• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.3
• /
• pp.229-236
• /
• 2014

In this paper, the guidance laws and controllers for the gliding guided artillery munition is studied. The gliding guided artillery munition has wings for gliding to increase a range; therefore previous guidance laws and controllers for the guided munition could not be applied. Concepts of vector field guidance and proportional navigation guidance are applied for mid-term and terminal guidance, respectively. The gliding guided artillery munition is operated within wide altitude and speed areas; therefore, the controllers are designed for each area, and gain-scheduling and the linear interpolation technique is applied to compute the appropriate gains.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.70-77
• /
• 2014

In this paper, the development of unique model of the 2.75 inch rocket propulsion system is described. Recently developed korean 2.75 inch rocket propulsion system shows the improvement of a flame stability resulted from a change in the configuration of propellant grain, and of an incidental ignition protection function using the EMI(electromagnetic interference) filter on ignition system. Moreover it is shown that a directional flight stability is improved by increasing the number of fins and changing the nozzle configuration. Static firing test and thermal shock test were conducted for the validation before flight, and flight test of 210 rounds of rockets was conducted to verify the trajectory uniformity. In addition, intellectual property issues can be overcome with the unique korean 2.75 inch rocket motor as well as the performance improvement.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.3
• /
• pp.221-228
• /
• 2014

In this paper, the operational concept and the navigation algorithms for the gliding guided artillery munition are studied. The gliding guided artillery munition has wings for gliding; therefore spin of the munition should be eliminated. The previous navigation algorithms assumed a spinning munition with constant angular velocity; hence, they cannot be applied for the gliding munition. Moreover, lateral stability becomes worse due to decrease of angular momentum. Therefore, side force should be controlled to improve the stability, and the munition should maneuver, then the previous navigation algorithms for typical fixed-wing aircraft cannot be applied. In this paper, we apply the previous navigation algorithms for the spinning munition. Spin is eliminated and wings are deployed based on the estimation results, and the advanced navigation algorithm for the non-spinning munition is introduced.

• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.1-9
• /
• 2024

In this study, we researched control compensation techniques to enhance control robustness against external forces and responsiveness to output dead zones in direct-actuated voice coil actuators for small guided missiles. An aircraft's wings must optimally control the command angle while managing various nonlinear external forces such as drag, lift, and thrust during flight. The small direct -drive voice coil actuator, when applied, benefits from small current requirements in no-load situations but suffers from diminished control robustness due to rapid increases in control current during external force applications. To address this issue, we designed and implemented a system that compensates for errors by accumulating additional output, thus improving the actuator's responsiveness in control scenarios with external forces. This was verified through experimental results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.11
• /
• pp.965-972
• /
• 2016

This paper presents results of flight experiments on a navigation algorithm including multiplicative extended Kalman filter for estimating attitude of the guided munition. The filter describes orientation of aircraft by data fusion with low-cost sensors where measurement update is done by multiplication, rather than addition, which is suitable for quaternion representation. In determining attitude from vector observations, the existing approach utilizes a 3-axis accelerometer as a 2-axis inclinometer by measuring gravity to estimate pitch and roll angles, while GNSS velocity is used to derive heading of the vehicle. However, during accelerated maneuvers such as coordinated flight, the accelerometer provides inadequate inclinometer measurements. In this paper, the measurement update process is newly defined to complement the vulnerability by using different vector observations. The acceleration measurement is considered as a result of a centrifugal force and gravity during turning maneuvers and used to estimate roll angle. The effectiveness of the proposed method is verified through flight experiments.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.647-650
• /
• 2017

As the necessity of development of supersonic vehicle increases, securing an aerodynamic data from low to high altitude is requested for flying vehicles crusing in various high-tech environment. Therefore our research team built equipment by improving heating device of Model Aerodynamic Facility(MAF) of Konkuk University to simualte a real gas environment. Guided weapon system and temperature and velocity distribution according to the flow that is produced from the pier of supersonic vehicle is planned to be researched by using this equipment.

• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.253-269
• /
• 2012

A split spectrum processing (SSP) method is proposed to accurately determine the time-of-flight (ToF) of damage-scattered waves by comparing the instantaneous amplitude variation degree (IAVD) of a wave signal captured from a damage case with that from the benchmark. The fundamental symmetrical ($S_0$) mode in aluminum plates without and with a notch is assessed. The efficiency of the proposed SSP method and Hilbert transform in determining the ToF of damage-scattered $S_0$ mode is evaluated for damage identification when the wave signals are severely contaminated by noise. Broadband noise can overwhelm damage-scattered wave signals in the time domain, and the Hilbert transform is only competent for determining the ToF of damage-scattered $S_0$ mode in a noise-free condition. However, the calibrated IAVD of the captured wave signal is minimally affected by noise, and the proposed SSP method is capable of determining the ToF of damage-scattered $S_0$ mode accurately even though the captured wave signal is severely contaminated by broadband noise, leading to the successful identification of damage (within an error on the order of the damage size) using a triangulation algorithm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.311-320
• /
• 2008

A LIDAR can rapidly generate 3D points by densely sampling the surfaces of targets using laser pulses, which has been efficiently utilized to reconstruct 3D models of the targets automatically. Due to this advantage, LIDARs are increasingly applied to the fields of Defense and Security, for examples, being employed to intelligently guided missiles and manned/unmanned reconnaissance planes. For the prior verification of the LIDAR applicability, this study aims at generating simulated LIDAR data. Here, we derived the sensor equation by modelling the geometric relationships between the LIDAR sub-modules, such as GPS, IMU, LS and the systematic errors associated with them. Based on this equation, we developed a program to generate simulated data with the system parameters, the systematic errors, the flight trajectories and attitudes, and the reference terrain model given. This program had been applied to generating simulated LIDAR data for urban areas. By analyzing these simulated data, we verified the accuracy and usefulness of the simulation. The simulator developed in this study will provide economically various test data required for the development of application algorithms and contribute to the optimal establishment of the flight and system parameters.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.600-609
• /
• 2017

We designed a target management integration system that enables us to select the final target manually or automatically from seeker's sensor image. The integrated system was developed separately for the air vehicle system and the ground system. The air vehicle system simulates the motion dynamics and the sensor image of the air vehicle, and the ground system is composed of the target template image module and the ground control center module. The flight maneuver of the air vehicle is based on pseudo 6-degree of freedom motion equation and the proportional navigation guidance. The sensor image module was developed using the known infrared(IR) image rendering method, and was verified by comparing the rendered image to that of a commercial software. The ground control center module includes an user interface that can display as much information to meet user needs. Finally, we verified the integrated system with simulated impact target mission of the air vehicle, by confirming the final target change and the shot down result of the user's intervention.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.47-53
• /
• 2022

With the recent development of defense technology, various aircraft armaments/equipments are being developed. Among them, cruise guided weapons(missile) for launching aircraft can be installed on aircraft aftersecuring reliability and safety through varioustests. In order to avoid collision with aircraft, missile separated from aircraft must release restraint of wing at the specified time, control wing in the specified direction. In order to confirm this, a test system that can control MIL-STD-1760 according to safety separation procedure and verify release performance is required. test system needs a function to check circuit for release of restraints and a function to check driving performance by controlling MIL-STD-1760. In addition, test system should be simulate environment separated from aircraft. This paper presented a testsystemthat can verify circuit and driving performance mounted on missile according to the safety separation procedure, and it was confirmed that it was normally separated from aircraft through flight tests.