• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.430-430
• /
• 2008

Using multi plasma enhanced chemical vapor deposition system (Multi-PECVD), p-a-Si:H deposition layer as a $p^+$ region which was annealed by laser (Q-switched fiber laser, $\lambda$ = 1064 nm) on an n-type single crystalline Si (100) plane circle wafer was prepared as new doping method for single crystalline interdigitated back contact (IBC) solar cells. As lots of earlier studies implemented, most cases dealt with the excimer (excited dimer) laserannealing or crystallization of boron with the ultraviolet wavelength range and $10^{-9}$ sec pulse duration. In this study, the Q-switched fiber laser which has higher power, longer wavelength of infrared range ($\lambda$ = 1064 nm) and longer pulse duration of $10^{-8}$ sec than excimer laser was introduced for uniformly deposited p-a-Si:H layer to be annealed and to make sheet resistance expectable as an important process for IBC solar cell $p^+$ layer on a polished n-type Si circle wafer. A $525{\mu}m$ thick n-type Si semiconductor circle wafer of (100) plane which was dipped in a buffered hydrofluoric acid solution for 30 seconds was mounted on the Multi-PECVD system for p-a-Si:H deposition layer with the ratio of $SiH_4:H_2:B_2H_6$ = 30:120:30, at $200^{\circ}C$, 50 W power, 0.2 Torr pressure for 20 minutes. 15 mm $\times$ 15 mm size laser cut samples were annealed by fiber laser with different sets of power levels and frequencies. By comparing the results of lifetime measurement and sheet resistance relation, the laser condition set of 50 mm/s of mark speed, 160 kHz of period, 21 % of power level with continuous wave mode of scanner lens showed the features of small difference of lifetime and lowering sheet resistance than before the fiber laser treatment with not much surface damages. Diode level device was made to confirm these experimental results by measuring C-V, I-V characteristics. Uniform and expectable boron doped layer can play an important role to predict the efficiency during the fabricating process of IBC solar cells.

• Korean Journal of Plant Resources
• /
• v.26 no.4
• /
• pp.503-510
• /
• 2013

This study was conducted to determine the optimum intensity of root pruning and the initial seedling size of 1-year-old Quercus serrata for producing 2-year-old healthy seedlings. Large( > 26 cm hight) and small size ( < 24 cm hight) seedlings were pruned their root by the length of 5, 10, and 15cm and then transplanted on nursery. Stem height, root-collar diameter(RCD), height to RCD ratio(H/D ratio), shoot dry weight(DW) and root development were measured during first growing season after transplanting. Seedling size and pruning intensity influenced on shoot growth such as height, RCD, H/D ratio and DW after transplanting. In addition, the development of lateral roots such as number, length, DW and diameter were affected by the seedling size. Taproot pruned by 15cm was shown excellent above-ground growth in large seedling group, but pruned by 10 and 15cm showed respectively better shoot growth in small seedling group. Large seedlings increased their above-ground growth, taproot regrowth, and number of lateral roots more than those of the small seedlings. But the length and DW of lateral roots were increased in the small seedlings. In conclusion, in order to produce high quality 2-year-old seedlings, it is important to produce large size of Q. serrata seedlings. Also root pruning length of 1-year-old Q. serrata was reasonable on 15 cm in taller than 26 cm or 10cm in less than the height.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.3
• /
• pp.219-226
• /
• 2014

