.

• Fibers and Polymers
• /
• v.3 no.2
• /
• pp.55-59
• /
• 2002

The thermal reaction of acetoacetanilide in the presence of aniline or phenol yielded carbanilide in quantitative yields. This reaction was applied to the synthesis of polyurea. Bisacetoacetamides were prepared from diamines and diketene in DMF. They were thermally polymerized in the presence of phenol or a diamine (6FDA) to yield polyureas of low molecular weights. The polymers were soluble in DMSO and NMP. $^1{H-NMR}$ analysis showed that they had amino group terminated structures. Poly(urea-imide) was synthesized by the reaction of an oligourea diamine with pyromellitic dianhydride in NMP. The concentration of terminal amino groups was determined by an acid-base titration. The thermal property of poly(urea-imide) was evaluated by thermogravimetric analysis (TGA). Initial decompisition took place at 332-$350^{\circ}C$.

• YAKHAK HOEJI
• /
• v.33 no.6
• /
• pp.324-332
• /
• 1989

Drug release from sulfanilamide granules coated with a polyelectrlyte complex of sodium tripolyphosphate and chitosan was studied. The coating film thickness increased with increasing concentration of chitosan in the coating solution and the drug release rates of the coated granules were significantly reduced comparing with those of the uncoated granules. $T_{50%}$ of the uncoated granules was 6 minutes, but those of the granules coated with chitosan-sodium tripolyphosphate from 0.5, 0.7, and 0.9% (w/v) chitosan-HCl solution were 27, 135, and 180 minutes, respectively in distilled water. In dissolution medium at pH 6.8, $T_{50%}$ of the uncoated granules was 4 minutes, but those of the granules coated with chitosan-sodium tripolyphosphate from 0.5, 0.7, and 0.9(w/v)% chitosan-HCl solution, were 32, 135, and 160 minutes, respectively.

• IMMUNE NETWORK
• /
• v.14 no.6
• /
• pp.328-332
• /
• 2014

Dexamethasone (Dex) was shown to inhibit the differentiation, maturation, and antigen-presenting function of dendritic cells (DC) when added during DC generation or maturation stages. Here, we examined the direct effects of Dex on MHC-restricted antigen processing. Macrophages were incubated with microencapsulated ovalbumin (OVA) in the presence of different concentrations of Dex for 2 h, and the efficacy of OVA peptide presentation was evaluated using OVA-specific CD8 and CD4 T cells. Dex inhibited both class I- and class II-restricted presentation of OVA to T cells; this inhibitory effect on antigen presentation was much more potent in immature macrophages than in mature macrophages. The presentation of the exogenously added OVA peptide SIINFEKL was not blocked by Dex. In addition, short-term treatment of macrophages with Dex had no discernible effects on the phagocytic activity, total expression levels of MHC molecules or co-stimulatory molecules. These results demonstrate that Dex inhibits intracellular processing events of phagocytosed antigens in macrophages.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.332-333
• /
• 2006

The driving forces and the probable processes of WC-Co grain growth are reanalysed from recent data of interface energy and microstructure. Grain growth is driven by the disappearing of the high energy WC/WC and WC/Co interfaces with habit planes different from {0001}, ${10\bar{1}0}$ and ${11\bar{2}0}$ facets and by the area decrease of the WC/WC and WC/Co interfaces with {0001} and ${10\bar{1}0}$ habit planes. Grain growth mainly results of dissolution-precipitation. Abnormal grains are likely formed by defects assisted nucleation.