Purpose: This article introduces a case study of using Taguchi Method to improve lecture satisfaction. Developed by Taguchi Genichi, this method has its strength in finding the control factor that is robust against noise factor. Finding the condition for such control factor has an effect of reducing the dispersion of the Lecture satisfaction. Methods: There are various factors in university classrooms. The factors which influenced the Lecture Satisfaction are analyzed by control factors and noise factors, control factors which is controllable are lecture completeness and thoroughly test the degree of supervision and noise factors which is not controllable is degree of physical and psychological Lecturer tired, then the experiment is conducted as guided by Taguchi's experimental design, one semester are experimented by eight professor with 2 classes, after discussion of the results the optimal lecture condition is suggested. Results: To improve Lecture Satisfaction under noise factor of physical and psychological Lecturer tired, optimal condition are that lecture completeness have scenario note during lecture and thoroughly test the degree of supervision have two proctors during test. Conclusion: In this paper, we have succession case by applying Taguchi methods in Lecture Satisfaction. We can apply to improve service by applying the Taguchi methods. In the future we hope to have many succession cases.
Electronic equipment mounted on military vehicles is exposed to external shocks and vibrations. This causes problems in tactical operation and also causes cost loss in equipment maintenance. Therefore, to optimize the test standards for military vehicles with vibration, dynamic characteristics should be analyzed and standardized through actual driving tests. In this paper, the internal structure of 2.5tons military vehicle is designed in the form of a drawer and lathe, and the dynamic characteristics are identified by experiment, and the design is proposed.
유도형 탄약은 비행속도 증가를 이용한 기존의 사거리 증가 방식과 다르게 정밀 유도제어를 사거리 연장 및 정밀 타격하는 기술을 기반으로 한다. 고회전으로 상승하는 탄은 탄도 정점에서 후미 날개를 전개하여 회전을 감소하고, 최종적으로 회전을 제거한 후 비행하게 된다. 주 날개 전개 전 탄체 뒤집힘 감지를 위하여 자세 추정이 요구되는데, 회전 감속 중에서는 일정한 회전을 가정한 기존의 유도무기 자세 추정 기법을 사용할 수 없다. 또한, 비행 시에는 횡축 가속도를 제어하기 때문에 중력 가속도 성분을 기반으로 하는 일반적인 무인기의 자세 추정 기법은 큰 오차를 발생한다. 이러한 문제를 해결하기 위해 본 논문에서는 저속 회전 및 비행 중 자세추정기법을 제시하고, 무인기에 탑재하여 비행 실험을 통해 검증하였다. 저속 회전 중 자세 추정 기법은 롤 각을 상태변수로 갖는 칼만 필터 형태로 구성하였다. 비행 시 자세 추정 기법은 사원수를 이용한 곱연산 확장형 칼만 필터를 기반으로 하며, 가속도 측정치가 중력 가속도뿐만 아니라 선회에 의한 구심력을 포함하도록 측정 모델을 개선하였다.
