• Journal of Pharmaceutical Investigation
• /
• v.29 no.4
• /
• pp.349-353
• /
• 1999

A novel polymeric tablet of tinidazole (TD) was formulated to treat Helicobacter pylori and Giardia lambria more efficiently with reduced hepatotoxicity by controlling the release of TD after oral administration. TD tablets containing various concentrations of either xanthan gum (XG, viscosity enhancer) and/or polycarbophil (PC, mucoadhesive) were prepared by the wet granulation method. In vitro release of TD into pH 2.0 and pH 5.0 buffer solutions was observed at 37°C by using an USP dissolution tester and an UV (313 nm) spectrophotometer. In vivo absorption of TD tablets was investigated in rabbits by measuring the blood concentration of TD after oral administration using a HPLC. Compared to a commercial TD tablet, in vitro release of TD in both pH 2.0 and pH 5.0 buffer solutions significantly decreased as the concentration: of XG or PC in the tablet increased up to 30%. However, when XG and PC was added in combination, TD was completely released in a pH 5.0 buffer solution within 8 hours, whereas the release of TD in pH 2.0 buffer solution significantly decreased. TD in a commercial tablet was rapidly absorbed after oral administration in rabbits. After oral administration of the polymeric tablets that contain both XG and PC, plasma concentration of TD dramatically decreased. Since the oral absorption of TD significantly decreased by the addition of XG and PC in the tablets while TD completely released in a pH 5.0 buffer solution, it was speculated that more TD was retained in the gastrointestinal tract. Thus, it was possible to control the release of TD by changing the content of XG and/or PC in the tablet, thereby manipulating the release rate and the gastrointestinal retention of TD after oral administration in rabbits.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.170-177
• /
• 2011

Transdermal drug delivery(TDS) offers many important advantages. For instance, it is easy and painless, it protects the active compound from gastric enzymes, and it avoids the hepatic first-pass effect. Also, it is simple to terminate the therapy if any adverse or undesired effect occurs. But skin is a natural barrier, and only a few drugs can penetrate the skin easily and in sufficient quantities to be effective. Therefore, in recent years, numerous studies have been conducted in the area of penetration enhancement. The most commonly used transdermal system is the skin patch using various types of technologies. Compared with other method of dosage, it is possible to use for a long term. It is also possible to stop the drug dosage are stopped if the drug dosage lead to side effect. Polysaccharide, such as xanthan gum and algin were selected as base materials of TDS. Also, these polymers were characterized in terms of enhancers and drug contents. Among these polysaccharide, the permeation rate of Paroxetine such as lipophilic drug was the fastest in xanthan gum matrix in vitro. We used glycerin, PEG400 and PEG800 as enhancers. Since dermis has more water content(hydration) than the stratum corneum, skin permeation rate at steady state was highly influenced when PEG400 was more effective for lipophilic drug. Proper selection of the polymeric materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate.

• Journal of Nutrition and Health
• /
• v.15 no.2
• /
• pp.83-90
• /
• 1982

This study was attempted to investigate the effects of adding gelatinized waxy rice flour, wheat flour, and Xanthan Gum to rice flour on the preparation and (quality) of dried noodles. 1) Rice flour demonstrated higher maximum viscosity value as determined by Amylograph than wheat flour. Among the composite flour mixture (Rice Flour 85+Gelatinized Waxy Rice Flour 15 + Xanthan Gum 2%) showed the highest viscosity value and (RF 35+ GWRF 15 + Wheat Flour 50) had the lowest. (RF 35 + GWRF 15 +WF 50) demonstrated gelatinization characteristics which is quite similar to that of wheat flour. 2) Forty and 50% replacement of rice flour and gelatinized waxy rice flour (15%) mixture by wheat flour improved significantly noodle making characteristics and cooking quality of noodles. 3) The addition of 2% XG to (RF 45 + GWRF 15 + WF 40) was effective on noodle making properties and on binding properties of cooked noodles. 4) The cooked noodle made of composite flour (RF 45 + GWRF 15 + WF 40 + XG 2%) received the highest total sensory evaluation score among the testing samples, and it was not significantly different from that of wheat flour.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.118-126
• /
• 2010

