• Mycobiology
• /
• v.48 no.5
• /
• pp.351-363
• /
• 2020

Here, we investigated fungal microbiota in the understory root layer of representative well-conserved geographically segregated natural wetlands in the Korean Peninsula. We obtained 574,143 quality fungal sequences in total from soil samples in three wetlands, which were classified into 563 operational taxonomic units (OTU), 5 phyla, 84 genera. Soil texture, total nitrogen, organic carbon, pH, and electrical conductivity of soil were variable between geographical sites. We found significant differences in fungal phyla distribution and ratio, as well as genera variation and richness between the wetlands. Diversity was greater in the Jangdo islands wetland than in the other sites (Chao richness/Shannon/Simpson's for wetland of the Jangdo islands: 283/6.45/0.97 > wetland of the Mt. Gariwang primeval forest: 169/1.17/0.22 > wetland of the Hanbando geology: 145/4.85/0.91), and this variance corresponded to the confirmed number of fungal genera or OTUs (wetlands of Jangdo islands: 42/283> of Mt. Gariwang primeval forest: 32/169> of the Hanbando geology: 25/145). To assess the uniqueness of the understory root layer fungus taxa, we analyzed fungal genera distribution. We found that the percentage of fungal genera common to two or three wetland sites was relatively low at 32.3%, while fungal genera unique to each wetland site was 67.7% of the total number of identified fungal species. The Jangdo island wetland had higher fungal diversity than did the other sites and showed the highest level of uniqueness among fungal genera (Is. Jangdo wetland: 34.5% > wetland of Mt. Gariwang primeval forest: 28.6% > wetland of the Hanbando geology: 16.7%).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.283.2-283.2
• /
• 2013

The variation of chemical and interfacial state during the growth of Ta2O5 films on the Si substrate by atomic layer deposition (ALD) was investigated using in-situ synchrotron radiation photoemission spectroscopy. A newly synthesized liquid precursor Ta(NtBu)(dmamp)2Me was used as the metal precursor, with Ar as a purging gas and H2O as the oxidant source. The core-level spectra of Si 2p, Ta 4f, and O 1s revealed that Ta suboxide and Si dioxide were formed at the initial stages of Ta2O5 growth. However, the Ta suboxide states almost disappeared as the ALD cycles progressed. Consequently, the Ta5+ state, which corresponds with the stoichiometric Ta2O5, only appeared after 4.0 cycles. Additionally, tantalum silicate was not detected at the interfacial states between Ta2O5 and Si. The measured valence band offset value between Ta2O5 and the Si substrate was 3.08 eV after 2.5 cycles.

• The Korean Journal of Food And Nutrition
• /
• v.35 no.5
• /
• pp.283-294
• /
• 2022

The purpose of this study was to develop a functional beverage by using Caragana sinica extract and Tremella fuciformis Berk, which have high physiological effects such as anti-diabetic, antioxidant, anticancer, anti-lipidemic and anti-inflammatory. To this end, we used various mixing ratios of Caragana sinica extract, Tremella fuciformis Berk, and isomalto oligosaccharide, and measured the physicochemical properties of those beverages. The analyses showed the following: moisture content of those beverages using Caragana sinica extract and Tremella fuciformis Berk was 50.51~67.64%, pH was 5.19~5.38, and crude fat content was 0.28~0.52%, crude protein content was 1.26~1.80%, ash content was 0.47~0.80 and sugar content was 8.55~26.98°Brix. The lightness (L) of the beverages was 37.70~58.11, the redness (a) was 6.88~16.94, the yellowness (b) was 13.72~23.68, the total polyphenol content was 2.07~3.46 mg/g, and the total flavonoid content was 0.37~0.42 mg/g. Based on the results, it was confirmed that the nutritional components and total polyphenols of functional beverage using Caragana Sinica Extract, Tremella Fuciformis Berk and isomalto oligosaccharide were high at a mixing ratio of 1:1.3:25%. These results will increase the use of Caragana Sinica Extract and Tremella Fuciformis Berk, as functional materials in the future, and provide a framework for the manufacturing of diluted beverages comprising mineral water and carbonated water.