This study aims to reflect the basic principles and teaching-teaming principles of Realistic Mathematics Education in order to suppose an way in which mathematics as an activity is carried out in primary school. The development of what is known as RME started almost thirty years ago. It is founded by Freudenthal and his colleagues at the former IOWO. Freudenthal stressed the idea of matheamatics as a human activity. According to him, the key principles of RME are as follows: guided reinvention and progressive mathematisation, level theory, and didactical phenomenology. This means that children have guided opportunities to reinvent mathematics by doing it and so the focal point should not be on mathematics as a closed system but on the process of mathematisation. There are different levels in learning process. One should let children make the transition from one level to the next level in the progress of mathematisation in realistic contexts. Here, contexts means that domain of reality, which in some particular learning process is disclosed to the learner in order to be mathematised. And the word of 'realistic' is related not just with the real world, but is related to the emphasis that RME puts on offering the students problem situations which they can imagine. Under the background of these principles, RME supposes the following five instruction principles: phenomenological exploration, bridging by vertical instruments, pupils' own constructions and productions, interactivity, and interwining of learning strands. In order to reflect how to realize these principles in practice, the teaming process of algorithms is illustrated. In this process, children follow a learning route that takes its inspiration from the history of mathematics or from their own informal knowledge and strategies. Considering long division, the first levee is associated with real-life activities such as sharing sweets among children. Here, children use their own strategies to solve context problems. The second level is entered when the same sweet problems is presented and a model of the situation is created. Then it is focused on finding shortcomings. Finally, the schema of division becomes a subject of investigation. Comparing realistic mathematics education with constructivistic mathematics education, there interaction, reflective thinking, conflict situation are many similarities but there are alsodifferences. They share the characteristics such as mathematics as a human activity, active learner, etc. But in RME, it is focused on the delicate balance between the spontaneity of children and the authority of teachers, and the development of long-term loaming process which is structured but flexible. In this respect two forms of mathematics education are different. Here, we learn how to develop mathematics curriculum that respects the theory of children on reality and at the same time the theory of mathematics experts. In order to connect the informal mathematics of children and formal mathematics, we need more teachers as researchers and more researchers as observers who try to find the mathematical informal notions of children and anticipate routes of children's learning through thought-experiment continuously.
The ultimate objective of periodontal therapy is not only stopping the progression of periodontal disease, but also promoting the regeneration of lost periodontal tissue. Guided Tissue Regeneration, which is based on the principle that the goal of periodontal regeneration can be achieved by preventing apical migration of gingival epithelium and blocking cells originating from connective tissue, has been developed and used as a clinical procedure, and although it has shown excellent results in connective tissue healing, there have not been many studies showing its effect on the regeneration of alveolar bone loss due to periodontal disease. The objectives of this study are to investigate the result of 12 months-long treatment following guided tissue regeneration using expanded polytetrafluoroehylene membrane, and to observe the presence of regenerated alveolar bone. Forty-one teeth from 28 patients with clinical diagnosis of periodontitis has been selected. In fifteen of those interproximal intrabony defects, only flap operation had been carried out, and designated as the control group. Twenty-six intrabony defects received e-PTFE membrane following flap operation, and designated as the experimental group. Eleven teeth whose membrane had been exposed were excluded from the experiment. Various measurements including probing depth, loss of attachment, probing bone level and gingival recession have been recorded at 6th month and 12th month, and the significance of the changes has been analyzed. The results are as follows: 1. Probing depth at 6th and 12th month has shown a significant decrease in both groups (p<0.01), but significantly higher decrease was found in the experimental group compared to the control at the month(p<0.05). 2. Loss of attachment at 6th and 12th month has shown a significant decrease in both groups, but significantly higher decrease was found in the experimental group compared to the control (p<0.05). 3. Probing bone level at 6th and 12th month has shown a insignificant decrease in the control group and significant decrease in the experimental group (p<0.01). Significantly higher decrease in probing bone level was found in the experimental group (p<0.05). 4. Gingival recession at 6th and 12th month has shown a statistically significant increase (p<0.05), and the control group showed higher increase compared to the experimental group although no statistical significance was found. As these results have shown, the use of e-PTFE membrane in intrabony pockets results in marked decrease in the loss of attachment and probing bone level. This seems to indicate that e-PTFE membrane may play a role in alveolar bone regeneration in intrabony defects.
