• 대한기계학회논문집A
• /
• 제41권9호
• /
• pp.877-885
• /
• 2017

본 논문에서는 포신의 강선을 고려한 포 발사 해석기법을 다룬다. 포 발사 환경에서 탄두는 고충격 및 고회전의 동적 거동이 발생한다. 이러한 동적 거동에서 탄두 및 탄두 내 전자 장비가 손상되는 사례가 발생하고 있다. 따라서 포 발사 환경에서 탄두의 동적 거동 분석 및 생존성 평가를 위한 포 발사 해석기법의 개발이 필요한 실정이다. 본 논문에서는 앞서 선행연구자들의 단순화된 포 발사 해석기법을 개선하여, 포신의 강선과 탄대의 접촉에 따른 탄두의 회전을 구현할 수 있는 포 발사 해석기법을 개발하였다. 개발된 포 발사 해석기법은 실험결과와 비교를 통하여 검증하였으며, 제안된 해석기법을 이용하여 포 발사 시 탄두의 동적 거동 및 생존성을 평가하였다.

• 한국추진공학회지
• /
• 제19권4호
• /
• pp.52-60
• /
• 2015

최근 군 전력 개편에 따라 1개 군단이 담당해야할 작전 영역이 확대됨에 따라 155 mm 화포체계의 사거리 연장은 중요한 이슈가 되었다. 80 km 이상 155 mm 화포 체계의 사거리를 연장하기 위해 새로 운 시도가 필요하다. 램제트 기관은 공기흡입식 기관으로 고체 연료 로켓에 비해 몇 배 이상 높은 비추력을 제공할 수 있어 같은 연료 무게로 더 멀리 포탄을 투사하는 것을 가능하게 한다. 램제트 기관을 포로 발사할 경우 포구 초속이 약 Mach 3 이므로 추가적인 부스터가 필요치 않다. 특히 고체 연료 램제트 (Solid Fuel Ram Jet, SFRJ)는 어떠한 구동기관이 없어 발사 시 높은 충격을 받는 포탄에 적용하기에 적합하다. 본 연구에서는 155 mm 화포체계를 위한 포발사 램제트 추진탄을 설계하기 위해 비점성 유동을 가정하여 공기 흡입구, 연소실, 노즐을 설계하였다. 설계 변수를 변화시키며 80 km 이상 사거리를 가지며, 고폭탄 탑재 용적을 최대화 할 수 있도록 설계하였다.

• 한국추진공학회지
• /
• 제12권3호
• /
• pp.49-59
• /
• 2008

본 연구에서는 155 mm 고체연료 램제트 추진 탄의 설계방법을 제시하였고 수학적 모델링을 통한 비행성능 해석 프로그램을 개발하였다. 비행성능 해석을 통하여 추력, 비추력, 압력 회복률, 충격파의 위치, 항력의 크기 등 비행 중 램제트 성능을 예측하였다. 비행탄도 해석결과 RAP에 비하여 90 % 정도의 사거리 증대효과를 나타내었다. 또한 노즐 출구 면적비와 흡입구 면적의 변화에 따른 사거리 변화의 추이를 살펴보았다. 제시된 모델링과 시뮬레이션 방법은 램제트 탄의 개발에 필요한 설계 자료로 매우 유용할 것이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.386-393
• /
• 2005

The objective of the present study is to develop a new type of the Ballistic range, called 'two-stage light gas gun'. A computational work has been performed to investigate the aerodynamics of a projectile which is launched from the two-stage light gas gun. A moving coordinate method for a multi-domain technique is employed to simulate unsteady projectile flows with a moving boundary. The effect of a virtual mass is added to the axisymmetric unsteady Euler equation systems. The computed results reasonably capture the major flow characteristics which are generated in launching the projectile supersonically, such as the interaction between the shock wave and the blast wave, the interaction between the vortical flow and the barrel shock, and the steady under-expanded jet. The present computational results properly predict the velocity, acceleration, and drag histories of the projectile.

