• Structural Engineering and Mechanics
• /
• v.88 no.6
• /
• pp.521-533
• /
• 2023

In the present study, the finite volume method is applied for the thermal performance prediction of the natural ventilation system using vertical solar chimney whereas, design parameters are optimized through the response surface methodology (RSM). The computational simulations are performed for various parameters of the solar chimney such as absorber temperature (40≤T_abs≤70℃), inlet temperature (20≤T₀≤30℃), inlet height of (0.1≤h≤0.2 m) and chimney width (0.1≤d≤0.2 m). Analysis of variance (ANOVA) was carried out to identify the design parameters that influence the average Nusselt number (Nu) and mass flow rate (ṁ). Then, quadratic polynomial regression models were developed to predict of all the response parameters. Consequently, numerical and graphical optimizations were performed to achieve multi-objective optimization for the desired criteria. According to the desirability function approach, it can be seen that the optimum objective functions are Nu=25.67 and ṁ=24.68 kg/h·m, corresponding to design parameters h=0.18 m, d=0.2 m, T_abs=46.81℃ and T₀=20℃. The optimal ventilation flow rate is enhanced by about 96.65% compared to the minimum ventilation rate, while solar energy consumption is reduced by 49.54% compared to the maximum ventilation rate.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.98-105
• /
• 2014

Lysozyme amounts to 0.3% in egg white and functions as an agent of cell lysis and activator of tissue reconstruction. Ion exchange chromatography is the most useful method of separation among affinity chromatography, ion exchange chromatography, and ultra-filtration. The aim of present study is to find the optimum pH and temperature for the separation of lysozyme in egg white within cation exchange gel filled glass column. And we compared results of experiments with those of simulations. Phosphate buffer was used, and pH and temperature were varied as 5~7 and $25{\sim}40^{\circ}C$ respectively. RP-HPLC was the tool for the retention time identification and quantitative analysis of lysozyme. OriginPro 8 measured the peak area of lysozyme chromatogram and quantified the eluted lysozyme. Largest amount of lysozyme was separated under the conditions of pH 5 and T $25^{\circ}C$.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.80-85
• /
• 1996

The various function of the cardiovascular system(CVS) and the dynamic characteristics on each part of human body can be acquired in the electric analog circuit model. According to the performed outcome by other researchers, viscos resistance, flow inertia, and vascular compliance in the CVS are analogous to resister, inductor, and capacitor in electric circuit, so the CVS models were represented by the electric circuit models. these approaches were to propose the suitable models interest part of body and to simulate the various characteristics on the CVS. In this paper, the electric circuit model considering the characteristics of morphologic structure is represented, the parameter values of model is sotted up, and the dynamic characteristics of the the CVS is simulated using VisSim, one of the simulation tools. The observed simulation results are similar to the cardiovascular functions of nomal adults who have no heart failure. Besides, the simulation is operated to observe the pathophysiological abnomal symptoms(for example, bleeding within a certain period). The controller by baroreceptor, which is one of controllers to control the CVS, is appended in the model. and the dynamic response characteristics and the procedure to return normal state is observed in simulation when the bleeding last within a certain period.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.2
• /
• pp.178-189
• /
• 1995

In this pater, authors derive the state - space equiation about the patallel - type inverted pendulum which is adopted as control object, and constitute the control system by $H_\infty$control theory. The modeling error is unavoidably existed by linearization error, and so on. We regard this modeling error which is determined from the identification through frequency response as unstructured model uncertainty. An augmented state - space equiation with frequency weighting function is constructed for application of the $H_\infty$theory, and the mixed sensitivity problem is considered. The weighting functions are determined in consideration of the model uncertainty and the response of system in frequency region. The $H_\infty$controller is designed by using software package for controller design. From results of response simulation, the control system designed with $H_\infty$theory guarantees low sensitivity for disturbance as well as robustness against the model uncertainties.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.501-512
• /
• 2012

Social welfare maximization in a double-sided auction market is performed by implementing an aggregation-based particle swarm optimization (CAPSO) algorithm for optimal placement and sizing of one Static Synchronous Series Compensator (SSSC) device. Dallied simulation results (without/with line flow constraints and without/with SSSC) are generated to demonstrate the impact of SSSC on the congestion levels of the modified IEEE 14-bus test system. The proposed CAPSO algorithm employs conventional quadratic smooth and augmented quadratic nonsmooth generator cost curves with sine components to improve the accurate of the model by incorporating the valve loading effects. CAPSO also employs quadratic smooth consumer benefit functions. The proposed approach relies on particle swarm optimization to capture the near-optimal GenCos and DisCos, as well as the location and rating of SSSC while the Newton based load flow solution minimizes the mismatch equations. Simulation results of the proposed CAPSO algorithm are compared to solutions obtained by sequential quadratic programming (SQP) and a recently implemented Fuzzy based genetic algorithm (Fuzzy-GA). The main contributions are inclusion of customer benefit in the congestion management objective function, consideration of nonsmooth generator characteristics and the utilization of a coordinated aggregation-based PSO for locating/sizing of SSSC.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.29.3-30
• /
• 2015

