• 소성∙가공
• /
• 제17권8호
• /
• pp.600-606
• /
• 2008

In closed-die hot forging, a billet is formed in dies such that the flow of metal from the die cavity is restricted. Some parts can be forged in a single set of dies, whilst others, due to shape complexity and material flow limitations, must be shaped in multi sets of dies. The purpose of a performing operation is to distribute the volume of the parts such that material flow in the finisher dies will be sound. This study focused on the design of preforms, flash thickness and land width by theoretical calculation and finite element analysis, to manufacture the super hot forging product, 70MC type piston crown used in marine engine. The optimal design of preforms by the finite element analysis and the design experiment achieves adequate metal distribution without any defects and guarantees the minimum forming load and fully filling of the cavity of the die for producing the large piston crown. The maximum loads obtained by finite element analysis are compared with the results of experiments. The loads of the analysis have good agreements with those of the experiment. Results obtained using DEFORM-2D enable the designer and manufacturer of super hot forging dies to be more efficient in this field.

• 전자공학회논문지 IE
• /
• 제45권4호
• /
• pp.1-6
• /
• 2008

본 연구에서는 MB-OFDM UWB 응용을 위하여 복잡도를 낮추고 전력소모를 줄인 고속 스위칭 주파수 합성기를 다룬다. 제안된 구조는 밴드 그룹 1 주파수를 생성하기 위하여 3960 MHZ LC VCO, 528 MHz 링 오실레이터, 수동 믹서 및 LC-조정 Q-향상 BPF를 사용한다. 인접 채널 제거비는 3432 MHz 신호에서 -40 dBc 이하, 그리고 4488 MHz 신호에서 -44 dBc 이하의 특성을 확인하였다. 요구되는 출력 신호를 얻기 위하여 SCL 구조의 고속 스위칭 MUX를 사용하여 2.2 ns 이하의 밴드 스위칭 시간을 얻었다. 전체 전력 소모는 1.8 V 전원을 사용하여 47.9 mW이다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 추계학술대회
• /
• pp.145-150
• /
• 1993

It is an important component of the diagnosis to research the morphological changes of EMG in pathological conditions. In order to provide an EMG signal resulting from a predetermined neuromuscular pathophysiology, we have initially developed a mathmatical model of electromyographic interference pattern(IP). It can be used to study the variation of the IP resulting from morphological and electrophysiological changes occurring in disease states, because the model computes the IP from the underlying fiber and muscle structure. We performed quantative analysis or the model output, focusing on IPs resulting from simulations of dystrophic fiber loss and the MU denervation and reinnervation typical of neuropathies. To discribe the characteristics of IPs associated with these pathologies, a set of frequency domain discriptors, activity, mobility, and complexity were used, as well as several measures of the spectral density function. These discriptors demonstrate distinct patterns of variation corresponding to morphological changes observed in disease states, and closely with results obtained from the classical method, turn/amp technique.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.607-610
• /
• 2002

Even though digital video coding techniques have been developed very rapidly, rate controlling is still an unsolved problem. This paper presents a new scene adaptive video encoding scheme for MPEG-1 and MPEG-2 video encoders. Degradation of picture quality at scene changes due to poor prediction of global complexity measure is addressed. The proposed scheme determines the picture types adaptively based on scene contents of each video frame. The effective placement of reference and inter-reference frames is studied at sudden scene changes and gradual scene changes respectively. Results show that the proposed scheme demonstrates a significant improvement in performance compared to TM5〔1〕.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권4호
• /
• pp.181-186
• /
• 2009

This paper presents an efficient synchronizer architecture using a common autocorrelator for Digital Video Broadcasting via Satellite, Second generation (DVB-S2). To achieve the required performance under the worst channel condition and to implement the efficient H/W resource utilization of functional synchronization blocks, we propose a new efficient common autocorrelator structure. The proposed architecture can decrease about 92% of multipliers and 81% of adders compared with the direct implementation. Moreover, the proposed architecture has been thoroughly verified in XilinxTM Virtex IV and R&STM SFU (Signaling and Formatting Unit) broad-cast test equipment.

• 한국통신학회논문지
• /
• 제29권5B호
• /
• pp.491-497
• /
• 2004

본 논문에서는, 인터넷 백본 네트워크상에서 악성의 네트워크 공격 트래픽을 고립시킴으로서 네트워크 인프라를 보호하기 위한 트래픽 제어 방법을 제안한다. 제안된 방법은 개별 플로우 또는 개별 패킷들에 기반을 둔 기존의 방법들과 달리 제안된 공격 탐지 및 제어 방법은 집합된 트래픽 수준에서 운영되므로 계산의 복잡성을 현저히 줄일 수 있으므로 네트워크 공격에 대한 전역 인프라 구축에 활용 가능하다. 실험 결과는 제안된 방법에 의한 트래픽 제어가 네트워크 공격이 이루어질 시 정상 트래픽과 네트워크 자원들을 적절히 보호할 수 있음을 보여준다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 압출 및 인발 심포지엄
• /
• pp.83-88
• /
• 1999

This study presents development of an software for process and die design of hot extrusion through square dies. The design of extrusion dies is still an art rather than a science with increasing complexity of shape and thinness of section. Therefore, most of the die design is still dependent on personal judgement, intuition and experience. The objective of this study is to develop an software system which includes a design rule extracted from literatures and experts in the extrusion industry. The system also includes finite element simulation program. The developed system is effectively used to design extrusion processes and dies with lead time and trial extrusion.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.243-258
• /
• 2009

Bearingless centrifugal pump systems are employed in the semiconductor, pharmaceutical and medical industries due to their facility for pumping high purity fluids without particle contamination. Two types of forces have to be generated by the stator units, namely bearing forces for achieving magnetic levitation, and drive forces for producing the needed pump torque. The generation of these forces requires bearing and drive windings, which can be realized as separate bearing and drive coils or as identical, combined coils on the stator claws. In this paper, a detailed comparison between these two winding concepts is undertaken, whereby the copper losses, the power electronics losses, and the achievable pump output pressure are evaluated for both concepts. For each criterion a ratio of improvement is calculated analytically which allows evaluation of the performance of the two winding concepts for any given pump operating point and design. Finally, also practical features such as control complexity, cabling effort and manufacturability are discussed and measurements on prototype systems are carried out to validate the considerations.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.208-214
• /
• 2005

A number of watermark insertion method is proposed for the protection of audio contents such as MP3 music. In this paper, we propose a VLSI architecture that performs embedding watermark to the audio signal based on the scheme that proposed by XUEYAO LI[1]. This architecture is implemented and simulated in Verilog HDL. This watermark embedding method used a visually recognizable binary image. Despite a unit that determines the watermark embedded intensity is removed to archive low complexity of H/W, our experimental results show that watermarked signal is perceptually transparency and robust to several known attacks.

• 대한산업공학회지
• /
• 제19권4호
• /
• pp.3-11
• /
• 1993

We propose a new dual simplex method using a primal interior point. The dropping variable is chosen by utilizing the primal feasible interior point. For a given dual feasible basis, its corresponding primal infeasible basic vector and the interior point are used for obtaining a decreasing primal feasible point The computation time of moving on interior point in our method takes much less than that od Karmarker-type interior methods. Since any polynomial time interior methods can be applied to our method we conjectured that a slight modification of our method can give a polynomial time complexity.