• Title/Summary/Keyword: H-MAC

검색결과 145건 처리시간 0.024초

센서 네트워크에서 전력소모와 지연시간 개선을 위한 MAC 계층 프로토콜 연구 (MAC Layer Protocol for Improvement in Power Consumption and Time Delay in a Sensor Network)

  • 신재관;박동찬;김석찬
    • 한국통신학회논문지
    • /
    • 제40권2호
    • /
    • pp.366-368
    • /
    • 2015
  • 이 논문은 재난감지 시스템과 같이 비주기적 패킷이 발생하는 센서 네트워크를 위한 MAC 프로토콜을 제안한다. 기존 무선 센서 네트워크에 사용되던 B-MAC은 짧은 지연시간을 가지지만 과도한 프리엠블과 오버히어링으로 인한 전력손실이 발생하며, S-MAC은 동기화로 인한 전력소모가 많은 단점을 가진다. 따라서 이 논문에서는 S-MAC의 전력 소모를 개선하고 B-MAC의 오버헤드와 오버히어링을 개선한 H-MAC을 제안하고 성능을 분석한다.

폐감귤박으로 제조한 자성 활성탄을 이용한 2,4-디클로로페놀의 흡착특성 (Adsorption Characteristics of 2,4-Dichlrophenol by Magnetic Activated Carbon Prepared from Waste Citrus Peel)

  • 감상규;이민규
    • 공업화학
    • /
    • 제29권4호
    • /
    • pp.388-394
    • /
    • 2018
  • 폐감귤박으로 제조한 자성 활성탄(MAC, magnetic activated carbon)을 이용하여 수용액 중의 2,4-디클로로페놀(2,4-dichlorophenol, 2,4-DCP)을 제거하는 연구하였다. 접촉시간, MAC의 투여량, 용액의 온도, pH 및 2,4-DCP 농도를 변화시켜 MAC에 의한 2,4-DCP의 흡착특성을 조사하였다. 등온 흡착 실험결과는 Langmuir 등온 모델식에 의해 잘 설명되었으며, Langmuir 등온식으로부터 구한 최대 흡착량은 312.5 mg/g이었다. 흡착속도는 유사 2차 속도식에 의해 잘 기술되었으며, 입자 내 확산 모델 자료는 흡착 과정 동안 막 확산과 입자 내 확산이 동시에 일어나는 것을 말해 주었다. 열역학적 파라미터인 ${\Delta}H^o$${\Delta}G^o$는 각각 양의 값과 음의 값을 가지므로 MAC에 의한 2,4-DCP의 흡착은 자발적이며 흡열반응으로 일어나는 것을 알 수 있었다. 흡착실험을 완료한 후 사용한 MAC는 외부에서 자석을 이용하여 쉽게 분리할 수 있었다.

Improving the Rapidity and Accuracy of Carbapenem-Resistant Enterobacteriaceae Detection by Shortening the Enrichment Duration

  • Miyoung, Lee
    • 한국미생물·생명공학회지
    • /
    • 제50권4호
    • /
    • pp.584-591
    • /
    • 2022
  • Identifying carbapenem-resistant Enterobacteriaceae (CRE) is necessary to prevent nosocomial CRE infection outbreaks. Here, a rapid identification method with reduced enrichment time was developed without compromising accuracy. A total of 49 rectal swabs requested for CRE screening at the Department of Diagnostic Medicine at Hospital B in Busan, Korea, were included in this study. Specimens were inoculated on MacConkey and CHROMID Carba media either directly or following enrichment for 3, 6, and 24 h in 100 μl trypticase soy broth containing an ertapenem disk. The enriched cultures were further inoculated on CHROMID Carba or MacConkey media containing an ertapenem disk. In total, 19 CRE and 5 carbapenem-intermediate Enterobacteriaceae isolates were obtained from the 49 swabs. Among the 19 CRE isolates, carbapenemase-producing Enterobacteriaceae constituted 13 strains. Moreover, of the 19 CRE isolates, 16 (81.25%) and 17 (88.24%) were identified from the direct cultures on MacConkey and CHROMID Carba media, respectively. After 3 h of enrichment, the proportions of the CRE identified in the media were: MacConkey medium, 16/19 (81.25%); CHROMID Carba medium, 17/19 (88.24%); and MacConkey medium containing an ertapenem disk, 17/19 (88.24%). The detection rates after 6 h of enrichment were the same for all three media (19/19 strains, 100%), whereas those after 24 h of enrichment were 21, 22, and 24 strains, respectively, but included false positives. These findings suggest that a 6-h enrichment before inoculation on the CHROMID Carba medium is optimal for the rapid and accurate detection of CRE in clinical samples.