• KSBB Journal
• /
• v.10 no.3
• /
• pp.283-291
• /
• 1995

The characteristics of aminopeptidase M(ApM) immobilized covalently on Cellufine Formyl and the continuous production of authentic human growth hormone(hGH) from methionyl human growth hormono(met-hGH) using the column reactor packed with immobilized ApM were investigated. Immobilized ApM with the proportion of 2.3mg ApM per 1g Cellufine Formyl gel had the highest met-hGH conversion activity. The optimum pH(7.0) and temperature($55^{\circ}C$) showed no appreciable difference between free and immobilized enzymes and the optimum temperature in continuous operation of the column reactor was also found to be $55^{\circ}C$. Under the conditions at which met-hGH was converted completely to hGH, the yield and productivity were about 77% and 0.8mg hGH/ml$.$h, respectively. In two column reactors of different sizes, met-hGH was converted to hGH with the same conversion rates and hGH yields at the same space velocities. The half-life of the reactor systems at $45^{\circ}C$ and $55^{\circ}C$ were projected from the continuous operations for 90 days to be 225 days and 81 days, respectively.

• Advances in Energy Research
• /
• v.1 no.1
• /
• pp.1-12
• /
• 2013

In this work, we present the catalytic dehydrogenation of hydrazine borane $N_2H_4BH_3$ (HB) using supported nickel catalysts at $50^{\circ}C$. In the presence of monometallic nickel catalysts, the dehydrogenation of HB is a one-step reaction consisting of the hydrolysis of the $BH_3$ group only. The challenge is to activate nickel to make it reactive towards the $N_2H_4$ moiety of HB. A set of 52 catalysts were prepared by using 2 supports ($Al_2O_3$ and $TiO_2$), 5 nickel precursors and 3 preparation methods. For the first time, we show that the supported nickel catalysts are able to dehydrogenate the $NH_3$ moiety of HB. In our experimental conditions, the best results were obtained with 20 wt% Ni-$Al_2O_3$ and 20 wt% Ni-$TiO_2$, with ca. 190 mL $H_2+N_2$ generated over a total theoretical volume of 283 mL, suggesting $H_2$ selectivity of 37 and 32%, respectively. Both catalysts were then characterized by EDX, XPS, and XRD. Our achievement is the first step forward and opens new perspectives for developing catalysts for the total dehydrogenation of HB.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.2
• /
• pp.276-283
• /
• 1997

A dry impregnation method was used for preparing pellet type Pt/$SnO_2$ gas sensor. The crystal structure, direction of the crystal, crystal size and microstructure between the catalyst and the support ($SnO_2$) were characterized with electron diffraction analysis, transmission electron microscopy, scanning electron microscopy. The characterization indicates that when Pt/$SnO_2$ sample is calcined at $400^{\circ}C$, the Cl content associated with the Pt phase diminishes and the part of Pt is moved into $SnO_2$ support. This results in the enhancement of gas sensitivity. After the reactor with a Pt/$SnO_2$ sample was run with a flow rate of 30 sccm (a mixture of 0.5% $H_2$ in $_N2$) for a while, the resistance of $SnO_2$ was saturated, but the $SnO_2$ kept absorbing $H_2$ gas. This indicates that the surface state was saturated. For the 14 ppm $H_2$ gas, the sensitivity of Pt/$SnO_2$ devices was about 81% at an operating temperature of $300^{\circ}C$.

• Journal of Applied Biological Chemistry
• /
• v.63 no.3
• /
• pp.283-290
• /
• 2020

