• Journal of the Korean Society of Tobacco Science
• /
• v.18 no.1
• /
• pp.85-91
• /
• 1996

Commercially available activated carbon was treated with 0.2N NaOH/0.1N HCl to decrease the ash contents and to analyze the effect of demineralization. We have studied their properties and adsorptivity to solvents such as benzene, acetone, toluene and carbon tetrachloride, ammonia and also aldehydes of cigarette smoke. By demineralization with NaOH/HCl, surface area and pore volume were increased up to 10 - 20% according to developement of micro-pore and pH of activated carbon was also changed from 10.2 to 6.3. Surface acidity of the activated carbon treated with chemicals increased slightly. The chemical treatment led to small increase in adsorptioil properties of solvents, ammonia and aldehydes of cigarette smoke, but content of chlorine and sulfur in activated carbon were reduced. As the results of smoking test, charcoal taste caused by the activated carbon was reduced significantly by the treatment with NaOH/HCl.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1381-1385
• /
• 2006

Cobalt (cyclam) complex has been successfully immobilized onto SBA-15, and proven to be an active catalyst for the epoxidation of styrene with tert-butyl hydroperoxide as a terminal oxidant. The selectivity for styrene oxide was observed to be up to 66% with 40% styrene conversion after 12h reaction time. The reversible redox cycle between Co(III) and Co(II) couple which was supposed to play key role during the epoxidation reaction was supported by a cyclic voltametry analysis. The textural properties of the catalyst was characterized by XRD, N2 adsorption-desorption, and TEM analysis.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2642-2646
• /
• 2012

Pretreatment of spent FCC catalyst and its application in remove trace olefins in aromatics were investigated in this research. The most effective pretreatment route of spent FCC catalyst was calcining at $700^{\circ}C$ for 1 h, washing with 5% oxalic acid solution in ultrasonic reactor and dried. Treated spent FCC catalyst was modified with metal halides, then to prepare catalyst to remove trace olefins in aromatics. X-ray diffraction, Pyridine-FTIR, $N_2$ adsorption-desorption and inductively coupled plasma optical emission spectrometer (ICP-OES) were used to investigate the pretreatment process. The result showed that the performance of the treated spent FCC catalyst was much greater than that of the spent FCC catalyst, which indicted the possibility and improvement of this research.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.5
• /
• pp.573-579
• /
• 2004

Electroflotation, which is used as an alternative to sedimentation, is a separation treatment process that uses small bubbles to remove low-density particulates. Making allowances for recent collision efficiency diagram based on trajectory analysis, it is necessary to tailor zeta potential of bubbles that collide with negatively charged particles. In this paper, the study was performed to investigate the effects of magnesium and aluminium ions on zeta potential of bubbles. And, it was studied to find out factors which could affect the positively charged bubbles. Consequently, zeta potential of bubbles increased both with higher concentration of metal ions and in the acidic pH value. And, a probable principle that explained the procedure of charge reversal could be a combined mechanism with both specific adsorption of hydroxylated species and laying down of hydroxide precipitate. It also depended on the metal ion concentration in the solution to display its capacity to control the bubble surface.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.1978-1980
• /
• 2009

A mesostructured form of carbon was fabricated from a template of mesostructured silica by using pentane, an aliphatic hydrocarbon precursor. To synthesize the mesostructured silica, a buffered (pH of 6.5) mixture of nonionic Pluronic P123 surfactant, sodium silicate, and acetic acid were used. The impregnated silica with Fe$(CO)_5$ (wt 5%) and pentane was placed in a quartz tube, treated with pentane vapor at 800 ${^{\circ}C}$ for two hours to synthesize the mesostructured carbon. The XRD patterns of the carbon replica in the low/wide angle regions, its TEM images, and nitrogen adsorption-desorption isotherm revealed that the long-range framework order of mesostructure with the pore size centered on 2.8 nm was maintained to some extent mainly due to some portions of mesophase carbon that work as a support to fix the hexagonal frameworks by anchoring on the pore surface with an improved graphitic character. The dc conductivity of the mesostructured carbon in pressed powder form at 6.0 MPa was 2.08 S/cm.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1177-1180
• /
• 2003

Thallium is quantitatively retained by 1,10-phenanthroline and tetraphenylborate onto benzophenone in the pH range 0-11 from a large volumes of aqueous solutions of various samples. After filtration, the solid mass consisting of thallium complex and benzophenone is dissolved with 5 mL of dimethylformamide and the metal was determined by flame atomic absorption spectrometric. About 0.4 ㎍ of thallium can be concentrated from 400 mL of aqueous sample, where its concentration is as low as 1.0 ng/mL. Eight replicate determinations of 8.0 ㎍/mL of thallium in final dimethylformamide solution gave a mean absorbance of 0.160 with a relative standard deviation of 1.7%. The sensitivity for 1% absorption was 0.22 ㎍/mL. The interference of a large number of anions and cations has been studied and the optimized conditions developed were utilized for the trace determination of thallium in various alloys and biological samples.

