• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.77-90
• /
• 2008

This study was conducted to investigate the influence of chilling temperature and duration at different seeding stages on yield, fruit characteristics and growth of cucumber in a greenhouse. When 20-day-old cucumber were exposed to 0 and 3℃ for 10 hours, 25 and 30% reduction in the main stem elongation rate and 34 and 37% reduction in total leaf area per plant were observed. The reduction in stem elongation and total leaf area was apparently associated with the increases in chilling duration. Exposure of seedlings to 6℃ failed to causes any significant differences in growth as compared to the unchilled plants. Repeated exposure of seedlings to 3℃ chilling for 10 hours per day increased the chilling injury significantly. The seedlings exposed to low temperature for 3 consecutive days exhibited severe injury as compared to the seedlings exposed to chilling treatment only once or twice. Fruit elongation rate was inhibited by approximately 10%, such as 0.59~2.26cm/day, with chilling of 15 hours at 0℃ as compare to 0.61~2.60cm/day in the non-chilled plants. Chilling treatment at 0~3℃ for 10 hours reduced the percentage of marketable fruits by 25~26%. while it increased the percentage of severely bent fruits significantly. Total fruits yield was reduced by 15~25% in cucumber plants when the chilling treatment was given to 20-day-old seedlings and by 22~37% in 30-day-old seedlings. This shows that, Larger seedlings were more sensitive to chilling. Total yield was also influenced by the duration of chilling. Definitely, at 0℃, 5-hour chilling treatment caused 18% of reduction, 10-hour caused 30%, and 15-hour caused 36%, respectively.

• Journal of Magnetics
• /
• v.11 no.3
• /
• pp.111-114
• /
• 2006

We electroplated copper-cobalt thin films on a silicon substrate, which had 150 nm thick copper seed layer. The adhesion between the two metallic layers could be increased by utilizing a proper organic additive, pulse plating technique, and high temperature annealing. The thin films exhibited columnar growth of the deposits and enhanced adhesion. This is attributed to the grain growth mechanism introduced by the additive and annealing.

• Transactions of Materials Processing
• /
• v.13 no.8
• /
• pp.704-709
• /
• 2004

The effect of annealing temperature on microstructures and mechanical properties of the 5052 Al sheets rolled 88% reduction at cryogenic temperature was investigated for the annealing temperature of 150 ~ $300^{\circ}C$, in comparison with those rolled at room temperature. The presence of equiaxed grains, whose size is about 200nm in a diameter, was observed in the alloy deformed 88% and annealed $200^{\circ}C$ for an hour. When compared with the deformation at room temperature, the deformation at cryogenic temperature showed the higher strengths and equivalent elongation after annealing at the annealing temperature below $200^{\circ}C$. However, for annealing above $250^{\circ}C$ materials deformed at cryogenic temperature showed the lower strength than those deformed at room temperature. This behavior might be attributed to the higher rate of recrystallization and growth in materials deformed at cryogenic temperature during annealing, due to the lager density of dislocations accumulated during the deformation.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.4
• /
• pp.174-179
• /
• 2008

Nanosize tungsten powder was synthesized by ultrasonic spray pyrolysis method through a solution containing ammonium metatungstate hydrate $[(NH_4)_6W_{12}O_{39}{\cdot}H_2O]$ and reduction treatment. It was expected the improvement of mechanical properties due to increasing surface free energy and surface activity. Starting solutions with each concentration, reaction temperature and reduction treatment were significantly influenced on the formation of tungsten size and phase. It was found that particle size was decreased with concentration of starting solution and surface tension were decreased. The particle size was increased at thermal decomposition temperature above $600^{\circ}C$ by neck growth of interparticles. Tungsten particles were formed by reduction reaction in atmosphere of hydrogen gas at the temperature above $700^{\circ}C$.

• Journal of Bio-Environment Control
• /
• v.12 no.4
• /
• pp.217-220
• /
• 2003

This study was carried out to investigate the growth response of Pinus densiflora seedling to relatively high day temperature during the container culture in summer season. The experiment was performed with three maximum day temperature regimes, 30~35$^{\circ}C$, 35~40$^{\circ}C$ and above 40$^{\circ}C$ in the PE house. The reduction in plant height was observed since 6 weeks after germination in the seedlings grown at relatively high day temperatures, especially the seedlings at above 40$^{\circ}C$. High temperature also reduced the root collar diameter during growth of the seedlings, therefore 17.3% of the reduction was observed in the seedlings grown at above 40$^{\circ}C$ compared with the seedlings at 30~35$^{\circ}C$. The dry weight of the seedlings grown for 16 weeks was apparently reduced by elevated dat temperature in the PE house, and the seedlings at relatively high day temperature resulted in increased T/R ratio.

• Korean Journal Plant Pathology
• /
• v.13 no.4
• /
• pp.200-204
• /
• 1997

The effect of water potential ($\psi_W$) and temperature on mycelial growth and sclerotial production of Sclerotium cepivorum was determined in potato dextrose agar(PDA) and potato dextrose broth (PDB) adjusted to different $\psi_W$ with NaCI, KCI, sucrose or polyethylene glycol (PEG) at 15, 20 and $25^{\circ}C$. the growth of mycellium was not significantly af. fected by $\psi_W$ values between -1,970 and -2,240J/Kg, but severely decreased lower than -2,240J/Kg. Dry weight was slightly increased at $\psi_W$values between -450 and -2,240 J/Kg. The reduction of dry weight wasslower than the reduction of mycelial growth as the $\psi_W$ decreased. The mycelial growth and dry weight were more severely influenced on PEG amended media than on other osmotica amended media. About 50% reduction of mycelial growth and dry weight was occurred about -1,000 and -2240 J/Kg, respectively. The production of sclerotion of sclerotial production occurred between -450 and -810 J/Kg. Sclerotium was not produced lower than -2,240 J/Kg. Mycelial growth and sclerotial production was better at $25^{\circ}C$ as the $\psi_W$ decreased than at $20^{\circ}C$ which is optimal temperaturein the undmended media. The influence of $\psi_W$ on mycelial growth and sclerotial production of S. cepivorum adjusted with NaCl, KCI sucrose or polyethylene glycol showed similar patterns.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.7
• /
• pp.937-945
• /
• 2010

