• Korean Journal of Organic Agriculture
• /
• v.22 no.1
• /
• pp.183-195
• /
• 2014

The present study was conducted to provide basic data for environmentally friendly treatment of manure using vermicomposting by investigating the influence of physiochemical property change during the composting period on the survival of earthworms after mixing cow manure in different levels (0(CSD0), 10(CSD10), 20(CSD20), 30(CSD30), and 40%(CSD40)) with the sawdust that is used bedding in livestock pens. As composting proceeds, earthworms were able to survive in all treatments after 3 weeks. In terms of the C/N ratio by treatment groups, the sawdust mix treatment was significantly higher than the CSD0 treatment (p<0.05). The C/N ratio in the 3rdweek when earthworms started surviving was 23.26-61.05. As composting progressed, pH and electrolytic conductivity were highest in the CSD0 treatment and tended to decrease with higher proportion of sawdust in the mix. It was found that pH and electrolytic conductivity that earthworms starting to survive are 7.4-7.7 and 0.28-1.17 mS/cm respectively. To summarize, when composing cow manure with various levels of sawdust mix, all physiochemical property changes turned out to allow the survival of earthworms, but the results suggest that efficient vermicomposting requires the tests to examine growth and reproduction according to the sawdust mix ratio.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.5
• /
• pp.65-72
• /
• 1994

We resolve the suboptimal $\infty$ control problem using (J,J')-lossless coprime factorization by transforming the linear fractional transformation (LFT) into chain scattering description (CSD) in discrete-time systems. The condition transformed LFT into CSD is that the inverse matrix of $P_{21}$ of standard plant exists. But, this paper presents the method of transforming LFT into CSD for 4-block problem in case that the inverse matrix of $P_{21}$ of standard plant does not exist and parameterization of the all suboptimal $\infty$T controllers using (J,J')-lossless coprime factorization. It is shown that this method can resolve the suboptimal $\infty$ control problem solving only two Riccati equations in discrete-time systems.

• Journal of computational fluids engineering
• /
• v.19 no.3
• /
• pp.62-68
• /
• 2014

The aerodynamic and noise calculations were performed through the CFD-CSD loose coupling methodology. In the loose coupling process, the trimmed rotor airloads were predicted by the in-house CFD code based on unstructured overset meshes, and the trim of the rotorcraft and the aeroelastic deformation of rotor blades were accounted with the CAMRAD II rotorcraft comprehensive code. The set of codes was used to analyze the HART-II baseline test condition. The effect of grid resolution and time step was examined and the loose coupling approach was found to be stable and convergent for the case. Comparison of the resulting sectional airloads, structural deformations, the noise carpets and the wake geometry with experimentally measured data was presented and showed the good agreement.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.174-177
• /
• 2011

In this paper, we investigate a method for designing FIR filters with CSD coefficients. Firstly, the H/W complexity of a CSD FIR filter is estimated in terms of number of gates. Using the estimated complexity, an optimal filter that can meet the required performance with minimal H/W complexity can be designed. Next, based on the MILP problem solver called BonsaiG, we present a filter design program. From the two design examples, it is demonstrated that an optimal filter can be obtained by comparing the complexity of the candidate filters in terms of the gate counts, whose differences are estimated to be about 400-600 gates.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.343-349
• /
• 2011

A loosely coupling method is adopted to combine a computational fluid dynamics (CFD) solver and the comprehensive structural dynamics (CSD) code, CAMRAD II, in a systematic manner to correlate the airloads, vortex trajectories, blade motions, and structural loads of the HART I rotor in descending flight condition. A three-dimensional compressible Navier-Stokes solver, KFLOW, using chimera overlapped grids has been used to simulate unsteady flow phenomena over helicopter rotor blades. The number of grids used in the CFD computation is about 24 million for the isolated rotor and about 37.6 million for the rotor-fuselage configuration while keeping the background grid spacing identical as 10% blade chord length. The prediction of blade airloads is compared with the experimental data. The current method predicts reasonably well the BVI phenomena of blade airloads. The vortices generated from the fuselage have an influence on airloads in the 1st and 4th quadrants of rotor disk. It appeared that presence of the pylon cylinder resulted in complex turbulent flow field behind the hub center.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.151-154
• /
• 1998