Evaluation of tree responses to temperature elevation is critical for a development of forest management techniques coping with climate change. We conducted a study on the growth responses of Betula costata, Fraxinus rhynchophylla, and Quercus variabilis seedlings to open-field artificial warming. Artificial warming set-up using infra-red heater was built in 2012 and the temperature in warmed plots was regulated to be consistently $3^{\circ}C$ higher than that of control plots. The seeds of three species were sown, and the responses of growth, biomass allocation, and net photosynthetic rate of newly-germinated seedlings on the open-field artificial warming were determined. As a result, the growth responses of the seedlings differed with the species. B. costata showed decreases in the height to diameter ratio (H/D ratio), biomass, root weight to shoot weight ratio, and net photosynthetic rate. However, root collar diameter (RCD), height, biomass, and net photosynthetic rate of Q. variabilis were increased, while the response of F. rhynchophylla was rather obscure. There was no significant difference between warmed and control plots in seedling growth for 3 species in July, whereas, RCD, height, and H/D ratio of Q. variabilis were increased and H/D ratio of B. costata was decreased in November under warming. Species-specific growth responses to warming were similar to the species-specific responses of net photosynthetic rate and biomass allocation; therefore, net photosynthetic rate and biomass allocation might attribute to growth responses to warming. Besides, a relatively obvious response in autumn compared to summer might be affected by the phenological change following artificial warming. Species-specific responses of three deciduous species to warming in this study could be applied to the development of adaptive forest management policies to climate change.

• Journal of Ecology and Environment
• /
• v.42 no.1
• /
• pp.1-11
• /
• 2018

Background: In the study, the effects of elevated $CO_2$ and temperature on the nitrogen content, carbon content, and C:N ratio of seven rare and endangered species (Quercus gilva, Hibiscus hambo, Paliurus ramosissimus, Cicuta virosa, Bupleurum latissimum, Viola raddeana, and Iris dichotoma) were examined under control (ambient $CO_2$ + ambient temperature) and treatment (elevated $CO_2$ + elevated temperature) for 3 years (May 2008 and June 2011). Results: Elevated $CO_2$ concentration and temperature result in a decline in leaf nitrogen content for three woody species in May 2009 and June 2011, while four herb species showed different responses to each other. The nitrogen content of B. latissimum and I. dichotoma decreased under treatment in either 2009 and 2011. The leaf nitrogen content of C. virosa and V. raddeana was not significantly affected by elevated $CO_2$ and temperature in 2009, but that of C. virosa increased and that V. raddeana decreased under the treatment in 2011. In 2009, it was found that there was no difference in carbon content in the leaves of the six species except for that of P. ramosissimus. On the other hand, while there was no difference in carbon content in the leaves of Q. gilva in the control and treatment in 2011, carbon content in the leaves of the remaining six species increased due to the rise of $CO_2$ concentration and temperature. The C:N ratio in the leaf of C. virosa grown in the treatment was lower in both 2009 and 2011 than that in the control. The C:N ratio in the leaf of V. raddeana decreased by 16.4% from the previous year, but increased by 28.9% in 2011. For the other five species, C:N ratios increased both in 2009 and 2011. In 2009 and 2011, chlorophyll contents in the leaves of Q. gilva and H. hamabo were higher in the treatment than those in the control. In the case of P. ramosissimus, the ratio was higher in the treatment than that in the control in 2009, but in 2011, the result was the opposite. Among four herb species, the chlorophyll contents in the leaves of C. virosa, V. raddeana, and I. dichotoma did not show any difference between gradients in 2009, but decreased due to the rise of $CO_2$ concentration and temperature in 2011. Leaf nitrogen and carbon contents, C:N ratio, and chlorophyll contents in the leaves of seven rare and endangered species of plant were found to be influenced by the rise and duration of $CO_2$ concentration and temperature, species, and interaction among those factors. Conclusions: The findings above seem to show that long-term rise of $CO_2$ concentration, and temperature causes changes in physiological responses of rare and endangered species of plant and the responses may be species-specific. In particular, woody species seem to be more sensitive to the rise of $CO_2$ concentration and temperature than herb species.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.8 no.2
• /
• pp.31-43
• /
• 2002

