• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.93-100
• /
• 2005

The top and bottom nozzles of PWR fuel assembly are connected by guide thimbles and an instrumentation tube that are connected with spacer grids. The fuel rods are inserted into the each cell of spacer grids. The loads acting on the fuel assembly are transmitted to the guide thimbles through the flow plate of top nozzle The axial loads applied to the fuel assembly are not equally distributed among the guide thimble due to the geometry of the top nozzle flow plate and spacer grid. In this study, the load concentration factors for the $17\times17$ fuel assembly were calculated. The analytical model fur the calculation of the load concentration factor of top nozzle flow plate was developed using ANSYS 5.6. The finite element analyses were performed using the model composed of top nozzle, guide thimble, and spacer grid. And, the analysis results were compared with the test results.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 추계학술발표회요약집
• /
• pp.155.2-155
• /
• 1999

• 한국정밀공학회지
• /
• 제4권4호
• /
• pp.72-83
• /
• 1987

In axisymmetric tube reducing process for thin sheet metal tubes, the reduction ration of diameter is an important factor in the process design. For very thin sheet metal tubes, tube reducing cannot be successfully employed due to wrinkling of the edge portion of a tube as well as due to buckling of its rest portion. In the present study, thin sheet metal tubes are subjected to internal pressure during the tube reducing process in order to increase the forming limits. Analysis is made for the sound flow deformation in nonsteady tube reducing considering the normal anisotropy. Experiments are carried out for brass tubes. The present study is shown to give an effective guide line in designing the tube reducing process for very thin-walled sheet metal tubes. Hpwever, it is suggested that an analysis for instability should be made to design the process more effectively.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제17권4호
• /
• pp.307-312
• /
• 2017

Background: The aim of this study was to estimate the optimal depth of nasotracheal tube placement. Methods: We enrolled 110 patients scheduled to undergo oral and maxillofacial surgery, requiring nasotracheal intubation. After intubation, the depth of tube insertion was measured. The neck circumference and distances from nares to tragus, tragus to angle of the mandible, and angle of the mandible to sternal notch were measured. To estimate optimal tube depth, correlation and regression analyses were performed using clinical and anthropometric parameters. Results: The mean tube depth was $28.9{\pm}1.3cm$ in men (n = 62), and $26.6{\pm}1.5cm$ in women (n = 48). Tube depth significantly correlated with height (r = 0.735, P < 0.001). Distances from nares to tragus, tragus to angle of the mandible, and angle of the mandible to sternal notch correlated with depth of the endotracheal tube (r = 0.363, r = 0.362, and r = 0.546, P < 0.05). The tube depth also correlated with the sum of these distances (r = 0.646, P < 0.001). We devised the following formula for estimating tube depth: $19.856+0.267{\times}sum$ of the three distances ($R^2=0.432$, P < 0.001). Conclusions: The optimal tube depth for nasotracheally intubated adult patients correlated with height and sum of the distances from nares to tragus, tragus to angle of the mandible, and angle of the mandible to sternal notch. The proposed equation would be a useful guide to determine optimal nasotracheal tube placement.

• 대한기계학회논문집A
• /
• 제38권3호
• /
• pp.235-241
• /
• 2014

심해 군사 작전에서 유도체의 타격 성능 향상은 모함과 유도체가 광 케이블을 통하여 안정적인 통신을 유지함으로써 가능하다. 이 때 광 케이블은 엉킴 및 절단과 같은 풀림 불량을 방지하기 위해 보호 튜브에 의해 보호된다. 또한 보호 튜브는 전단 핀에 의해 유도체와 연결되며, 전단 핀의 파손에 의해 유도체는 보호 튜브와 분리된다. 따라서 본 연구에서는 유도체 및 보호 튜브를 모델링하고, 유도체의 운동에 따른 보호 튜브의 풀림 거동을 분석하며 전단 핀에 작용하는 동적 하중을 예측한다. 유도체와 보호 튜브는 질점으로 구성하며, 일정 길이 구속으로 연결한다. 전단 핀에 작용하는 하중은 실험 결과와 비교 검증하며, 이를 바탕으로 보호 튜브의 거동을 예측한다.

• 한국지열·수열에너지학회논문집
• /
• 제12권3호
• /
• pp.9-16
• /
• 2016

This study had the purpose on feasibility judgment through performance forecast of wind power generation system using the cross flow vertical type wind power turbine for the situation of domestic small size wind power technology development. Wind power generation system uses the principle of venturi tube that gathers the wind through the first guide vane, and second guide vein changes the angle of the wind simultaneously by playing the role of venturi tube. After this, wind got out from the second guide vane spins the wind power turbine and has the meaning of judging on the aspect of numerical interpretation the feasibility for the small size wind power generation through wind power generation system that comes out from the back.

• 한국전산유체공학회지
• /
• 제15권1호
• /
• pp.17-23
• /
• 2010

Performance improvements of the heat recovery steam generator(HRSG) can be achieved by improving the flow distribution of exhaust gases for a various type of different equipments. A number of design parameters are systematically investigated and their effects on an index of velocity deviation established. The parameters include the three shape of the transition duct and the wide range of the guide vane angles. The numerical results clearly reveal feature of the flow pattern in the transition duct, velocity deviation and pressure drop at tube bank part.

• 한국유체기계학회 논문집
• /
• 제14권2호
• /
• pp.25-28
• /
• 2011

The control rod assemblies do freely fall into the reactor core by the gravity from the control rod drive mechanism. In order to achieve a rapid shutdown and control the reactor power, it is required to insert control rod assemblies as soon as possible. In this paper, we evaluated the drop time and flow characteristics caused around guide tube for SMART(System-integrated modular advanced reactor) control rod assembly. Numerical analyses are carried out with FLUENT program of computational fluid dynamics. This study results show that the drop time of the control rod assembly in the operating condition of SMART is more 20 percent rapidly than the drop time of the room temperature and ambient atmosphere condition.

• 대한치과마취과학회지
• /
• 제13권4호
• /
• pp.189-193
• /
• 2013

We experienced dfficult airway management in a patient who had Ludwig angina with morbid obesity, dfficulty with mouth opening and neck extension. We planned to perform awake-nasotracheal intubation with fiberoptic bronchoscopy but the patient's condition was not suitable to do this procedure. Thus, we tried fiberoptic nasotracheal intubation under general anesthesia but we experienced difficult airway management due to epistaxis. We tried to use video laryngoscope instead of fiberpotic bronchoscopy but also failed to guide the tube into trachea due to limited mouth opening. We used video laryngoscope to make a view of vocal cord and used fiberoptic bronchoscope as an intubation guide of endotrachedal tube and successfully intubated the patient.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.1345-1346
• /
• 2005