• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.252-252
• /
• 2009

In this work, the nanocrystalline ZnO/polycrystalline (poly) aluminum nitride (AlN)/Si structure was fabricated for humidity sensor applications based on surface acoustic wave (SAW). In this structure, the ZnO film was used as sensing material layer. These ZnO and AlN(0002) were deposited by so-gel process and a pulse reactive magnetron sputtering, respectively. These experimental results showed that the obtained SAW velocity on AlN film was about 5128 m/s at $h/\lambda$=0.0125 (h and $\lambda$ is thickness and wavelength, respectively). For ZnO sensing layers coated on AlN, films have hexagonal wurtzite structure and nanometer particle size. The crystalline size of ZnO films annealed at 400, 500, and 600 $^{\circ}C$ is 10.2, 29.1, and 38 nm, respectively. Surface of the film exhibits spongy which can adsorb steam in the air. The best quality of the ZnO film was obtained with annealing temperature at 500 $^{\circ}Cis$. The change in frequency response (127.9~127.85 MHz) of the SAW humidity sensor based on ZnO/AlN structure was measured along the change in humidity (41~69%). The structural properties of thin films wereinvestigated by XRD and SEM.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.320-325
• /
• 2010

A multiphase CFD analysis is performed to investigate the effect of near-wall grid for simulating a subcooled boiling flow in vertical tube. The multiphase flow model used in this CFD analysis is the two-fluid model in which liquid(water) and vapor(steam) are considered as continuous and dispersed fluids, respectively. A wall boiling model is also used to simulate the subcooled boiling heat transfer at the heated wall boundary. The diameter and heated length of tube are 0.0154 m and 2 m, respectively. The system pressure in tube is 4.5 MPa and the inlet subcooling is 60 K. The near-wall grid size in the non-dimensional wall unit ($y_{w}^{+}$) was examined from 64 to 172 at the outlet boundary. The CFD calculations predicted the void distributions as well as the liquid and wall temperatures in tube. The predicted axial variations of the void fraction and the wall temperature are compared with the measured ones. The CFD prediction of the wall temperature is shown to slightly depend on the near-wall grid size but the axial void prediction has somewhat large dependency. The CFD prediction was found to show a better agreement with the measured one for the large near-wall grid, e.g., $y_{w}^{+}$ > 100.

• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.427-435
• /
• 2007

에너지원으로서 수소를 생산하기 위하여 하니컴 구조를 갖는 모노리스에 10 wt% $Ni/CeO_2-ZrO_2$ 촉매를 담지한 후 메탄의 수증기 개질 실험을 수행하였다. 다른 $CeO_2/ZrO_2$ 몰비를 갖는 촉매들 중에서, $Ni/CeO_2-ZrO_2(CeO_2/ZrO_2=4/1)$촉매가 $700-800^{\circ}C$에서 높은 메탄의 전환율을 보여 주었다. 10wt% $Ni/CeO_2-ZrO_2$ 촉매가 담지된 금속 모노리스 촉매체는 높은 열전도도와 비표면적들로 인하여 좋은 촉매 특성을 보여줌을 확인할 수 있었다. 또한, 금속모노리스 촉매체는 반응물에서 과다의 수증기에 의한 수소 수율에서 크게 영향을 받지 않음을 알 수 있었다. $GHSV=30,000h^{-1}$, 반응물 비$(H_2O/CH_4=3.0)$ 반응온도 $800^{\circ}C$에서 금속모노리스 촉매체는 98%이상의 메탄의 전환율을 보여주었다. 생성물 가스에서 $CO_2/CO$의 비는 수증기/메탄의 반응물비가 증가할수록 수성가스화 반응에 의하여 증가됨을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.97.2-97.2
• /
• 2011

Pt-Ru and Pt-Ni bimetallic catalysts were prepared and tested for heavy hydrocarbon reforming. Metals were supported on CGO($Ce_{0.8}Gd_{0.2}O_{2.0-x}$) by incipient wetness method. The prepared catalysts were characterized by Temperature programmed reduction(TPR). Oxidative steam reforming of n-dodecane was conducted to compare the activity of the catalysts. The reforming temperature was varied from $500^{\circ}C$ to $800^{\circ}C$ at fixed $O_2$/C of 0.3, $H_2O$/C of 3.0 and GHSV of 5,000/h.Reduction peaks of metal oxide, surface CGO and bulk CGO were detected. Reduction temperature of metal oxide decreased over the bi-metallic catalysts. It is considered that interaction between metals leads to decrease interaction between metal and oxygen. On the other hands, reduction temperatures of surface CGO were dectected in the order of Pt-Ru > Pt-Ni > Pt. low reduction temperatures of surface CGO indicates the low activation energy for oxygen ion conduction to metal. Oxygen ion conduction is known as de-coking mechanism of ionic conducting supports such as CGO. In activity test, fuel conversion was in the same order of Pt-Ru > Pt-Ni > Pt. Especially, 100% of fuel conversion was obtained over Pt-Ru catalysts at $500^{\circ}C$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.73.2-73.2
• /
• 2011