• Journal of the Korean Ceramic Society
• /
• v.24 no.3
• /
• pp.215-222
• /
• 1987

${\alpha}$-Ferric Hydrous Oxide and ${\alpha}$-Ferric Oxide were obtained as following processes that Ferric Nitrate solution was adjusted to pH 6-8 with Ammonium Hydroxide, refluxed the Iron precipitate for 1 hr. at 80$^{\circ}C$, washed it with water and Methanol (95%), dried it to obtain ${\alpha}$-Ferric Hydrous Oxide at 60$^{\circ}C$, and then heated in atmosphere to prepare ${\alpha}$-Ferric Oxide for 1 hr. at 450$^{\circ}C$. Mica particles cleaned with ultrasonicator (45KHz) in water were mixed with Ferric Nitrate solution and treated it to adsorb ${\alpha}$-Ferric Oxide on the surface of mica particles by using the abovementioned processes, but the heated temperature was at 500$^{\circ}C$. The maximum wavelength of reflected light on the surface of mica-${\alpha}$-Ferric Oxide (50%) was appeared at 546nm but -Ferric Oxide free mica only was at 436 nm. The maximum wavelength was shifted to longer when the weight ratios of ${\alpha}$-Ferric Oxide to mica was changed from 1% to 50%.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.11
• /
• pp.1604-1610
• /
• 2002

In the present work, we studied thiram on silver surface by SERS. Investigations of disulfides with SERS revealed that the molecules undergo a surface reaction on silver, namely easy cleavage of the S-S bond. We believe that the two S atoms of resonance formed from the thiram may be chemisorbed strongly on Ag sol. This resonance form adheres perpendicularly to the Ag surface via the two S atoms, since the ${\delta}(CH3)$ and n (CN) mode perpendicular to the surface showed strong enhancement. The important roles of halide anion adsorption have been discussed and the pH effects of thiram on Ag sol in acidic, neutral, and alkaline conditions were examined.

• Food Science and Biotechnology
• /
• v.16 no.3
• /
• pp.398-403
• /
• 2007

The effectiveness of phage biocontrol depends on the activity of bacteriophage in a given environment. In order to investigate the infectivity and the stability of bacteriophages in representative environments, three virulent phages, Listeria phage A511, Salmonella phage Felix O1, and Escherichia coli phage T7, were subjected to different temperatures, pHs and salt concentrations (NaCl). Phage infectivity was also determined in the presence of divalent cations ($Mg^{2+}$ or $Ca^{2+}$). As a result, three phages exhibited a wide range of survival rates under various environments. Phage infectivity was directly correlated with bacterial growth under the applied conditions. One exception was Felix O1 that did not kill Salmonella grown in low pH (4.5). The failure was attributed to defective adsorption of Felix O1. This finding is significant as it provides an explanation for the inefficient phage biocontrol. Therefore, such information is crucial to improve phage biocontrol of pathogens.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.127-130
• /
• 2002

Recently, the contamination with heavy metals in closed mines has been seriously considered since it can disturb human health through the polluted drinking-water and crops. Therefore, the concerns about the remediation of polluted land and treatment technology for hazardous matters have been accelerated. However, any of practical methods for treatment and/or remediation have not been yet suggested. In this research, a novel technology was studied to immobilize arsenic in tailings and soils disturbed by mining. In this technology, Fenton-like reaction were applied to immobilize arsenic in tailings. In the examination of Fenton-like reaction using pure pyrite, $H_2O$$_2$ and arsenic, the concentrations of extracted arsenic and iron were reduced up to 90 and 75%, respectively From the result of SEM-EDS, the Immobilization of arsenic was observed on the surface of pyrite. Thus, it can be said that the coating and/or adsorption prevents the extraction of arsenic.