• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.366-368
• /
• 2015

This paper proposes a MAC protocol for sensor networks such as disaster detection system which generate the non-periodic packet. B-MAC has been used to solve delay problem for sensor networks, however, the power loss occurs due to excessive preamble and over-hearing. In contrast, S-MAC has a number of drawbacks in power consumption due to synchronization. In this paper, we propose H-MAC and analyze its performance which has improved power consumption compared to S-MAC and overhead and over-hearing compared to B-MAC.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.388-394
• /
• 2018

The removal of 2,4-dichlorophenol (2,4-dichlorophenol, 2,4-DCP) in aqueous solution was studied using the magnetic activated carbon (MAC) prepared from waste citrus peel. The adsorption characteristics of 2,4-DCP by MAC were investigated by varying the contact time, MAC dose, solution temperature, pH and 2,4-DCP concentration. The isothermal adsorption data were well explained by the Langmuir isotherm model equation and the maximum adsorption capacity calculated from the Langmuir isotherm equation was 312.5 mg/g. The adsorption kinetic data were well described by the pseudo-second-order reaction equation. The intraparticle diffusion model data indicated that both the film and intraparticle diffusion occur simultaneously during the adsorption process. The thermodynamic parameters of ${\Delta}H^o$ and ${\Delta}G^o$ have positive and negative values, respectively, indicating that the adsorption of 2,4-DCP by MAC is a spontaneous endothermic reaction. After the adsorption experiment was completed, the used MAC could be easily separated by an external magnet.

• Microbiology and Biotechnology Letters
• /
• v.50 no.4
• /
• pp.584-591
• /
• 2022

Identifying carbapenem-resistant Enterobacteriaceae (CRE) is necessary to prevent nosocomial CRE infection outbreaks. Here, a rapid identification method with reduced enrichment time was developed without compromising accuracy. A total of 49 rectal swabs requested for CRE screening at the Department of Diagnostic Medicine at Hospital B in Busan, Korea, were included in this study. Specimens were inoculated on MacConkey and CHROMID Carba media either directly or following enrichment for 3, 6, and 24 h in 100 μl trypticase soy broth containing an ertapenem disk. The enriched cultures were further inoculated on CHROMID Carba or MacConkey media containing an ertapenem disk. In total, 19 CRE and 5 carbapenem-intermediate Enterobacteriaceae isolates were obtained from the 49 swabs. Among the 19 CRE isolates, carbapenemase-producing Enterobacteriaceae constituted 13 strains. Moreover, of the 19 CRE isolates, 16 (81.25%) and 17 (88.24%) were identified from the direct cultures on MacConkey and CHROMID Carba media, respectively. After 3 h of enrichment, the proportions of the CRE identified in the media were: MacConkey medium, 16/19 (81.25%); CHROMID Carba medium, 17/19 (88.24%); and MacConkey medium containing an ertapenem disk, 17/19 (88.24%). The detection rates after 6 h of enrichment were the same for all three media (19/19 strains, 100%), whereas those after 24 h of enrichment were 21, 22, and 24 strains, respectively, but included false positives. These findings suggest that a 6-h enrichment before inoculation on the CHROMID Carba medium is optimal for the rapid and accurate detection of CRE in clinical samples.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2013

This review article summarizes metal-assisted chemical etching (MAC etch or MACE), an anisotropic etching method for Si, and describes principles, main factors, and recent achievements in literature. In 1990, it was discovered that, with metal catalyst on surface and $H_2O_2$/HF as etchant, Si substrate can be etched anisotropically, in even in solution. In contrast to high-cost vacuum-based dry etching methods, MAC etch enables to fabricate a variety of high aspect ratio nanostructures through wet etching process.