This study aimed to investigate the effects of dietary zinc (Zn), environmental temperatures and Zn${\times}$temperature interaction on growth, feathering score and mineral composition of broilers. A total of 256 d-old Avian male broiler chicks were randomly allocated to a $4{\times}2$ factorial arrangement with four corn-soybean meal basal diets (containing 44 mg Zn/kg) supplemented with 0, 40, 60 mg/kg Zn (Diets 1, 2 and 3, respectively; 0.8% Ca for these three diets) and non-Zn supplementation, 1.6% Ca (Diet 4) and two temperature conditions (low: 26, 24, $22^{\circ}C$ vs. high: 30, 28, $26^{\circ}C$). All birds were given feathering coverage scores for back, breast, wing, under-wing and tail. The wing and tail were further evaluated for the occurrence and severity of defect feathers. Feathers were then pooled for mineral composition analysis. The results showed that in high temperature conditions, broilers fed Zn-unsupplemented, 0.8% Ca ration (Diet 1) had significantly (p<0.05) lower ADFI and ADG (wk 1-6) than birds under low temperature conditions. However, when the birds were fed 40 and 60 mg/kg Zn supplementation (Diets 2 and 3), the ADFI and ADG in both temperature conditions were not significantly different. In low temperature conditions, the ADFI, ADG (p<0.05), all feather coverage (p<0.01) and tail defect scores (p<0.001) of birds fed Diet 4 (excess Ca) were significantly poorer than those fed Diet 1. More Ca (p<0.05) was retained in the feathers of broilers fed Diet 4 under high temperature conditions. Broilers fed the Zn-unsupplemented ration (Diet 1) had significantly higher feather phosphorus (p<0.01) and potassium (p<0.05) concentrations than those fed the 60 mg/kg Zn-supplemented ration (Diet 3). A reduction of feather phosphorus (p<0.01) and potassium (p<0.05) and higher manganese (p<0.05) concentrations were observed in Diet 4 broilers as compared to those fed Diet 1. Under high temperature conditions, broilers had lower iron (p<0.05) and higher manganese (p<0.05) concentrations in feathers. Broilers kept in high temperature conditions had a higher Zn requirement and 40 mg/kg Zn supplementation was sufficient for the birds to achieve optimum growth. Supplemental Zn ameliorated the adverse effect of high temperature on growth and occurrence of tail feather defects. Excess Ca disrupted Zn metabolism to exert a detrimental effect on growth performance and normal feathering and this was elucidated in the birds kept in low temperature conditions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.4
• /
• pp.395-404
• /
• 1994

Ni-graphite composite powders were prepared by reduction of $Ni^{++}$ from ammoniacal nickel sulfate solution on graphite core by hydrogen gas. Effect of reaction factors on the reduction rate and the properties of nickel layer were investigated by SEM, Optical Microscopy, size and chemical analysis. Induction period, a time lag between the injection of hydrogen gas and the start of the reduction, was 20~110 mins and affected by the reaction temperature and stirring speed. The reduction rate of $Ni^{++}$ was $4.5g/{\ell}/min$ at optimum condition and increased with increasing reaction temperature and stirring speed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.4
• /
• pp.496-506
• /
• 2001

The effect of corona discharge on soot emission was experimentally investigated. Size and number concentrations of soot aggregates were measured and compared for various voltages. Regardless of the polarity of the applied voltage, the flame length decreased and the tip of flame spreaded with increasing voltage. For the experimental conditions selected, the flame was blown off toward the ground electrode by corona ionic wind. When the negative applied voltage was greater than 3kV(for electrode spacing = 3.5cm), soot particles in inception or growth region were affected by the corona discharge, resulting in the reduction of number concentration. The results show that the ionic wind favored soot oxidation and increased flame temperature. Number concentration and primary particle size greatly increased, when the corona electrodes were located the region of soot nucleation or growth(close to burner mouth).

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.108-113
• /
• 1999

In this study, CT specimens were prepared from ASTM A516 Gr. 65 which was used for pressure vessel plates for moderate and lower temperature service. Fatigue crack growth test was carried out in the environment of low temperature of $10^{circ}C, -10^{circ}C, -30${circ}C\;and\;-50^{circ}C$ and in the range of stress ratio of R=0.05 and 0.3 by means of opening mode displacement. Based on these test results, the characteristics from temperature and stress ration were shown as follows. 1) As the stress ratio, R increased da/dN and ${Delta}K$ of 2nd stage gradually decreased. And as R decreased, the effect of temperature became greater and greater. 2) As the temperature descended, da/dN decreased on a certain ${Delta}K$, and ${Delta}K$ did in a same da/dN. And the stress ratio, R exerted greater influence at the lower temperature. 3) The fatigue crack growth constant, m increased at $10^{circ}C$ and $-10^{circ}C$, snd decreased at $-30^{circ}C$ and $-50^{circ}C$ following the increment of stress ratio R. And m increased along with the reduction of temperature greatly decreased at $-30^{circ}C$ to come close to two(2).