The fibrous material fraction as a by-product from the commercial aloe vera gel processing was obtained and freeze dried. The physicochemical characteristics such as the proximate composition, crystalline/surface structures and several physical functionalities including the water holding capacity (WHC), swelling capacity (SW), oil holding capacity (OHC), emulsion/foam properties and viscosity properties of this powdered sample (100 mesh) were investigated and analyzed by comparison with commercial $\alpha$-cellulose as a reference sample. The total dietary fiber content of powdered sample was very high as much as 87.5%, and the insoluble dietary and soluble dietary fiber content ratios were 77.6 and 22.4%, respectively. The FT-IR spectrum of powdered sample showed a typical polysaccharide property and exhibited a x-ray diffraction pattern for cellulose III and IV like structure. SW (8.24${\pm}$0.15 mL/g), WHC(6.40${\pm}$0.19 g water/g solid) and OHC(10.32${\pm}$0.29 g oil/g solid) of freeze dried aloe cellulose were about 3.3, 1.4 and 2 times higher than those of commercial $\alpha$-cellulose, respectively. Aloe cellulose (~2%, w/v) alone had no foam capacity while improved the foam stability of protein solution (1% albumin+0.5% $CaCl_{2}$) by factor of 300%. Emulsion capacity of 2%(w/v) aloe cellulose was about 70% level of 0.5%(w/v) xanthan gum, but its emulsion stability was about 1.2 times higher than that of xanthan gum. Also, aloe cellulose containing CMC (carboxyl methyl cellulose) of 0.3%(w/v) showed a very good dispersity. Aloe cellulose dispersion of above 1%(w/v) exhibited higher pseudoplasticity and concentration dependence than those of $\alpha$-cellulose dispersion, indicating the viscosity properties for new potential usage such as an excellent thickening agent.

• Microbiology and Biotechnology Letters
• /
• v.17 no.4
• /
• pp.397-402
• /
• 1989

A new extracellular biopolymer was produced by Methylobacterium organophilum from methanol as a sole carbon and energy source. The purified biopolymer was found to have a high molecular weight of about 4-5$\times$10$^6$ dalton and contained 66% (w/w) of carbohydrate but no polyhydro xybutyrate. Other organic constituents were consisted of protein, pyruvic acid, uronic acid, and acetic acid, whereas content of inorganic ash was 22%. Based on the chemical analysis of the biopolymer by TLC method, the polymer was consisted of glucose, galactose, and mannose with an approximate molar ratio of 2:3:2. The biopolymer solution showed a characteristics of pseudoplastic non-Newtonian fluid. The viscosity of the 1%-biopolymer solution was found to be 18,000 cp at a shear rate, 1 sec$^{-1}$, which was almost 10 times higher than that of a commercial xanthan gum.

• The Korean Journal of Food And Nutrition
• /
• v.37 no.2
• /
• pp.67-79
• /
• 2024

Yuzu (Citrus junos) undergoes traditional processing to create preserved yuzu with a sugar content of 50%. This study aimed to produce low-sugar yuzu syrup using artificial or natural sweeteners instead of sugar. Among artificial sweeteners, maltitol showed minimal browning and lack of deposition at high temperatures. The addition of xanthan gum (0.2%) and carboxymethyl cellulose (0.2%) resolved the issue of layer separation and viscosity decrease of yuzu syrup. Alternatively, grain syrup, a natural sweetener, improved viscosity and homogeneity without the additives. Yuzu syrups were developed using yuzu juice and preserved yuzu, with maltitol (20~40%) or grain syrup (50~70%) as the sweetener. Yuzu syrups containing 35% maltitol (M35) or 55% grain syrup (G55) had less than 5% and 10% free sugar, respectively. These syrups exhibited taste patterns similar to commercial yuzu syrup in analysis using an electronic tongue. Furthermore, M35 and G55 contained yuzu flavonoids at concentrations of 19.82 mg/g and 24.09 mg/g, respectively. Antioxidant activity (DPPH, ABTS radical scavenging) of M35 and G55 was equivalent to 10.55, 17.59 mg/100 g of Vitamin C and 97.39, 33.92 mg/100 g of Vitamin C, respectively. Consequently, M35 and G55 offer promising alternatives to preserved yuzu, providing low-sugar yuzu syrups enriched with functional ingredients.

