• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.10
• /
• pp.1409-1415
• /
• 2021

The Gysel divider has the advantage of easily setting the resistor in the circuit. If the line impedance in the Gysel divider is set differently, the input signal can be distributed to the two output ports at various distribution ratios. This paper proposes the Gysel divider that can change the power distribution to 1:3 or 3:1 by changing the line impedance. The impedance change of the line can be implemented by placing a floating copper plate on the bottom of the microstrip-line. When the floating copper plate and the ground plane are connected, the line operates as the microstrip-line, and when the floating copper plate and the ground plane are disconnected, the line operates as the coplanar-line. The proposed Gysel divider was fabricated at the center frequency of 1.5GHz. The fabricated 3:1 Gysel divider has a stable value S₁₁ of below -17dB, S₂₁/S₃₁ of 4.8±0.2dB, S₂₁(to high output port) of -1.39±0.12dB and S₃₁(to low output port) of -6.15±0.08dB over 1.3~1.7GHz.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.224-229
• /
• 2015

In this paper, we derived the design equation and implemented the unequal Gysel power divider that is one external resistors using the ABCD parameters analysis. Conventional unequal Gysel divider is difficult to obtain the characteristics of isolation and return loss at between output ports because it can't select a theoretical value of external resistor. To solve those problems, we design the new unequal Gysel power divider with transmission lines and one external resistor that has the characteristics of conventional unequal Gysel divider. To validate this design method, we simulated and measured an 4: 1 unequal Gysel power divider at the center frequency 1 GHz. The measured performances agreed well with the simulation results.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.33-38
• /
• 2013

In this paper, we present the design and measured performances of an dual-band Gysel power divider based on band-stop characteristic. After the Gysel divider is designed by lumped elements at single operating frequency, and then using filter conversion technique the lumped elements were changed a band-stop characteristic with dual-band characteristics. The features of this design method are that ${\lambda}/4$ transmission line by replacing lumped elements suppressed harmonic characteristics and also can reduce the size. To validate of the proposed power divider, the divider has been designed and measured at 880 MHz and 1650 MHz dual frequencies. The measured performances of the Gysel divider agree with prediction results at two frequencies.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.774-780
• /
• 2011

This paper presents a Bagley polygon and Gysel divider using open-stub loaded transmission line. The structure of slow-wave characteristic consists of small transmission line and shunt capacitive open stub that have reduced characteristic impedance and phase velocity, so we can implement the small circuit size. To validate the slow-wave characteristics, we are implemented the slow-wave characteristic of Bagley polygon and Gysel divider at center frequency 2.1 GHz. Its characteristics are same, but the circuit size is reduced above 15 % respectively.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.229-235
• /
• 2021

This paper proposes a method of implementing an unequal power divider for high splitting ratios by using transmission lines connected with open and short stubs. The proposed method is an equivalent circuit analysis of a transmission line with an additional port so that it can be converted to an arbitrary impedance in the center of a 2-port transmission line and a 3-port transmission line with an open or short stub connected in parallel to each port. To prove the validity of this method, a Wilkinson power divider with k² = 20 dB splitting ratio and a Gysel power divider with k² = 17 dB splitting ratio were designed at a center frequency of 1 GHz using a 3-port transmission line equivalent circuit. The experimental results of the electrical characteristics are in good agreement with the simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.837-843
• /
• 2008

This paper proposes a power divider based on meta-material structure with dual-band operation. The meta-material structures of left-hand characteristic are constituted of series capacitors and shunt inductors, but they have parasitic series inductance and shunt capacitance effects. There is represented the composite right/ left-handed transmission line (CRLH-TL) model. When the power divider is implemented by using the CRLH-TL, the power divider can operate dual band. To verify the power divider with dual band, we are implemented to operate dual-band that is 0.88 GHz and 1.67 GHz. The characteristics of divider have the return loss less than each 21.0 dB and 15.8 dB and the insertion loss better than 3.83 dB and 3.64 dB at each frequency. Also, the output phase difference is $3{\sim}6^{\circ}$.