• 한국군사과학기술학회지
• /
• 제7권1호
• /
• pp.59-65
• /
• 2004

Survivability of the general purpose warhead during the target impact was studied. We first simulated the penetration phenomena and temporarily defined the survivability of the warhead at the impact situation. Next we launched the warhead projectiles by using Counter Mass Gun(CMG) system against the simulated specific steel target. The recovered warheads were carefully investigated and the penetration behaviors were analyzed. As a result the warhead can be hardened efficiently to enhance the survivability with the help of CMG test ＆ analysis.

• 한국안전학회지
• /
• 제12권2호
• /
• pp.27-36
• /
• 1997

This paper evaluates the static and fatigue bending strengths of CFRP (carbon fiber reinforced plastic) laminates subjected to hygrothermals. The specimens which had different stacking composition, orthotropic and quasi-isotropic laminated plates, were prepared for this experiment. A steel ball launched by the air gun collides against CFRP laminates to generate impact damages, and the 3-point fatigue bending test is carried out by using the impacted laminates to investigate the influence of hygrothermals on the effect on the residual bending fatigue strength of CFRP laminates.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.611-618
• /
• 2000

The test facility of the 1/60-scale models for the train-tunnel interactions was recently developed to investigate the effects of entry portal shapes, hood shapes and air-shafts for reducing the micro-pressure waves radiating to the surroundings of the tunnel exits by KRRI in Korea. The launching system of train model was chosen as air-gun type. In present test rig, after train model is launched, the blast wave by the driver did not enter to inside of the tunnel model. The train model is guided on the one-wire system from air-gun driver to the brake parts of test facility end. Some cases of the experiments were compared with numerical simulations to prove the test facility.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.146-154
• /
• 1999

The test facility of the 1/60-scale models for the train-tunnel interactions was recently developed to investigate the effects of entry portal shapes, flood shapes and air-shafts for reducing the micro-pressure waves radiating to the surroundings of the tunnel exits by KRRI in Korea. The launching system of train model was chosen as air-gun type. In present test rig, after train model is launched, the blast wave by the driver did not enter to inside of the tunnel model. The train model is guided on the one-wire system from air-gun driver to the brake parts of test facility end. Some cases of the experiments were compared with numerical simulations to prove the test facility.

• 한국군사과학기술학회지
• /
• 제18권6호
• /
• pp.728-735
• /
• 2015

A gas gun system to replicate the flight motions of large caliber spin-stabilized ammunition has been investigated experimentally and numerically. The system is specially designed to study aerodynamic characteristics and dynamics of a flight body ejected from a cargo shell or a subsonic projectile itself at up to 2,000 rpm and 100 m/s. Raynolds-averaged Navier-Stokes equations with a overset mesh technique and 6-DOF dynamics were solved to decide the chamber pressure according to the muzzle velocity input by users. The predicted velocity values show less than 6 % of discrepancies compared to experimental data. The system has successfully been tested for the simulation of deployment of a parafoil for a 155 mm gun-launched projectile.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.174-179
• /
• 2001

In order to investigate the fracture behaviors(perforation modes) and resistance to perforation during ballistic impact of aluminum alloy plate, ballistic tests were conducted. Depth of penetration experiments with 5.56mm-diameter ball projectile launched into 25mm-thickness Al 5052-H34 targets were conducted. A powder gun launched the 3.55g projectiles at striking velocities between 0.6 and 1.0 km/s. radiography of the damaged targets showed different penetration modes as striking velocities increased. Resistance to perforation is determined by the protection ballistic limit($V_{50}$), a statistical velocity with 50% probability for complete perforation. Fracture behaviors and ballistic tolerance, described by perforation modes, are respectfully observed at and above ballistic limit velocities, as a result of $V_{50}$ test and Projectile Through Plates (PTP) test methods. PTP tests were conducted with $0^{\circ}$ obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ tests with $0^{\circ}$ obliquity at room temperature were conducted with projectiles that were able to achieve near or complete perforation during PTP tests. The effect of various impact velocity are studied with depth of penetration.