• Carbon letters
• /
• v.9 no.2
• /
• pp.108-114
• /
• 2008

We have demonstrated the feasibility of using electrospinning method to fabricate long and continuous composite nanofiber sheets of polyacrylonitrile (PAN) incorporated with zinc oxide (ZnO). Such PAN/ZnO composite nanofiber sheets represent an important step toward utilizing carbon nanofibers (CNFs) as materials to achieve remarkably enhanced physico-chemical properties. In an attempt to derive these advantages, we have used a variety of techniques such as field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and high resolution X-ray diffraction (HR-XRD) to obtain quantitative data on the materials. The CNFs produced are in the diameter range of 100 to 350 nm after carbonization at $1000^{\circ}C$. Electrical conductivity of the random CNFs was increased by increasing the concentration of ZnO. A dramatic improvement in porosity and specific surface area of the CNFs was a clear evidence of the novelty of the method used. This study indicated that the optimal ZnO concentration of 3 wt% is enough to produce CNFs having enhanced electrical and physico-chemical properties.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1800-1808
• /
• 2013

Dual-responsive amphiphilic block copolymers were synthesized by combining enzymatic ring-opening polymerization (eROP) of ${\varepsilon}$-caprolactone (CL) and ATRP of N,N-dimethylamino-2-ethyl methacrylate (DMAEMA). The obtained block copolymers were characterized by gel permeation chromatography (GPC), $^1H$ NMR and FTIR-IR. The critical micelle concentration (CMC) of copolymer was determined by fluorescence spectra, it can be found that with hydrophilic block (PDMAEMA) increasing, CMC value of the polymer sample increased accordingly, and the CMC value was 0.012 mg/mL, 0.025 mg/mL and 0.037 mg/mL for $PCL_{50}$-b-$PDMAEMA_{68}$, $PCL_{50}$-b-$PDMAEMA_{89}$, $PCL_{50}$-b-$PDMAEMA_{112}$, $PCL_{50}$-b-$PDMAEMA_{89}$ was chosen as drug carrier to study in vitro release profile of anti-cancer drug (taxol). The temperature and pH dependence of the values of hydrodynamic diameter (Dh) of micelles, and self-assembly of the resulting block copolymers in water were evaluated by dynamic light scattering (DLS). The result showed that with the temperature increasing and pH decreasing, the Dh decreased. Drug-loaded nanoparticles were fabricated using paclitaxel as model. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) had been explored to study the morphology of the hollow micelles and the nanoparticles, revealing well-dispersed spheres with the average diameters both around 80 nm. In vitro release kinetics of paclitaxel from the nanoparticles was also investigated in different conditions (pH and temperature, etc.), revealing that the drug release was triggered by temperature changes upon the lower critical solution temperature (LCST) at pH 7.4, and at $37^{\circ}C$ by an increase of pH.

• Journal of Power System Engineering
• /
• v.7 no.2
• /
• pp.11-16
• /
• 2003

Because of the advancement of digital computers and software technologies, simulation methods have been used to reduce time and costs. A lot of simulation methods have been developed for the improvement of charging efficiency on the intake and exhaust system of engines. In this study, as a basic step for the development of the gas flow simulation program for the intake and exhaust system, the gas flow in a pipe-orifice system was calculated with three algorithms(Method of Characteristics, MacCormack Method for conservation, and MacCoramck Method for nonconservation). The calculated results using three numerical algorithms were compared with measured result to verify the calculation accuracy.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.1
• /
• pp.5-16
• /
• 2002