• Food Science and Preservation
• /
• v.30 no.3
• /
• pp.405-418
• /
• 2023

The aim of this research was to study the feasibility of the defatted wheat germ flour (DWGF) alone or in combination with xanthan gum (XG) as egg yolk substitutes in mayonnaise formulation. In this research, DWGF was used at different levels (0, 25, 75 and 100%) alone or in combination with the XG (0.2%) as egg substitutes. The effects of these substitutions on the stability, textural and rheological characteristics of mayonnaise were investigated. According to the results, DWGF can be used as an egg yolk substitute in mayonnaise. Combining DWGF and XG as egg yolk substitute, improved the stability, textural and rheological properties. Mayonnaise with 100% egg yolk replacement showed the hardest structure, while the lowest firmness value was obtained in the control containing 100% egg yolk. Also, the highest adhesiveness value occurred in the sample with 100% DWGF. The thixotropic behavior was observed for all investigated mayonnaise samples over the all ranges of the studied shear rate (0.05-450/sec). Furthermore, the highest content of consistency coefficient value was observed in the sample with 100% DWGF and 0.2% XG. Therefore, it can be concluded that low-cholesterol mayonnaise with proper stability, textural and rheological characteristics are achievable by applying of the desirable combination of DWGF and XG.

• Journal of the Korean Dietetic Association
• /
• v.30 no.1
• /
• pp.11-28
• /
• 2024

This study aimed to establish the optimal amount of thickening agent for the appropriate viscosity in soups and beverages, which are part of the dysphagia diet. The soups were bean sprout soup and soybean paste soup; the beverages were orange juice, regular milk, and low-fat milk; the thickening agent was one type of xanthan gum product. After adding the thickening agents (from 1 g to 5 g per 200 mL of the test food), syringe tests were conducted over time (5, 10 and 15 minutes) to verify the effects of the amount of thickening agent added per sample and the time between addition and achieving the resulting viscosity, and to establish the optimal addition conditions to reach IDDSI levels 1, 2, and 3 of the dysphagia diet. Water (based on 200 mL) was used as the standard control. These results provide a useful basis for customized diets based on the patient's dysphagia severity. On the other hand, this study is limited by including only liquid foods in the dysphagia diet and one type of xanthan gum-based thickening agent. Therefore, it is necessary to conduct continuous research, based on the study results, to modify the viscosity of the dysphagia diet using various thickening agents and foods and prevent nutritional deficiencies by managing the diet according to the patient's swallowing ability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.5
• /
• pp.770-774
• /
• 2002

The effect of mixing ratio of materials and their retort processing conditions on the physical properties and preference of oyster porridge were investigated. Rice gave adequate viscosity (about 800 cp) to the porridge as it was used 10～12% level and half of it was ground. Potato starch, waxy corn starch, and Perfectamyl AC showed small variation in viscosity unrelated to the temperature, that was a good condition for high quality porridge. Especially, waxy corn starch had a good property for retort porridge because its viscosity was maintained high during the processing and decreased to preferable one after processing. Purity CSC, modified starch gave gum-like texture and didn't cause water-separation much after freezing and thawing treatment of the porridge. Therefore, it was good for enhancing the physical property of the porridge as a co-additive of waxy corn starch when it was used at quarter level of waxy corn starch. Xanthan gum increased dispersibility of materials and it was useful for stabilizing physical quality of the porridge without affecting preference when it was used below 0.2% concentration. As a result, the optimal material-mixing ratio was determined as rice 10% (50% of it was ground), waxy corn starch 1.5%, Purity CSC 0.5%, xmthan gum 0.2%, salt 0.3%, and water 87.5%. Oyster's porridge, retort processed with this recipe, showed stable physical property after 6 month storage at room temperature.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.217-225
• /
• 2004

This study was carried out to reduce the loss of frozen dough quality during frozen storage. Using response surface method, ascorbic acid 160.4 ppm, L-cysteine 63.1 ppm, and SSL 0.6% were found to be optimum, with xanthan gum 0.3% (formula A) and Ultra tex-3 5% (formula B) added as cryoprotectants. During frozen storage at $-20^{\circ}C$, control rapidly deteriorated after 4 weeks, while formulas A and B showed slight deterioration with immutable quality after 10 weeks.