• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.475-480
• /
• 2010

The thermal barrier coating of a gas turbine blade was degraded by isothermal heating in a furnace and by varying the exposure time and temperature. Then, a micro-Vickers hardness test was conducted on the cross section of the bond coat and Ni-based superalloy substrate. Further, the thickness of TGO(Thermally Grown Oxide) was measured by using an image analyzer, and the changes in the microstructure and element contents in the coating were analyzed by using an optical microscope and by performing SEM-EDX analysis. No significant change was observed in the Vickers hardness of the bond coat when the coated specimen was degraded at a high temperature; delamination was observed between the top coat and the bond coat when the coating was degraded for 50 h at a temperature $1,151^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.1026-1034
• /
• 2000

As described here, most recently developed methods for improving reproduction performance of domesticated animals such as cattle, swine and chicken have been considered to be also usable for restoring some sorts of endangered and/or extinct wild animals in the very near future. Especially, the techniques for in vitro storage of gametes obtained from dead animals shortly after the death, probably 24 h following the sacrifice are also available for obtaining some of experimental specimens. In case of the endangered animals, nobody will be allowed to use any tissues from the living animals, therefore, e.g., the use of skin tissues from these bodies is another possibility of restoring the living animals. Regarding the use of skin tissues, the most highly usable tools must be the cloning techniques for reviving rare cells from the living body. Most possible techniques for cloning cells is nuclear transfer from rare species to highly relative species, and this is the case of germ cells, e.g., primordial germ cells (PGCs) of avian species. One of the possibilities is the nuclear transfer of Crested Ibis (Nipponia nippon) to the PGCs of chicken, resulting in the PGCs with transferred nucleus from the ibis. In mammalian species, the same procedure as in the case of birds would be successful, e.g., the removed nucleus from Giant Pandas will be transferred to the cell, such as somatic cells or germ cells from black bears or lesser pandas, leading to the production of transnucleared cells in the body of female black bears. These two cases are most promising techniques for reviving endangered animals in the world, particularly in Asian countries, mainly in China. As a conclusion, possible production of cloned animals carrying transnucleared cells from endangered animals, such as Giant Pandas and Crested Ibis, may be reproduced gradually in the near future. Scientists are, therefore, required to convert the paradigm from domestic animals to wild animals, including endangered and/or extinct animals on the earth.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.4
• /
• pp.2211-2215
• /
• 2016

The purpose of this study was to evaluate the prevalence and predictors of post-Loop Electrosurgical Excision Procedure (LEEP) complications in Srinagarind Hospital, Khon Kaen, Thailand. Retrospective chart review was performed for 200 patients undergoing LEEP during January 2012 to February 2013. Their mean age was 45 years-old. Fifty-three (26.5%) were menopausal. The three most common preceding abnormal cervical cytology were high-grade squamous intraepithelial lesion (HSIL; 50%), atypical squamous cell cannot exclude HSIL (ASC-H; 10.5%), and low-grade squamous intraepithelial lesion (LSIL; 10%). The overall complications prevalence rate was 16.5% (95%CI, 11.4-21.6). Complications included bleeding (11%; 95%CI, 6.66-15.3), offensive discharge (4%; 95%CI, 1.28-6.72), and pelvic inflammatory disease (1.5%; 95%CI, 0.18-3.18). Only mode of delivery was an independent predictor of post-LEEP complications. Women with previous caesarean sections carried an increased risk of complications by 3.9 times (95%CI, 1.21-12.56) compared with vaginal delivery. In conclusion, LEEP is generally safe with an acceptable complication rate. Previous caesarean section was the only independent predictor for post-LEEP complications. However, this predictor still needs prudent evaluation as no clear cause-effect relationship was identified.