MAC Etch를 이용한 Si 나노 구조 제조 (Silicon Nanostructures Fabricated by Metal-Assisted Chemical Etching of Silicon)

  • 오일환
    • 전기화학회지
    • /
    • 제16권1호
    • /
    • pp.1-8
    • /
    • 2013
  • 본 총설에서는 Si 비등방성 식각(anisotropic etching) 공정인 metal-assisted chemical etching(MAC etch 혹은 MACE) 분야 기본 원리, 중요 변수, 그리고 최근 연구 성과들을 정리하였다. 1990년에 최초로 Si 표면에 금속 촉매를 증착한 후 $H_2O_2$/HF 기반 식각을 진행하면 용액 중에서도 비등방성 식각을 통해 다양한 고종횡비(high aspect ratio) 나노구조를 형성할 수 있다는 것이 밝혀 졌다. 고가의 진공기반 장비가 필요한 건식 식각에 비해, 습식 식각을 통해서도 상대적으로 간편하고 경제적으로 종횡비가 큰 Si 마이크로/나노 구조를 만들 수 있게 되었다. 초기 연구들을 통해 MAC etch중 산화제가 촉매에 의해 환원되고, 촉매/Si 계면 근처의 Si 원자들이 선택적으로 식각/용해되어 수직 방향으로 촉매가 Si 기판을 파고 들어가며 비등방성 식각이 발생함이 밝혀졌다. MAC etch에 영향을 미치는 중요 변수로는 금속 촉매의 종류 및 모양, 식각액의 조성, Si기판의 도핑 농도이다. 또한 본 총설은 MAC etch에 의해 형성된 Si 나노 구조를 이용한 태양전지, 수소 연료, 리튬 이온 전지 등의 응용 분야를 다루었다.

Electrospun Nanocomposite Fiber Mats of Zinc-Oxide Loaded Polyacrylonitrile

  • Nataraj, S.K.;Kim, B.H.;Yun, J.H.;Lee, D.H.;Aminabhavi, T.M.;Yang, K.S.
    • Carbon letters
    • /
    • 제9권2호
    • /
    • pp.108-114
    • /
    • 2008
  • We have demonstrated the feasibility of using electrospinning method to fabricate long and continuous composite nanofiber sheets of polyacrylonitrile (PAN) incorporated with zinc oxide (ZnO). Such PAN/ZnO composite nanofiber sheets represent an important step toward utilizing carbon nanofibers (CNFs) as materials to achieve remarkably enhanced physico-chemical properties. In an attempt to derive these advantages, we have used a variety of techniques such as field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and high resolution X-ray diffraction (HR-XRD) to obtain quantitative data on the materials. The CNFs produced are in the diameter range of 100 to 350 nm after carbonization at $1000^{\circ}C$. Electrical conductivity of the random CNFs was increased by increasing the concentration of ZnO. A dramatic improvement in porosity and specific surface area of the CNFs was a clear evidence of the novelty of the method used. This study indicated that the optimal ZnO concentration of 3 wt% is enough to produce CNFs having enhanced electrical and physico-chemical properties.

Chemoenzymatic Synthesis of Dual-responsive Amphiphilic Block Copolymers and Drug Release Studies

  • Chen, Peng;Li, Ya-Peng;Wang, Shu-Wei;Meng, Xin-Lei;Zhu, Ming;Wang, Jing-Yuan
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권6호
    • /
    • pp.1800-1808
    • /
    • 2013
  • Dual-responsive amphiphilic block copolymers were synthesized by combining enzymatic ring-opening polymerization (eROP) of ${\varepsilon}$-caprolactone (CL) and ATRP of N,N-dimethylamino-2-ethyl methacrylate (DMAEMA). The obtained block copolymers were characterized by gel permeation chromatography (GPC), $^1H$ NMR and FTIR-IR. The critical micelle concentration (CMC) of copolymer was determined by fluorescence spectra, it can be found that with hydrophilic block (PDMAEMA) increasing, CMC value of the polymer sample increased accordingly, and the CMC value was 0.012 mg/mL, 0.025 mg/mL and 0.037 mg/mL for $PCL_{50}$-b-$PDMAEMA_{68}$, $PCL_{50}$-b-$PDMAEMA_{89}$, $PCL_{50}$-b-$PDMAEMA_{112}$, $PCL_{50}$-b-$PDMAEMA_{89}$ was chosen as drug carrier to study in vitro release profile of anti-cancer drug (taxol). The temperature and pH dependence of the values of hydrodynamic diameter (Dh) of micelles, and self-assembly of the resulting block copolymers in water were evaluated by dynamic light scattering (DLS). The result showed that with the temperature increasing and pH decreasing, the Dh decreased. Drug-loaded nanoparticles were fabricated using paclitaxel as model. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) had been explored to study the morphology of the hollow micelles and the nanoparticles, revealing well-dispersed spheres with the average diameters both around 80 nm. In vitro release kinetics of paclitaxel from the nanoparticles was also investigated in different conditions (pH and temperature, etc.), revealing that the drug release was triggered by temperature changes upon the lower critical solution temperature (LCST) at pH 7.4, and at $37^{\circ}C$ by an increase of pH.