The subjects of this study were 15 woman soccer players and 15 untrained woman students at H-Cheju University. Each subject was measured on the muscle strength and peak torque of knee extensors and knee flexors with isokinetic load ($60^{\circ}$/sec, $180^{\circ}$/sec). The results were as follows: 1. There was no significant difference between right and left leg strength measured isokinetically in each group. 2. The peak torque of knee extensors and flexors was significantly higher in scoccer players than untrainded students (p<0.001). 3. For the angle of knee joint showing the highest peak torque, there was significant difference between soccer players and untrained students in knee extensors(p<0.05) and right flexors (p<0.01). 4. For knee H/Q ratio, there was significant difference between two groups(p<0.05). 5. For the total work and average power at $180^{\circ}$/sec, there was significant difference between two groups in knee extensors(p<0.001) and flexors(p<0.01). 6. In soccer players at $60^{\circ}$/sec, there were significant correlations between peak torque and height and between peak torque and weight.(p<0.001). 7. For the muscular contraction velocity at $60^{\circ}$/sec, there was significant difference between two groups in flexors (p<0.01). 8. For the muscular indurance at $180^{\circ}$/sec in extensors and flexors, there was no significant difference between two groups(p<0.05). In conclusion, there were significantly higher in peak torque, contraction velocity, knee joint's angle with the highest peak torque, H/Q ratio, total work and average power in woman scoccer player than general students. But there was no significant difference in muscular endurance. Soccer performance is based on the various components including muscular endurance that is one of the most important components. So it is necessary that the training method to improve the various components (especially including muscular endurance) should be done.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1587-1593
• /
• 2007

A single factorial experiment was conducted to test the effects of three dietary levels of energy on mRNA expression of fatty acid synthase (FAS-mRNA) and hormone-sensitive lipase (HSL-mRNA) and their association with intramuscular fat in finishing pigs. 72 crossbred (Large $White{\times}Rongchang$) barrows with an average initial body weight of 20.71 (s.e. 0.1) kg, were randomly allotted to three dietary treatments (11.75, 13.05 and 14.36 MJ DE/kg) and fed until slaughtered at 100 or 101 kg. The diets were iso-nitrogenous and iso-essential amino acids. The growth performances including the duration of finishing were changed linearly (p<0.05) or quadratically (p<0.05) with increased dietary energy levels. The effects of dietary energy content on the percentage of external fat, intramuscular backfat and the fat thickness were linear (p<0.05). The content of dietary energy increased FAS-mRNA linearly or quadratically, while HSL-mRNA decreased linearly or quadratically in backfat and Longissmus dorsi muscle. Meanwhile, significant positive correlations (p<0.05) were found between energy level and intramuscular fat, FAS-mRNA or the ratio of FAS-mRNA to HSL-mRNA, between the ratio of FAS-mRNA to HSL-mRNA and intramuscular fat. However, the correlations between HSL mRNA and dietary energy or intramuscular fat were negative (p<0.05). The results indicated that dietary energy level regulates lipid accumulation, especially intramuscular fat, possibly by modulating the mRNA of FAS and HSL together rather than individually.

• Korean Journal of Veterinary Research
• /
• v.32 no.3
• /
• pp.451-456
• /
• 1992

Seventeen antiserum identified by stormont method were used for investigation of appearance type of red blood cell in Cheju horse. Phenotype $A_1$, A', Z, $ZZ_2$, C, K, $P_1$, Q, R, S, $U_2$, X and $N_1$ were classified by Hemolytic reaction and agglutination in $E_2$, H, J and $T_1$, Hokkaido horse and Thoroughbred horse were compared with the type of red blood cell. The results obtained are as follows ; 1. According to the appearance frequency of red blood cell the phenotypes could be classified by 6 groups among horses tested; I group : C, $A_1$, $ZZ_2$, $E_2$, S, Q, II : $P_1$, $U_2$, X, III : A', R, IV : $T_1$, K, V : H, J, VI, $N_1$, Z. 2. In group I the type of C, $A_1$ and $ZZ_2$ showed the Similar frequency among horses but the type of $E_2$, S and Q was lower in Cheju horse than Hokkaido and Thoroughbred horse. 3. In group II there was no differences in the type of $P_1$ and among three species, but Thoroughbred horse was lowest as 11.2 percent than Cheju and Hokkaido horse. 4. The type of $U_2$ and X were highest in Cheju and Hokkaido horse but lowest in Thoroughbred horse. 5. The type of A' and R observed higher appearance frequency in Hoklcaido horse but in the Thoroughbred and Cheju horse appearance ratio were Strikingly lowered. 6. The type of $T_1$ and K was shown higher appearance frequency in Cheju and Thoroughbred horse similarily but lowered in Hokkaido horse. 7. In group V the type of H and J showed similarily as 30 to 40 percent in Cheju and Thoroughbred but no observation in Hokkaido horse. 8. The type of $N_1$ and Z which are group VI was great difference between Cheju and Hokkaido horse but higher in Hokkaido than Cheju horse while there was no observation in thoroughbred horse.

