• Journal of Mushroom
• /
• v.16 no.2
• /
• pp.90-95
• /
• 2018

This study was carried out to investigate the optimum temperature and the cultivation period according to the different growth stages of Gastrodia elata (G. elata). The growth period for the indoor cultivation of G. elata is divided into four stages that require specific temperatures during the enlargement of the tuber. The optimum temperatures and cultivation periods during the growth stages of G. elata were observed to be $20^{\circ}C$ for 30 days during the mycelial growth stage (MGS), $25^{\circ}C$ for 120 days during the tuber formation stage (TFS), $6-24^{\circ}C$ for 60 days during the tuber enlargement stage (TES), and $5^{\circ}C$ for 30 days during the dormant stage (DS). The total cultivation period was shortened by 120 days in the indoor cultivation facilities by reduction of 30 days from the mycelial growth stage, addition of 30 days to the tuber formation stage, and reduction of 120 days from the dormancy stage as compared to the outdoor field cultivation. These results provide a basis for a growth model that permits year-round cultivation of G. elata.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.233-239
• /
• 2004

The effect of annealing temperature on microstructures and mechanical properties of the sheets received $88\%$ reduction at cryogenic temperature was investigated for the annealing temperature of $150\~300^{\circ}C$, in comparison with those at room temperature. The presence of equiaxed grains, whose size is about 200nm in a diameter, was observed in 5052 Al alloy deformed $88\%$ and annealed $200^{\circ}C$ for an hour. When compared with the deformation at room temperature, the deformation at cryogenic temperature showed the higher strengths and equivalent elongation after annealing at the annealing temperature below $200^{\circ}C$. However, for annealing above $250^{\circ}C$ materials deformed at cryogenic temperature showed the lower strength than those deformed at room temperature. This behavior might be attributed to the higher rate of recrystallization and growth in materials deformed at cryogenic temperature during annealing, due to the lager density of dislocations accumulated during the deformation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.4
• /
• pp.580-597
• /
• 2013

Three materials SUS304, 9% Ni steel and Al 5083-O alloy, which are considered possible candidate for International Maritime Organization (IMO) type B Cargo Containment System, were studied. Monotonic tensile, fatigue, fatigue crack growth rate and Crack Tip Opening Displacement tests were carried out at room, intermediate low ($-100^{\circ}C$) and cryogenic ($-163^{\circ}C$) temperatures. The initial yield and tensile strengths of all materials tended to increase with decreasing temperature, whereas the change in elastic modulus was not as remarkable. The largest and smallest improvement ratio of the initial yield strengths due to a temperature reduction were observed in the SUS304 and Al 5083-O alloy, respectively. The fatigue strengths of the three materials increased with decreasing temperature. The largest increase in fatigue strength was observed in the Al 5083-O alloy, whereas the 9% Ni steel sample showed the smallest increase. In the fatigue crack growth rate test, SUS304 and Al 5083-O alloy showed a decrease in the crack propagation rate, due to decrease in temperature, but no visible improvement in da/dN was observed in the case of 9% Ni steel. In the Crack Tip Opening Displacement (CTOD) test, CTOD values were converted to critical crack length for the comparison with different thickness specimens. The critical crack length tended to decrease in the case of SUS304 and increase for the Al 5083-O alloy with decreasing temperature. In case of 9% Ni steel, change of critical crack length was not observed due to temperature decrease. In addition, the changing material properties according to the temperature of the LNG tank were analyzed according to the international code for the construction and equipment of ships carrying liquefied gases in bulk (IGC code) and the rules of classifications.