유한차분법과 특성곡선법을 이용한 파이프-오리피스계의 가스 유동 예측 (A Prediction of Gas Flow in a Pipe and Orifice System Using The Finite Difference Method and The Method of Characteristics)

  • 나홍섭;고대권;조규학;장세호;안수길
    • 동력기계공학회지
    • /
    • 제7권2호
    • /
    • pp.11-16
    • /
    • 2003
  • Because of the advancement of digital computers and software technologies, simulation methods have been used to reduce time and costs. A lot of simulation methods have been developed for the improvement of charging efficiency on the intake and exhaust system of engines. In this study, as a basic step for the development of the gas flow simulation program for the intake and exhaust system, the gas flow in a pipe-orifice system was calculated with three algorithms(Method of Characteristics, MacCormack Method for conservation, and MacCoramck Method for nonconservation). The calculated results using three numerical algorithms were compared with measured result to verify the calculation accuracy.

  • PDF

마이코박테리아에 대한 인체 말초혈액 단핵구와 폐포대식세포의 림프구 의존적 살해능에 관한 연구 (The Lymphocyte Dependent Bactericidal Assay of Human Monocyte and Alveolar Macrophage for Mycobacteria)

  • 천선희;이유현;이종수;배기선;신수연
    • Tuberculosis and Respiratory Diseases
    • /
    • 제53권1호
    • /
    • pp.5-16
    • /
    • 2002
  • 연구배경 : 말초혈액 단핵구와 폐포 대식세포가 림프구에 의하여 활성화된 후 탐식된 세포내 결핵균을 제거하는 최종 효과기로 작용하지만 결핵균은 이러한 세포 내에서조차 살아남아 증식한다. 본 연구에서는 인체 감염의 경우와 유사하도록 낮은 감염률(결핵균:포식세포 1:10)을 이용하여 MAC(Mycobacterium avium)과 Mycobaterium tuberculosis $H_{37}Ra$에 대한 단핵구와 폐포 대식세포의 림프구 의존적 결핵균 살해능의 정도를 측정하고자 하였다. 방 법 : 정상인과 폐결핵 환자의 말초혈액 단핵구를 Ficoll gradient 방법을 이용하여 분리하고, 정상인의 폐포 대식세포를 기판지폐포 세척액에서 분리 하여 96well plate에 $1{\times}10^5$ 씩 분주하고 결핵균주 MAC과 $H_{37}Ra$에 낮은 감염률(결핵균:단핵구 1:10)로 감염시켰다. 일부는 비부착세포(림프구)를 림프구:포식세포 10:1 비율로 첨가하여 $37^{\circ}C$, 5% $CO_2$ 배양기에 배양하였다. 1일, 4일, 및 7일째 각각 수확하여 middlebrook 7H10/OADC agar plate에 접종 후 집락이 형성될 때까지 $37^{\circ}C$, 5% $CO_2$ 배양기에 배양하였다. 결핵균의 수는 lysate의 $m{\ell}$(세포수 $10^6$)당 CFU로 표시하였고, 결핵균의 살해능은 log killing ratio[logKR=$log_{10}$(Final CFU/Initial CFU)]로 표시하였다. 배양 1일째 상층액에서 TNF-${\alpha}$, 배양 4일째 상층액에서 ${\gamma}$-IFN을 Elisa kit를 사용하여 측정하였다. 결 과 : 단핵구의 세포내 결핵균 살해능은 정상대조군에 비하여 결핵환자군에서 ${\Delta}logKR$가 MAC -0.4, $H_{37}Ra$ -0.2 정도로 유의하게 증가되어 있었다(p<0.05). 정상대조군에서 폐포 대식세포의 결핵균 살해능은 단핵구에 비하여 ${\Delta}$logKR가 MAC과 $H_{37}Ra$ 모두 -0.2정도로 증가된 경향을 보였다. 단핵구와 폐포 대식세포내 결핵균 살해능은 림프구 의존적으로 림프구 첨가시의 ${\Delta}logKR$는 MAC -0.4, $H_{37}Ra$ -0.5 정도로 포식세포 단독에 비하여 유의하게 증가되었다 (p<0.05). ${\gamma}$-IFN은 말초 단핵구와 폐포 대식세포 단독배양시 분비량이 경미하였으나 림프구 첨가시에는 유의한 분비의 증가를 보였다. 결 론 : 본 연구는 낮은 결핵균 감염률을 이용한 인체 포식세포의 세포내 결핵균 감염 모델이다. 결핵균 살해능은 림프구 의존적이며, 포식세포의 결핵균 탐식 후 7일까지의 배양에서 결핵환자의 단핵구와 PPD 양성 정상인의 폐포 대식세포에 림프구를 첨가한 경우에만 실질적인 균 증식의 제한을 볼 수 있었다.