In this stuyd, the effect of the dominant follicle aspiration for the superovulatory response in HanWoo was investigated. The criterion for the presence or absence of a dominant follicle based on their morphological examination. The dominant follicle was aspirated 48hr before the onset of superovulation treatment by 6.5MHz convex probe connected with a carrier and superovulation induced by FSH (Super-Ov Tyrer, Texas, U.S.A) adminstered twic a day s.c. over 4 day in a decreasing regimen. From 13 HanWoo scanned daily to determine the presence and growth of the dominant follicle, its an average diameter of 15.4mm was measured and an average diameter of corpora lutea was 18.7mm on day of follicular aspiration. In the experiment, a follicular remove by ultrasound-guided aspiration, the ovarian response was significantly enhanced when animals were superovulated in the aspiation of a dominant follicle compare with animals superovulated non-aspiration of a dominat follicle. In the aspiration of a dominant follicle donors yieleded more corpora lutea(14.4$\pm$4.7 vs 8.6$\pm$3.4) and transferable embryos(8.9$\pm$4.2 vs 5.4$\pm$2.7) than control. In cows in which the dominant follicle had been aspirated under sonographical control 2 days before superovuation, the number of corpus lutea and transferable embryos were significantly enhanced compared with animals superovulated in the presence of a dominant follicle (14.4$\pm$4.7 vs 6.9$\pm$2.7, ; 8.9$\pm$4.2 vs 3.3$\pm$1.6). After 7 days of artificial insemination, the embryos at 7 days were cllected by uterine flushing after dominant follicle insemination, the embryos at 7 days were collected by uterine flushing after dominant follicle aspiration and superovulation treatment, and evaluated their quality by morphological criteria. Sixteen embryos with excellent and good grade were transferred into 8 recipient cows. Six pregnancies were identified at 60 and 120 days of gestation by rectal palpations. In conclusion, the present study showed that 1) the presence or absence of a dominant follicle signficicnatly affects superovulatory responses, and 2) ultrasound-guided follicular aspiration of the dominant follicle and superovuation treatment provides an accurate and procedure to increase ovarian responses in HanWoo.
본 연구는 공간 해상력과 대조도가 우수한 kV X선 기반 OBI (On-Board Imager)와 CBCT (Cone-Beam CT)를 이용한 치료 부위별 추가 선량을 측정하고 영상유도방사선치료의 방사선 관리 측면의 적절성과 안정성을 평가하고자 한다. 실험 대상은 선형가속장치(Clinac IX)에 부착된 OBI와 CBCT, 링 모양의 Halcyon CBCT를 치료 부위별 방사선 촬영 조건으로 조사하여 동중심의 선량을 이온 챔버로 측정하였다. OBI의 1회 분할 피폭선량은 머리 부위 0.77 mGy, 흉부 3.04 mGy, 골반 부위 7.19 mGy로 계측되었다. Clinac IX CBCT와 Halcyon CBCT 두 장비의 피폭선량은 골반 부위에서는 두 장치의 피폭선량이 70.04 mGy, 70.45 mGy로 비슷하게 계측되었다. 흉부 CBCT에서는 Clinac IX 흡수선량(70.05 mGy)이 Halcyon 흡수선량(21.01 mGy)보다 높게 나타났다. 머리 부위에서도 Clinac IX 흡수선량(9.08 mGy) Halcyon의 흡수선량(5.44 mGy)보다 높게 나타났다. kV X선 기반 영상유도방사선치료는 광전흡수에 의한 추가 피폭선량이 치료 부위 전체 체적에 영향을 줄 수 있으며 주의가 필요하다.