Oxidative stress is one of the contributors of neurodegenerative disorders including Alzheimer's disease. According to previous studies, Aster yomena (Kitam.) Honda (AY) possesses variable pharmacological activities including anti-coagulant and anti-obesity effect. In this study, we aimed to determine the neuroprotective effect of ethyl acetate fraction from Aster yomena (Kitam.) Honda (EFAY) against oxidative stress. Therefore, we carried out 3-(4,5-dimethylthiazol-2-yl)-2,3-diphenyl tetrazolium bromide, lactate dehydrogenase (LDH), and 2',7'-dichlorofluorescin diacetate assays in SH-SY5Y neuronal cells treated with hydrogen peroxide (H₂O₂). H₂O₂-treated control cells exhibited reduced viability of cells, and increased LDH release and reactive oxygen species (ROS) production compared to normal cells. However, treatment with EFAY restored the cell viability and inhibited LDH release and ROS production. To investigate the underlying mechanisms by which EFAY attenuated neuronal oxidative damage, we measured protein expressions using Western blot analysis. Consequently, it was observed that EFAY down-regulated cyclooxygenase-2 and interleukin-1β protein expressions in H₂O₂-treated SH-SY5Y cells that mediated inflammatory reaction. In addition, apoptosis-related proteins including B-cell lymphoma-2-associated X protein/B-cell lymphoma-2 ratio, cleaved caspase-9, and cleaved-poly (ADP-ribose) polymerase protein expressions were suppressed when H₂O₂-treated cells were exposed to EFAY. Our results indicate that EFAY ameliorated H₂O₂-induced neuronal damage by regulating inflammation and apoptosis. Altogether, AY could be potential therapeutic agent for neurodegenerative diseases.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.4
• /
• pp.274-283
• /
• 2005

Product data quality (PDQ) is a real and significant issue in today's manufacturing environment. In the Korean automotive industry, much of the design work takes place with the support of software tools, such as CAD systems. Although many designers frequently encounter quality problems regarding product data, there is no investigation into the present state of CAD usage and PDQ activities before. The Korean automotive industry is responsible for about 11.1 percent of the total value of manufactured goods in Korea and 7.9 percent of employment in manufacturing. A study performed by the Research Triangle Institute showed that imperfect interoperability imposes at least $\$1$ billion per year on the members of the U.S. automotive supply chain. The trends toward concurrent engineering and out-sourcing have elevated the importance of high-quality product data and efficient product data exchange. This paper shows the results from a survey of PDQ conducted on seven 1st tiers among members of the Korean automotive supply chain.

• Journal of the Korean Ceramic Society
• /
• v.45 no.9
• /
• pp.518-523
• /
• 2008

The mechanical properties of silicon carbide deposited by chemical vapor deposition process onto a graphite substrate are studied using nanoindentation techniques. The silicon carbide coating was fabricated in a chemical vapor deposition process with different microstructures and thicknesses. A nanoindentation technique is preferred because it provides a reliable means to measure the mechanical properties with continuous load-displacement recording. Thus, a detailed nanoindentation study of silicon carbide coatings on graphite structures was conducted using a specialized specimen preparation technique. The mechanical properties of the modulus, hardness and toughness were characterized. Silicon carbide deposited at $1300^{\circ}C$ has the following values: E=316 GPa, H=29 GPa, and $K_c$=9.8 MPa $m^{1/2}$; additionally, silicon carbide deposited at $1350^{\circ}C$ shows E=283 GPa, H=23 GPa, and $K_c$=6.1 MPa $m^{1/2}$. The mechanical properties of two grades of SiC coating with different microstructures and thicknesses are discussed.

• Journal of the Korean Ceramic Society
• /
• v.29 no.4
• /
• pp.283-292
• /
• 1992

Duplex composites such as Y-TZP/Y-TZP-20 wt.% Al2O3 and Y-TZP/Y-TZP- 40 wt.% Al2O3 were made by mixing the sieve-shaked granules followed by isostatic pressing and sintering at 150$0^{\circ}C$ for 1 hour. So Y-TZP became matrix region and Y-TZP-20 wt.% Al2O3 or Y-TZP-40 wt.% Al2O3 became dispersed regions. In these composites, propagating cracks due to thermal shock always run into the dispersed region because these regions act as compressive zone due to low thermal expansion than matrix region. So duplexes having dispersed regions of Y-TZP-40 wt.% Al2O3 showed higher retained strength after thermal shock than matrix only composites because crack propagations were stopped more or less in the dispersed region. But when crack propagations were much more easy than matrix like Y-TZP-20 wt.% Al2O3 region, retained strength was decreased than the matrix only composites despite of the low initial strength.