H-형태 양친매성 펜타블록 공중합체의 화학효소적 합성과 자기회합거동 평가 (Chemoenzymatic Synthesis of H-shaped Amphiphilic Pentablock Copolymer and Its Self-assembly Behavior)

  • Chen, Peng;Li, Ya-Peng;Li, Cai-Jin;Meng, Xin-Lei;Zhang, Bao;Zhu, Ming;Liu, Yan-Jing;Wang, Jing-Yuan
    • 폴리머
    • /
    • 제37권3호
    • /
    • pp.332-341
    • /
    • 2013
  • H-shaped amphiphilic pentablock copolymers $(PSt)_2-b-PCL-b-PEO-b-PCL-b-(PSt)_2$ was synthesized via chemoenzymatic method by combining enzyme-catalyzed ring-opening polymerization (eROP) of ${\varepsilon}$-caprolactone (${\varepsilon}$-CL) and atom transfer radical polymerization (ATRP) of styrene. By this process, we obtained copolymers with controlled molecular weight and low polydispersity. The structure and composition of the obtained copolymers were characterized by nuclear magnetic resonance (NMR), gel permeation chromatography (GPC) and infrared spectroscopy analysis (IR). The crystallization behavior of the copolymers was analyzed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The crystallization behavior of the H-shaped block copolymers demonstrated a PCL dominate crystallization. The self-assembly behavior of the copolymers was investigated in aqueous media. The hydrodynamic diameters of the copolymer micelles in aqueous solution were measured by dynamic light scattering (DLS). The morphology of the copolymer micelles was observed by atomic force microscopy (AFM) and transmission electron microscopy (TEM). The hydrodynamic diameters of spherical micelles declined gradually with the increase of the hydrophobic chain lengths of the copolymers. The critical micelle concentration (CMC) values were determined from fluorescence emission, and it was found that the CMCs decreased with an increase of PSt hydrophobic block lengths.

축전식 탈염 시스템에서 전하량 제어를 통한 경도물질의 안정적인 탈염 (Stable Desalination of Hardness Substances through Charge Control in a Capacitive Deionization System)

  • 김윤태;최재환
    • 공업화학
    • /
    • 제30권4호
    • /
    • pp.472-478
    • /
    • 2019
  • 막 축전식 탈염(MCDI) 셀에 공급하는 총 전하(TC)를 조절하여 경도물질($Ca^{2+}$)을 안정하게 탈염할 수 있는 방법을 연구하였다. 흡착과정에서 TC를 변화시키면서 흡착(1.5 V)과 탈착(0.0 V)을 30회 반복하였다. 탈염과정에서 유출수의 농도와 pH, 흡착 및 탈착량, 전류밀도와 셀 전위의 변화를 분석하였다. MCDI 셀에 사용된 탄소전극의 최대허용전하(MAC)는 46 C/g로 측정되었다. MAC 이하의 TC (40 C/g)에서 운전한 결과 전극반응이 일어나지 않아 장기간 운전에서도 안정적인 탈염특성을 얻을 수 있었다. 반면, MAC 이상의 TC (50, 60 C/g)에서 운전한 경우 유출수의 농도와 pH가 크게 변하였다. 또한 전극반응으로 인해 전극표면에 스케일이 생성되어 셀의 전기저항이 점차 증가하였다. 이를 통해 흡착과정에서 MCDI 셀에 공급하는 전하를 제어함으로써 전극반응 없이 경도물질을 안정하게 제거할 수 있음을 확인하였다.