목 적 : 최근 영상유도 방사선치료의 급증에 따라 영상유도장치의 정도관리를 철저히 시행할 필요가 있다. 특히 영상유도 방사선치료는 장치의 정확성을 기본 전제로 하기 때문에 이에 대한 정도관리가 필수적으로 행해져야 한다. 본원에서는 영상유도장치의 정도관리를 기존의 팬텀(Phantom)보다 효율적인 팬텀을 자체 제작하여 정확하고 효율적인 정도관리를 이행하고자 한다. 대상 및 방법 : 영상유도장치의 정도관리 항목으로 매우 중요한 5가지를 설정하고, 그 항목에 대하여 효율적이고 정확한 정도관리가 이루어 질 수 있는 팬텀(AMC G-Box)을 자체 제작하였다. 정도관리 항목은 Iso-center와 영상유도장치의 중심 일치성, 구현된 영상의 실측 정확성, 4 방향의 중심일치성, 영상유도 이동의 정확성 및 CBCT(Cone Beam CT)에서 구현된 HU(Hounsfield Unit)의 재현성으로 설정하였다. 이 항목에 대하여 $10cm{\time}10cm{\time}10cm$의 정사각형 팬텀을 1 cm두께의 아크릴로 제작하였으며 CBCT HU을 측정하기 위해 팬텀안에 각각 밀도가 다른 3개의 물질을 삽입하였다. 팬텀에는 중심과 일정한 위치를 가리키는 표식을 만들어서 중심과 일치성 검사를 할 수 있도록 하였다. 실험은 기존 각각의 팬텀을 이용한 정도관리를 실시하고, 새로 제작된 AMC G-Box로 실시한 후 그 결과 값을 비교하고 소요되는 시간과 문제점을 분석하였다. 사용된 치료기는 Varian사의 4개의 모델이고, 1주 간격으로 2회 측정하였다. 결 과 : 완성된 AMC G-Box를 이용한 영상유도장치의 정도관리를 시행하였을 때, 기존 개별로 구성된 팬텀을 이용한 정도관리 결과를 보았을 때, $0.2mm{\pm}0.1$이내에서 결과 값이 같았다. 또한 기존의 방법일 경우 최소 30분에서 45분이 소요되었으나, AMC G-Box를 이용하였을 때는 15분~20분이 소요되어 50%이상 시간을 감소하였다. 결 론 : 영상유도장치는 사용기간이 지남에 따라 일치성과 정확성이 떨어지는 경향이 있다. 따라서 관련된 정도관리를 주기적으로 철저하게 할 필요성이 있다. 특히 일치성 검사는 매일 점검해야하는 항목이다. 이러한 정도관리를 AMC G-Box를 이용할 경우 정확한 정도관리를 효율적으로 실시함으로써, 장치와 환자 치료의 안정성과 정확성을 높일 수 있었다.
The large volume multi-tasking vertical lathe was developed for machining the bearing parts for a wind power generator. Although the machined part is large in size high precision tolerances are required recently. One of the most important components to achieve this mission is the rotating table which holds and supports the part to be machined. The oil hydrostatic bearing is adopted for the thrust bearing and the rolling bearing for the radial bearing. In this article experimental performance evaluation and its analysis results are presented. The rotational accuracy of the table is assessed and the frequency domain analysis for the structural loop is performed. And in order to evaluate the structural characteristic of table the moment load experiment is performed. The rotational error motion is measured as below 10 ${\mu}m$ for the radial and axial direction and 22,800 Nm/arcsec of moment stiffness is achieved for the rotary table.
이전 연구에서 우리는 실외에서 특정 목적지까지 안전하게 보행할 수 있도록 하는 시각장애인을 위한 보행지원 시스템을 개발하였다. 보행지원 시스템은 시각장애인을 대상으로 실외에서 실험을 수행하므로 여러 가지 위험 상황에 실험대상자가 노출될 수 있다. 본 논문에서는 이러한 문제를 해결하기 위해 보행지원 시스템을 착용한 실험대상자를 모니터링 하고 위험 상황을 실험대상자에게 원격으로 경고하는 대화식 어플리케이션을 제안한다. 이 어플리케이션은 일반적인 랩탑 컴퓨터에 내장되어있는 블루투스(bluetooth) 모듈과 보행지원 시스템과의 연결을 통해 추가적인 장치 없이 무선으로 시스템과 원격 통신이 가능하다. 따라서 시스템을 착용한 사용자의 위치와 시스템이 사용자에게 안내하는 내용을 실시간으로 원격 모니터링 할 수 있고 목적지까지의 보행 경로나 주변 POI(Point of Interest) 좌표 등을 화면으로 확인할 수 있다. 제안한 모니터링 어플리케이션을 사용함으로써 신속한 위험 상황 감지와 빠른 상황 대처를 할 수 있으므로 안전한 실험이 가능하다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.