Background : Though mononuclear phagocytes serve as the final effectors in killing intracellular Mycobacterium tuberculosis, the bacilli readily survive in the intracellular environment of resting cells. The mechanisms through which cellular activation results in the intracellular killing is unclear. In this study, we sought to explore an in vitro model of a low-level infection of human mononuclear phagocytes with MAC and $H_{37}Ra$ and determine the extent of the lymphocyte dependent cytotoxicity of human monocytes and alveolar macrophages. Materials and Methods : The peripheral monocytes were prepared using the Ficoll gradient method from PPD positive healthy people and tuberculosis patients. The alveolar macrophages were prepared from PPD positive healthy people via a bronchoalveolar lavage. The human mononuclear phagocytes were infected at a low infection rate (bacilli:phagocyte 1:10) with MAC(Mycobacterium avium) and Mycobacterium tuberculosis $H_{37}Ra$. Non-adherent cells(lymphocyte) were added at a 10:1 ratio. After 1,4, and 7 days culture in $37^{\circ}C$, 5% CO2 incubator, the cells were harvested and inoculated in a 7H10/OADC agar plate for the CFU assay. The bacilli were calculated with the CFU/$1{\times}10^6$ of the cells and the cytotoxicity was expressed as the log killing ratio. Results : The intracellular killing of MAC and $H_{37}Ra$ within the monocyte was greater in patients with tuberculosis compared to the PPD positive controls (p<0.05). Intracellular killing of MAC and $H_{37}Ra$ within the alveolar macrophage appeared to be greater than that within the monocytes of the PPD positive controls. There was significant lymphocyte dependent inhibition of intracellular growth of the mycobacteria within the monocytes in both the controls and tuberculosis patients and within the macrophages in the controls(p<0.05). There was no specific difference in the virulence between the MAC and the $H_{37}Ra$. Conclusion : This study is an in vitro model of a low-level infection with MAC and $H_{37}Ra$ of human mononuclear phagocytes. The intracellular cytotoxicity of the mycobacteria within the phagocytic cells was significantly lymphocyte dependent. During the 7 days culture after the intracellular phagocytosis, the actual confinement of the mycobacteria was observed within the monocytes of tuberculosis patients and the alveolar macrophages of the controls as in the case of adding lymphocytes.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.332-341
• /
• 2013

H-shaped amphiphilic pentablock copolymers $(PSt)_2-b-PCL-b-PEO-b-PCL-b-(PSt)_2$ was synthesized via chemoenzymatic method by combining enzyme-catalyzed ring-opening polymerization (eROP) of ${\varepsilon}$-caprolactone (${\varepsilon}$-CL) and atom transfer radical polymerization (ATRP) of styrene. By this process, we obtained copolymers with controlled molecular weight and low polydispersity. The structure and composition of the obtained copolymers were characterized by nuclear magnetic resonance (NMR), gel permeation chromatography (GPC) and infrared spectroscopy analysis (IR). The crystallization behavior of the copolymers was analyzed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The crystallization behavior of the H-shaped block copolymers demonstrated a PCL dominate crystallization. The self-assembly behavior of the copolymers was investigated in aqueous media. The hydrodynamic diameters of the copolymer micelles in aqueous solution were measured by dynamic light scattering (DLS). The morphology of the copolymer micelles was observed by atomic force microscopy (AFM) and transmission electron microscopy (TEM). The hydrodynamic diameters of spherical micelles declined gradually with the increase of the hydrophobic chain lengths of the copolymers. The critical micelle concentration (CMC) values were determined from fluorescence emission, and it was found that the CMCs decreased with an increase of PSt hydrophobic block lengths.

• Applied Chemistry for Engineering
• /
• v.30 no.4
• /
• pp.472-478
• /
• 2019

A stable desalination method of the hardness substance such as $Ca^{2+}$ by controlling the total charge (TC) supplied to the membrane capacitive deionization (MCDI) cell was studied. The adsorption (1.5 V) and desorption (0.0 V) were repeated 30 times while varying the TC in the adsorption process. The concentration and pH of effluent, adsorption and desorption amounts, current densities and cell potentials were analyzed in the desalination process. The maximum allowable charge (MAC) of the carbon electrode used in MCDI cell was measured to be 46 C/g. As a result of operation at TC (40 C/g) below the MAC value, electrode reactions did not occur, resulted in the stable desalination characteristics for a long-term operation. When operating at TCs (50, 60 C/g) above the MAC value, however, the concentration and pH of effluent varied greatly. Also, the scale was formed on the electrode surface due to electrode reactions, and the electric resistance of the cell gradually increased. It was thus concluded that it is possible to remove stably the hardness substance without any electrode reactions by controlling the charge supplied to MCDI cell during the adsorption process.