합성천연가스(SNG: Synthetic Natural Gas)를 얻기 위해, 석탄 가스화로부터 얻은 합성가스는 일반적으로 수소와 일산화탄소의 비가 3.0($H_2$/CO)이 되도록 수성가스전환(WGS)반응을 거친 후 메탄화반응기로 유입되며, 가능하면 낮은 온도에서 메탄 전환율이 높은 메탄화 반응의 특성상 강한 발열반응이 수반되므로 이를 낮추는 것이 중요하다. 또한, 최종생성물내의 메탄 농도를 높이기 위해 WGS 이후 탈황과 동시에 이산화탄소를 제거하기 위한 공정이 요구된다. 본 연구에서는 정제된 합성가스의 WGS와 이산화탄소 제거가 생략된 공정을 개발하기 위해, 상업용 촉매에 대하여 수소의 농도가 낮은 합성가스를 이용하여 스팀과 이산화탄소에 대한 메탄화반응 특성을 평가하였다. 또한, 이산화탄소의 존재여부에 따라 스팀으로 메탄화반응과 WGS가 동시에 일어날 수 있는 최적의 운전조건을 얻고자 하였다.

• 한국식품영양학회지
• /
• 제12권3호
• /
• pp.258-264
• /
• 1999

This study was carried out to investigate the status in weight loss yield of edible meat quality and free amino acid contents of the snow crab(Chionoectes japonicus) by steaming and various drying treat-ment. Change of body weight loss in steaming treatment sample were 20.48∼26.72% and yield of edible meat of steaming sample was higher than raw sample(p<0.05) The pH value was increased with steam-ing and drying and pH of trunk meat was more increased than leg meat. Volatile basic nitrogen(VBN) content of vacuum dried sample was highest and VBN of hot-air and freezing dried sample were about 10mg%. Content of vaccum dried sample wre 41.33 and 48,56mg%. Thirty kind of free amino acids dectected in the snow crab and changes of free amino acid in leg meat were markedly reduced by vacuum drying and the reducing ratio of leg meat by freeze drying was little. The major free amino acid of leg and trunk meat were 39.94% 46.78% respectively. The formation of flavor free amino acid in freezing dried sample were high but its hot-air aried sample were small.

• 공업화학
• /
• 제16권4호
• /
• pp.519-526
• /
• 2005

소다석회 조성의 폐 유리를 발포유리의 원료로 활용하기 위해 폐유리의 가수분해를 시도하였다. 소다석회유리 조성으로 만들어진 판유리 및 병 유리 등은 공히 가압 하에서 증기상의 물 또는 액체상의 물에 의해 효율적으로 가수분해가 진행되었다. 최적의 가수분해의 조건은 공히 $250^{\circ}C$, 2 h이었으며 이 조건하에 얻어진 수화유리의 함수율은 발포유리의 원료유리로서 발포화가 가능한 7.85~10.04%였다. 수식제인 Na성분은 액상의 물에 의한 가수 분해에 효율적이며 유시시료에 대한 중량비로서 0.04첨가 시 가장 높은 함수율을 지닌 수화유리가 얻어졌다.

• 한국식생활문화학회지
• /
• 제30권6호
• /
• pp.766-772
• /
• 2015

This research was conducted to investigate the effect of essential oil (EO) from Artemisia Princeps Pampanini on quality of tomato during storage. EO was extracted by steam distillation and diluted by 1 and 2%. Total phenolic contents and antioxidative activities of EO were analyzed. Tomato was packaged corrugated box covered with polypropylene (PP) film containing EO (1 and 2%) and then stored at room temperature for 10 days. During storage, appearance, weight loss rate, soluble solid contents, pH and a (redness) value were measured for tomato. Total phenolic contents of EO increased in a dose-dependence. The DPPH and ABTS radical scavenging activities also showed a concentration-dependent increase. The weight loss rate was lowest using the film packaged in 1% EO. During the storage period, soluble solid contents and pH increased in all treatments. The a value increased regardless of EO concentration in films. Especially, tomato packaged with EO film showed a lower a value than non EO-packaged ones. This result suggests that application of EO to film is effective for tomato quality preservation.

• Applied Biological Chemistry
• /
• 제38권6호
• /
• pp.546-548
• /
• 1995

건조 털목이버섯의 휘발성 향기성분을 분석하기 위해 SDE 방법으로 정유성분을 분리한 다음 GC-MS를 이용하여 성분을 확인하였다. 확인된 30개의 휘발성 향기성분중 acid 11종류, alcohol 10종류, aldehyde 5종류, ketone 3종류, 기타 1종류였다. 건조된 털목이 버섯의 주요 향기성분은 hexadecanoic acid(16.74%), benzeneethanol(7.77%), pentadadecanoic acid(7.59%), dihydro-5-pentyl-2(3H)-furanone(4.28%), tetradecanoic acid(3.37%), pentanoic acid(3.68%), 1-octen-3-ol(1.26%)등이 확인되었다.

• 한국미생물·생명공학회지
• /
• 제3권3호
• /
• pp.135-140
• /
• 1975

방송이를 4% H$_2$SO$_4$,용액으로 1.5kg/$ extrm{cm}^2$에서 30분간 전가수분해 시키면 원료에 대한 당화율은 21%을 얻었으며 생성된 당화액에 효모 Candida를 배양한 결과 당이용율은 20.5%에 불과하며 생성당에 대한 균체량의 비율은 21.25%을 얻을 수 있었다.