• Journal of Korea Foundry Society
• /
• v.3 no.1
• /
• pp.3-12
• /
• 1983

The influence of columnar dendirtes on the mechanical properties of Al-1% Cu alloys as unifirectionalloy solidified under the conditions of controlled crystal growth rate (R) and temperature gradient (G) was investigated. And the change of metallography and mechanical properties when unifirectionalloy solidified alloys and cast alloys were cold-rolled from 10% to 90% in reduction ratio was studied. The results are as follows: 1. The elongation and yield strength of unifirectionalloy solidified alloy are higher then those of cast alloy, but there is a little decrease in ultimate tensile strength. 2. The metallography and mechanical properties are changeable with the primary arm spacings when the unidirectionalloy solidified alloys were cold-rolled from 10% to 90% in reduction ratio. An alloy with larger primary arm spacings was easily changeable in metallography and mechanical properties when it was cold-rolled. 3. The tensile strength of transversely cold-rolled to 90% in reduction ratio was higher then that of longitudionalloy cold-rolled to 90% in reduction ratio. In the case, the fractorgraphs of fractured surface showed that the cast alloy and the unifirectionalloy solidified alloy was ductile-fractured, but the surface of transversely cold-rolled to 90% reduction of unidirection alloy solidified was slip plane qracture.

• ALGAE
• /
• v.29 no.3
• /
• pp.203-215
• /
• 2014

As global warming continues over the coming century, marine organisms will experience a warmer, more acidic ocean. Although these stressors may behave antagonistically or synergistically and will impact organisms both directly (i.e., physiologically) and indirectly (i.e., through altered species interactions), few studies have examined the complexities of these effects in combination. To address these uncertainties, we examined the independent and combined effects of elevated temperature and $pCO_2$ on the physiology of the adult sporophyte stage of giant kelp, Macrocystis pyrifera, and the grazing of the purple sea urchin Strongylocentrotus purpuratus. While elevating $pCO_2$ alone had no effect on M. pyrifera growth or photosynthetic carbon uptake, elevating temperature alone resulted in a significant reduction in both. However, when M. pyrifera was grown under elevated temperature and $pCO_2$ together, growth and photosynthetic carbon uptake significantly increased relative to ambient conditions, suggesting an interaction of these factors on photosynthetic physiology. S. purpuratus held under future conditions generally exhibited reduced growth, and smaller gonads than urchins held under present-day conditions. However, urchins fed kelp grown under future conditions showed higher growth rates, partially ameliorating this effect. Feeding rates were variable over the course of the experiment, with only the first feeding rate experiment showing significantly lower rates for urchins held under future conditions. Together, these data suggest that M. pyrifera may benefit physiologically from a warmer, more acidic (i.e., higher $pCO_2$) ocean while S. purpuratus will likely be impacted negatively. Given that kelp-urchin interactions can be important to kelp forest structure, changes to either of these populations may have serious consequences for many coastal environments.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.2
• /
• pp.195-200
• /
• 1988

This experiment was carried out to evaluate the flooding injury and yield compensating ability by uppernode tillers formed during the recovery periods. Rice plants grown in experimental field transplanted on 1st, June were completely flooded for 3 days by the artificial flooding device in each different growth stage such as middle tillering stage (20 days after transplanting), young panicle formation stage, meiotic stage and heading stage. And the farmer's rice fields which had various transplanting dates were completely flooded for 3 days by typhoon 'Thelma' from 16th to 18th, July, 1987. Percent of dead leaves and yield reduction of rice in experimental field flooded at the different growth stages were resulted that the earlier growth stages were the lower damage because of the low temperature in the earlier growth stage, but it showed opposite tendency in farmer's rice field flooded in high temperature season by typhoon 'Thelma'. Rice yield compensating ability attained to 66% of check plot yield was greatly depend on uppernode panicles induced after damage of original young panicles. Uppernode panicle produced 236 kg per 10a in polished rice by securing 690$^{\circ}C$ of accumulated mean temperature and 210 hours of sunshine during the ripening periods when headed up to 15th of September.

• Food Science and Biotechnology
• /
• v.27 no.6
• /
• pp.1865-1869
• /
• 2018

This study examined the effects of alfalfa seed germination on growth of Salmonella enterica. We investigated the population changes of S. enterica during early sprout development. We found that the population density of S. enterica, which was inoculated on alfalfa seeds was increased during sprout development under all experimental temperatures, whereas a significant reduction was observed when S. enterica was inoculated on fully germinated sprouts. To establish a model for predicting S. enterica growth during alfalfa sprout development, the kinetic growth data under isothermal conditions were collected and evaluated based on Baranyi model as a primary model for growth data. To elucidate the influence of temperature on S. enterica growth rates, three secondary models were compared and found that the Arrhenius-type model was more suitable than others. We believe that our model can be utilized to predict S. enterica behavior in alfalfa sprout and to conduct microbial risk assessments.