• Nutrition Research and Practice
• /
• v.8 no.4
• /
• pp.410-416
• /
• 2014

BACKGROUND/OBJECTIVES: The standard pattern of Brazilian food consumption is based on the combination of rice and beans served together in the main meals. This study assessed the effects of Brazilian-staple calorie-restricted (BS-diet) dietary advice, with brown rice and beans, on metabolic parameters, body composition, and food intake in overweight/obese subjects. SUBJECTS/METHODS: Twentyseven subjects were randomly assigned to a conventional-type calorie-restricted diet (CT-diet) (n = 13) or a BS-diet (n = 14). Glucose metabolism, lipid profile, anthropometric and body composition parameters, and food intake were measured before and after 16 weeks. Paired t-tests/Wilcoxon tests were used for comparison of differences from baseline and unpaired t-tests/Mann-Whitney tests were used for comparison of differences between the groups. RESULTS: After16 weeks, both groups showed reductions in weight and waist circumference (P < 0.02), and the BS-diet group showed a decrease in body fat (P = 0.0001), and significant improvement in glucose metabolism (fasting plasma glucose, glucose and insulin areas under the curve, Cederholm index, and HOMA2-$%{\beta}$) ($P{\leq}0.04$) and lipid profile (cholesterol, triacylglycerol, LDL-c, VLDL-c, and cholesterol/HDL-c ratio) ($P{\leq}0.05$). In addition, the BS-diet group showed significant improvement in HOMA2-$%{\beta}$, compared to the CT-diet group (P = 0.03). The BS-diet group also showed a significant reduction in energy, lipids, carbohydrate, and cholesterol intake ($P{\leq}0.04$) and an increase in fiber intake ($P{\leq}0.001$), while the CT-diet group showed a significant reduction in intake of energy, macronutrients, PUFA, and cholesterol ($P{\leq}0.002$). CONCLUSIONS: These results demonstrate the benefits of the BS-diet on metabolic parameters in obese subjects.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.937-942
• /
• 2009

The aim of this study was to analyze the effects on growth and muscle development during the growing period of the sex-linked dwarf gene in the background of a Taiwan Country chicken strain, L2, selected for egg production. Eight crossbred males, heterozygous for the DW*DW mutation, were each backcrossed to six females of the L2 strain to produce two genotypes of BC females, either normal (DW*N+/-) or dwarf (DW*DW/-). The experiment included 251 normal and 207 dwarf pullets. The effect of the dwarf gene on body weight and shank length was highly significant from 2 weeks of age. The reduction of body weight by the dwarf gene reached 34.8% and 37.4% as compared to normal sibs at 16 and 20 weeks of age, respectively. Parameters of the growth curve were estimated: the age at inflection (TI) was higher in normal pullets (66.9 days) than in dwarf pullets (61.2 days). A significant effect of the dwarf gene on single muscle fiber cross-section area was found from 12 weeks of age onwards, whereas the dwarf gene had no effect on the total number of muscle fibers. Comparing the effect of the dwarf gene on shank length at different ages revealed an earlier effect on skeleton growth, observed from 2 weeks of age, than on muscle development, which was affected from 8 to 12 weeks of age.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.513-523
• /
• 2009

The measuring point of the Hangang Bridge affected by tide has some special topographic characteristics due to Nodle Island. Furthermore the submerged weirs located on the upstream and downstream. Therefore flow is separated and joined by Nodle Island. Discharge measurement at the point of the Hangang Bridge is very important, because Hangang Bridge is key station in managing the discharge and flood forecasting. In the past, it was too difficult to measure discharge in tidal conditions. HRFCO(Han River Flood Control Office) installed automatic discharge measurement facilities for solving this problem. Measuring equipments operates and measures discharge every 10 minutes at 2 points(southern and northern section close to Nodle Island), and calculates flow discharge using Chiu's velocity law(Chiu, 1988). In order to verify the results of automatic discharge measurements, manual discharge measurements were carried out by ADCP. In addition, the monthly discharge were also compared.