이중 전송율(5.3 과 6.3kbit/s)을 제공하는 G.723.1 음성 코더는 공중망을 통한 H.324 POTS 영상 회의 규격의 음성 코더로 채택된 것으로, MPMLQ, ACELP 알고리즘에 근거한다. 본 논문에서는 Annex A를 포함한 G.723.1 음성 코더 알고리즘을 C&S Technology에서 개발한 음성 신호 처리를 위한 범용 DSP인 CSD17C00 칩을 이용하여 실시간 응용이 가능하도록 구현하였다. G.723.1 에 대한 양방향 평가가 Codec loopback을 통해 수행되었으며, ITU에서 제공한 테스트 절차에 따라 평가되었다. 또한, 본 논문에서 구현된 G.723.1 음성 코더는 27MIPS의 계산 속도를 갖으며, 프로그램 ROM의 크기는 8.85K Words이고, 10K 데이터 ROM과 4K 데이터 RAM을 필요로 하고 있다. 경쟁 제품과의 MOS 측정 음질 평가를 실시한 결과, CSD17C00에서의 음질 성능이 더 우수함을 입증 함으로써, 본 논문에서 보여준 CSD17C00을 기반으로 구현된 G.723.1 알고리즘의 실시간 구현기술의 타당성을 검증하게 되었다.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.3
• /
• pp.349-360
• /
• 2012

In this study, the accuracy of CSD (Comprehensive Structural Dynamics) analysis on the evaluation of blade aeroelastic responses and structural loads of HART(Higher harmonic Aeroacoustic Rotor Test) II baseline rotor is assessed using a comprehensive rotorcraft dynamics code, CAMRAD II, and a nonlinear flexible multi-body dynamics analysis code, DYMORE. Considering insufficient measurement data for HART II rotor, prescribed airloads computed by a three-dimensional compressible flow solver KFLOW are used to replace the lifting-line airloads and thereby enhance the prediction capability of the comprehensive analyses. The CSD results on blade elastic deflections using the prescribed airloads indicate more oscillatory behavior than those by lifting-line based approaches, but the wave pattern becomes improved by including artificial damping into the rotor system. It is demonstrated that the structural load predictions are improved significantly by the prescribed airloads approach against the measured data, as compared with an isolated CSD analysis.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.96-99
• /
• 2008

본 논문은 의료 영상을 효과적으로 분류하고 검색 하기 위한 새로운 알고리즘을 제안한다. 의료 영상 중 X-Ray 영상은 어두운 배경에 반해 밝은 전경을 갖고 있기 때문에, 전경의 두드러진 부분에서만 시각 기술자로 추출한다. 우선, 색 구조 기술자(H-CSD)에서 해리스 코너 검출기로 검출한 관심 포인트들에서 색상 특징을 추출하고, 경계선 히스토그램 기술자에서 영상의 전역 및 지역적 질감 특징을 추출한다. 추출된 특징 벡터는 멀티클래스 SVM 에 적용되어 각 영상을 위한 멤버십 스코어를 얻는다. 이후, H-CSD와 EHD 에 대한 SVM 의 멤버십 스코어를 앙상블 결합하여 하나의 특징 벡터로 생성하고, K-nearest Neighborhood 방법을 이용하여 상위-K 개의 영상을 검색을 하도록 하였다. imageCLEFmed2007 을 이용한 실험 결과에서 다른 전역적 속성 또는 분류 기반 검색 방법에 비교하여 보다 개선된 검색 성능을 나타냄을 확인하였다.

• Korean Chemical Engineering Research
• /
• v.44 no.3
• /
• pp.289-293
• /
• 2006

In the CMSMPR (continuous mixed suspension mixed product removal)system, the effect of temperature and RPM on the CSD (crystal size distribution) in the calcium carbonate process was investigated. In the steady state operation, the change of solution pH was small. At the low temperature and below 300 RPM, volume mean size change of calcium carbonate was stable and CSD was narrow. In the SEM view, calcite and aragonite was obtained.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.165-168
• /
• 1998

제안하고 있는 CSD17C00 chip은 C&S technology에서 개발한 것으로, 음성 신호 처리를 위해 범용으로 구현되었으며, 16 bit 40 MIPS DSP group OAK DSP Core를 포함, 이에 Miscellaneous Logic, Serial Port, Host Interface, Timer, Compander 의 5가지 Peripherals 과 범용 I/O Ports 로 설계되었다. 1차적으로 CSD17C00 Chip 의 성능을 점검하였다. 그 결과, 응용 프로그램은 28MIPS의 계산속도를 갖으며, 프로그램 ROM 크기는 8.85KWords 이고, 10KWords 의 데이터 ROM 과 4KWords 데이터 RAM을 필요로 한다. CSD17C00 CHIP은 멀티미디어 통신용 VOCODER 개발을 위한 범용성을 갖추고 있으며, VOCODER 용 S/W 개발 환경 및 H/W 구조가 여타 범용 DSP에 비해편의성고 K합리성을 제공하도록 설계되어 있다. 따라서, 이를 이용한다면, 멀티 미디어 통신용 VOCODER, INTERNET PHONE CO-PROCESSOR, DIGITAL RECODER, MPEG AUDIO ENCODER & DECODER 등 다양한 제품으로의 응용이 가능할 것으로 전망된다.