• Mycobiology
• /
• v.45 no.4
• /
• pp.240-254
• /
• 2017

Cereal grains are the most important food source for humans. As the global population continues to grow exponentially, the need for the enhanced yield and minimal loss of agricultural crops, mainly cereal grains, is increasing. In general, harvested grains are stored for specific time periods to guarantee their continuous supply throughout the year. During storage, economic losses due to reduction in quality and quantity of grains can become very significant. Grain loss is usually the result of its deterioration due to fungal contamination that can occur from preharvest to postharvest stages. The deleterious fungi can be classified based on predominance at different stages of crop growth and harvest that are affected by environmental factors such as water activity ($a_w$) and eco-physiological requirements. These fungi include species such as those belonging to the genera Aspergillus and Penicillium that can produce mycotoxins harmful to animals and humans. The grain type and condition, environment, and biological factors can also influence the occurrence and predominance of mycotoxigenic fungi in stored grains. The main environmental factors influencing grain fungi and mycotoxins are temperature and $a_w$. This review discusses the effects of temperature and $a_w$ on fungal growth and mycotoxin production in stored grains. The focus is on the occurrence and optimum and minimum growth requirements for grain fungi and mycotoxin production. The environmental influence on aflatoxin production and hypothesized mechanisms of its molecular suppression in response to environmental changes are also discussed. In addition, the use of controlled or modified atmosphere as an environmentally safe alternative to harmful agricultural chemicals is discussed and recommended future research issues are highlighted.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.143-150
• /
• 2013

Recently, environmental issues such as climate warming, ozone layer depletion, reduction of tropical forests and desertification are emerging as global environmental problems beyond national problems. And international attention and effort have been carried out in many ways to solve these problems. In this study, the growth of green was calculated quantitatively using the technique of remote sensing and temperature change was figured out through temperature extraction in the city. The land-cover changes and thermal changes for research areas were analyzed using Landsat TM images on May 2002 and May 2009. Surface temperature distribution was calculated using spectral degree of brightness of Band 6 that was Landsat TM thermal infrared sensor to extract the ground surface temperature in the city. As a result of research, the area of urban green belt was increased by $2.87km^2$ and the ground surface temperature decreased by $0.6^{\circ}C{\sim}0.8^{\circ}C$ before and after tree planting projects. Henceforth, if the additional study about temperature of downtown is performed based on remote sensing and measurement data, it will contribute to solve the problems about the urban environment.

• ALGAE
• /
• v.31 no.1
• /
• pp.49-59
• /
• 2016

Ulva pertusa, a common bloom-forming green alga, was used as a model system to examine the effects of elevated carbon dioxide (CO₂) and temperature on growth and photosynthetic performance. To do this, U. pertusa was grown under four temperature and CO₂ conditions; ambient CO₂ (400 μatm) and temperature (16℃) (i.e., present), elevated temperature only (19℃) (ET; i.e., warming), elevated CO₂ only (1,000 μatm) (EC; i.e., acidification), and elevated temperature and CO₂ (ET and EC; i.e., greenhouse), and its steady state photosynthetic performance evaluated. Maximum gross photosynthetic rates (GP_max) were highest under EC conditions and lowest under ET conditions. Further, ET conditions resulted in decreased rate of dark respiration (R_d), but growth of U. pertusa was higher under ET conditions than under ambient temperature conditions. In order to evaluate external carbonic anhydrase (eCA) activity, photosynthesis was measured at 70 μmol photons m⁻² s⁻¹ in the presence or absence of the eCA inhibitor acetazolamide (AZ), which inhibited photosynthetic rates in all treatments, indicating eCA activity. However, while AZ reduced U. pertusa photosynthesis in all treatments, this reduction was lower under ambient CO₂ conditions (both present and warming) compared to EC conditions (both acidification and greenhouse). Moreover, Chlorophyll a and glucose contents in U. pertusa tissues declined under ET conditions (both warming and greenhouse) in conjunction with reduced GP_max and R_d. Overall, our results indicate that the interaction of EC and ET would offset each other’s impacts on photosynthesis and biochemical composition as related to carbon balance of U. pertusa.