• Journal of Conservation Science
• /
• v.4 no.1 s.4
• /
• pp.3-10
• /
• 1995

This study focused on the reconstructional point of Shinan ship-wreck that was excavated between $1976\~1984$. The wreck, which might be sunk in the beginning of the 14th century, is regarded as a vessel of Yuan dynasty, China. This paper tried to find out some structural characteristics and principal dimensions for restoration. The Shinan shipwreck's structural characteristics are summarized as follow, 1) The Shinan shipwreck is formed V-shaped cross section with bar keel, 2) The vessel is divided 8 holds by 7 bulkheads. 3) The ship has flat type stem and transome stern. 4) A rabbeted clinker -built is basically adopted on planking joint. 5) A wooden sheathing, which means a sort of protecting board against marine insects, is covered outside of the main hull, 6) For making an watertight structure, oakum and lime mixtured t'ung-oil are used along the seam of planking and bulkhead. 7) A V-shaped deep water-way exists at both deck side. 8) The shipwreck is believed to have 2 masts at least. 9) The shiptimbers are classified as Chinese Red Pine(Pinus Massonina) which is mainly grown in the southern part of China. Considering as mentioned above the structural characteristics, Shinan ship-wreck could be classified as Chinese Fu-chuan type(복선형) of sea-going ship. The Shinan ship's principal dimensions which are calculated on the basis of Chinese traditional shipbuilding custom, are as follow, Length overall(L.O.A). : 34.80m Length water line(L.W.L) : 24.90m Breadth(B.max.) : 11m Breadth(B) : 10m Depth at keel line(H) : 3.75m Draft(D). : 3.15m Freeboard(F) : 0.65m Ratio, length/breadth(L/B). : 2.26 Ration, breadth/depth(B/D) : 3.5 Height of stem : 7m Height of stern : 10m Displacement : ab.340ton.

• Composites Research
• /
• v.31 no.1
• /
• pp.23-29
• /
• 2018

The RFI process can be applied to very thick structures without limiting the resin viscosity. When the proper thickness of the resin film cannot be set, the resin film creates either the non-impregnated section or the excessive resin contents and this leads to the deterioration of mechanical properties. Therefore, this study proposed a method for setting the resin film thickness in the RFI process. The fiber compaction behavior test was proposed by setting the proper resin film thickness and the properties of composites were evaluated through short beam shear strength test, compression test and porosity measurement to verify the proposed method. The evaluation of physical properties of composites was conducted and an appropriate level of resin film thickness was found based on the results of fiber compaction behavior test.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.6
• /
• pp.671-678
• /
• 2004

Statement of problem. Reducing treatment time in implant dentistry is a matter of main concern. There are so many factors affecting the success rate of immediate or early loaded implant for the initial bone response. The especially microscopic properties of implant surfaces playa major role in the osseous healing of dental implant. Purpose. The aims of this study were to perform a histologic and histomorphometric comparison of the healing characteristics anodically roughened surface, HA coated surface and RBM surface implant, and to compare of ISQ values measured by $Osstell^{TM}$ for resonance frequency analysis in dogs mandible during 2 weeks. Material and method. Bone blocks from 2 dogs were caught after covered healing for 0 day(2 h); Group I, 1 week; Group II and 2 weeks; Group III. One longitudinal section was obtained for each implant and stained with hematoxylin and eosin. Histomorphometric analysis was done with Kappa Imagebase system to calculate bone-to-implant contact and bone volumes inside the threads. ISQ values were measured in every time of surgery schedule. Conclusion. The experiment revealed that: 1. The percentages of bone-to-implant contact on the fixture in each group were not significantly different(P > 0.05). 2. The percentages of bone area inside the threads on the fixture in each group were not significantly different(P > 0.05). 3. The ISQ level showed clinical stability of each fixture during 2 weeks(all ISQ level ${\geq}71$ ).

• Economic and Environmental Geology
• /
• v.39 no.2 s.177
• /
• pp.103-109
• /
• 2006

Batch adsorption experiments were performed to adsorb cadmium [Cd(II)], copper [Cu(II)], and lead [Pb(II)] onto sphagnum peat moss. According to the results, 10-50 mg/L of Cd(II), Cu(II), and Pb(II) were effectively adsorbed and removed within 1 h by 1.0 g/L of sphagnum peat moss. The amounts of Cd(II), Cu(II), and Pb(II) adsorbed on sphagnum peat moss increased with increasing the initial concentrations. The kinetics for the adsorption of Cd(II), Cu(II), and Pb(II) on sphagnum peat moss was described well using the pseudo-second order model at different initial concentrations. The maximum adsorption capacities calculated from the Langmuir isotherm for Cd(II), Cu(II), and Pb(III) were 33.90, 29.15, and 91.74 mg/g, respectively. Experimental results showed that sphagnum peat moss was a very effective adsorbent on the adsorption of Cd(II), Cu(II), and Pb(II).