• Journal of The Korean Astronomical Society
• /
• v.45 no.2
• /
• pp.39-48
• /
• 2012

We investigate non-LTE effects on the $H_3^+$ level populations to help the analysis of the observed 2 and 3.5 micron $H_3^+$ emissions from the Jovian ionosphere. We begin by constructing a simple three-level model, in order to compute the intensity ratio of the R(3,4) line in the hot band to the Q(1,0) line in the fundamental band, which have been observed in the Jovian auroral regions. We find that non-LTE effects produce only small changes in the intensity ratios for ambient $H_2$ densities less than or equal to $5{\times}10^{11}cm^{-3}$. We then construct two comprehensive models by including all the collisional and radiative transitions between pairs of more than a thousand known $H_3^+$ rovibrational levels with energies less than 10000 $cm^{-1}$. By employing these models, we find that the intensity ratios of the lines in the hot and fundamental bands are affected greatly by non-LTE effects, but the details depend sensitively on the number of collisional and radiative transitions included in the models. Non-LTE effects on the rovibrational population become evident at about the same ambient $H_2$ densities in the comprehensive models as in the three-level model. However, the models show that rotational temperatures derived from the intensities of rotational lines in the ${\nu}_2$ and $2{\nu}_2$ bands may differ significantly from the ambie temperatures in the non-LTE regime. We find that significant non-LTE effects appear near and above the $H_3^+$ peak, and that the kinetic temperatures in the Jovian thermospheric temperatures derived from the observed line ratios in the 2 and 3.5 micron $H_3^+$ emissions are highly model dependent.

• Structural Engineering and Mechanics
• /
• v.35 no.2
• /
• pp.191-203
• /
• 2010

To investigate the critical buckling load and post-buckling behavior of an axially loaded pile entirely embedded in soil, the non-linear large deflection differential equation for a pinned pile, based on the Winkler-model and the discretionary distribution function of the foundation coefficient along pile shaft, was established by energy method. Assuming that the deflection function was a power series of some perturbation parameter according to the boundary condition and load in the pile, the non-linear large deflection differential equation was transformed to a series of linear differential equations by using perturbation approach. By taking the perturbation parameter at middle deflection, the higher-order asymptotic solution of load-deflection was then found. Effect of ratios of soil depth to pile length, and ratios of pile stiffness to soil stiffness on the critical buckling load and performance of piles (entirely embedded and partially embedded) after flexural buckling were analyzed. Results show that the buckling load capacity increases as the ratios of pile stiffness to soil stiffness increasing. The pile performance will be more stable when ratios of soil depth to pile length, and soil stiffness to pile stiffness decrease.

• Earthquakes and Structures
• /
• v.11 no.4
• /
• pp.665-680
• /
• 2016

This paper focuses on the study of seismic behavior of steel reinforced concrete special-shaped column-beam joints. Six specimens, which are designed according to the principle of strong-member and weak-joint core, are tested under low cyclic reversed load. Key parameters include the steel form in column section and the ratio of column limb height to thickness. The failure mode, load-displacement curves, ductility, stiffness degradations, energy dissipation capacity and shear deformation of joint core of the test subassemblies are analyzed. The results indicate that SRC special-shaped column-beam joints have good seismic behavior. All specimens failed due to the shear failure of the joint core, and the failure degree between the two sides of joint core is similar for the exterior joint but different for the corner joint. Compared to the joints with channel steel truss, the joints with solid web steel skeleton illustrate better ductility and energy dissipation capacity, but the loading capacity and stiffness are roughly close. With the increasing of the ratio of column limb height to thickness, the joints illustrate higher loading capacity and stiffness, better energy dissipation capacity, but worse ductility.