We introduce an advanced one-to-one galaxy correspondence method that populates dark matter halos with galaxies by tracing merging histories of most bound member particles (MBPs) identified in simulated virialized halos. To estimate the survival time of a satellite galaxy, we adopt several models of tidal-destruction time derived from an analytic calculation, isolated galaxy simulations, and cosmological simulations. We build mock galaxy samples for each model by using a merging tree information of MBPs from our new Horizon Run 4 N-body simulation from z = 12 to 0. For models of galaxy survival time derived from cosmological and isolated galaxy simulations, about 40% of satellites galaxies merged into a certain halo are survived until z = 0. We compare mock galaxy samples from our MBP-galaxy correspondence scheme and the subhalo-galaxy scheme with SDSS volume-limited galaxy samples around z = 0 with $M_r-5{\log}h$ < -21 and -20. Compared to the subhalo-galaxy correspondence method, our method predicts more satellite galaxies close to their host halo center and larger pairwise peculiar velocity of galaxies. As a result, our method reproduces the observed galaxy group mass function, the number of member galaxies, and the two-point correlation functions while the subhalo-galaxy correspondence method underestimates them.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1636-1639
• /
• 2005

The process equipment and remote handling for the deep geological disposal of high-level radioactive waste(HLW) should be checked prior to the operation in view of reliability and operability. In this study, the concept of virtual environment workcell is implemented to analyze and define the feasible disposal process instead of real mock-up, which is very expensive and time consuming. To do this, the parts of process equipment for the disposal and maintenance will be modeled in 3-D graphics, assembled, and kinematics will be assigned. Also, the virtual workcell for the encapsulation and disposal process of spent fuel will be implemented in the graphical environment, which is the same as the real environment. This virtual workcell will have the several functions for verification such as analyses for the equipment's work space, the collision detection, the path planning and graphic simulation of the processes etc. This graphic virtual workcell of the HLW disposal process can be effectively used in designing of the processes for the hot cell equipment and enhance the reliability of the spent fuel management.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.57-61
• /
• 2005

This paper presents a new colonoscopy training simulator that includes a specialized haptic device and graphics algorithms to transfer haptic sensation through a long and flexible tube, and manage large number of polygons. The developed haptic device makes the colonoscope tube move along the two guiding rods in the translational direction. The torque of the roll motion is transferred by a timing belt and pulleys. A special guide is developed, which allows the force and torque from the motors to be transmitted to the user without loss. The haptic device is evaluated by physicians. One of the important skills of the colonoscopy, jiggling is incorporated for the first time by the developed sensor mechanism using photo-sensors. A colonoscope handle that shares the look, feel, and functions with the actual colonoscope, is developed with the necessary electronics inside. The number of polygons is reduced by an edge-collapse algorithm for real-time simulation. The algorithms to import CT data, to segment the colon image, to extract centerline of the colon, and to construct the colon surface, are integrated into a Colon Modeling Kit system that performs all these processes in real-time.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1826-1833
• /
• 2020

Administration of stable iodine has been considered a best measure to protect the thyroid from internal irradiation by radioiodine intake, and its efficacy on thyroid protection has been quantitatively evaluated in several simulation studies on the basis of simple iodine biokinetic models (i.e., three-compartment model). However, the new iodine biokinetic model adopted by the International Commission on Radiological Protection interprets and expresses the thyroid blocking phenomenon differently. Therefore, in this study, the new model was analyzed in terms of thyroid blocking and implemented to reassess the protective effects and to produce dosimetric data. The biokinetic model calculation was performed using computation modules developed by authors, and the results were compared with those of experimental data and prior simulation studies. The new model predicted protective effects that were generally consistent with those of experimental data, except for those in the range of stable iodine administration -72 h before radioiodine exposure. Additionally, the dosimetric data calculated in this study demonstrates a critical limitation of the three-compartment model in predicting bioassay functions, and indicated that dose assessment 1 d after exposure would result in a similar dose estimate irrespective of the administration time of stable iodine.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.9
• /
• pp.384-391
• /
• 2006

The harmonic currents generated along with the operating speed of electrical railroad traction are very difficult to analyze because of its nonlinear characteristics. This paper therefore presents probabilistic approach for the evaluation of harmonic currents about the operating speed of the arbitrary single traction. To use probabilistic method for railroad system, PDF(Probability Density Function) using measuring data based on the realistic h 따 monic currents per operating speed is calculated. Measuring data of harmonic current per operating speed is obtained using the result data of PSCAD/EMTDC dynamic simulation based on an IAT(Intra Airport Transit) in Incheon International Airport. The means(expected values) and variances of harmonic currents of single traction also are obtained by the PDF of the operating traction speed and harmonic currents. The uncertainty of harmonic currents can be calculated through the mean and variance of PDF. The probability of harmonic currents generated with the operating of arbitrary many tractions is calculated by the convolution of functions. The harmonics of different number of tractions are systematically investigated to assess the TDD(Total Demand Distortion) for the railroad system. The calculation of TDD was carried out using Monte-Carlo Simulations(MSCs) and the results of TDD evaluation of the power quality in the IAT power feeding system.